Oce TDS320 Manuel utilisateur

Océ TDS320

User Manual

or transmitted in any form or by any means without written permission from

Océ.

Océ-Technologies B.V. makes no representation or warranties with respect to

the contents hereof and specifically disclaims any implied warranties of

merchantability or fitness for any particular purpose.

Further, Océ-Technologies B.V. reserves the right to revise this publication and

to make changes from time to time in the content hereof without obligation to

notify any person of such revision or changes.

Edition 2005-12

Océ-Technologies B.V.

This manual contains a functional and task-oriented description of the Océ

TDS320 multifunctional digital system release 1.0

Trademarks

Products in this manual are referred to by their trade names. In most, if not all

cases, these designations are claimed as trademarks or registered trademarks of

their respective companies.

Safety information

Where applicable, cautions and warnings are used throughout this manual to

draw your attention to safety precautions to be taken.

The safety information for this product is included in a separate Safety manual.

This manual is part of the documentation set that you received with your

product.

Internet

Check Océ on the Internet at www.oce.com for:

■the latest drivers

■product development

Table of Contents 3

Table of Contents

Table of Contents 3

Chapter 1

Introduction

The Océ TDS320 8

The Océ TDS320 concept and components 9

The Océ TDS320 printer 9

The Océ TDS320 scanner 9

The Océ Power Logic® controller 10

Océ TDS320 options 11

Océ TDS320 users 13

User interaction 13

The data flow to the Océ TDS320 15

Chapter 2

Use the Océ TDS320 to print

Printer operator panel 18

Display 19

Menu level indicator 19

Keys 20

How to turn on and turn off the Océ TDS320 printer 21

Cancel a print 22

Menu structure 23

Media type and size on the printer 23

Manual feed 25

Cut media 26

Print info 27

Print the configuration report 27

Print the menu card 27

Print the demo print 28

Configuration 29

Select a language 29

Network settings 29

Paper series 32

Clear set memory 32

Diagnostic mode 32

Status messages 33

4 Océ TDS320 User Manual

Error messages 34

Menu structure of the printer 36

Chapter 3

Use the Océ TDS320 to copy

Scanner operator panel 38

The keys 39

The display 40

Menu level indicator 41

Copy jobs 42

Turn on and turn off the Océ TDS320 scanner 43

Start the copy process 44

Make copies 44

Number of copies 45

Select the use of roll 1 or roll 2 or manual feed 46

Select the input mode 47

To copy sets 47

Specify the zoom factor 48

The exposure settings 48

Deliver originals after scanning 50

Enable automatic feed of the original 50

Define settings for the next original 51

Copy on pre-cut sheets 51

Stop a copy job 54

Set synchro or standard cut 54

Adjust the leading or the trailing strip 55

Mirror-image copies 57

Release original 57

Menu structure of the scanner 58

Chapter 4

Use the Océ TDS320 to Scan to file

Introduction 60

Make a scan 61

Settings to scan 62

Destination 62

Checkprint 63

Resolution 63

File format 64

Optimization 65

Menu structure Océ TDS320 Scanner 66

Océ Scan Manager 67

Table of Contents 5

Tree view 68

Table view 68

Actions from the Océ Scan Manager 70

Destinations 70

Scanned files 74

Manage the temporary store 76

How to retrieve scanned files 77

Get files via FTP 78

Océ View Station LT 79

Menu options 80

Function buttons 81

View error 82

Chapter 5

Install and start Océ Remote Logic® on a workstation

Introduction 84

Installation procedure for MS Windows® systems 85

Installation procedure for Unix systems 87

IBM AIX 88

HP-UX 88

Linux 88

Installation procedure for Other systems 89

Start Océ Remote Logic® on your system 90

Command line parameters 90

How to use the remote system 93

Chapter 6

Océ Power Logic®: The Settings Editor

Introduction 96

How to start up and shut down the controller 97

Océ Settings Editor 98

General structure 99

Menu bar 100

Top toolbar 100

Left toolbar 101

Settings area 101

Status bar 103

How to access the Océ Settings Editor 103

Start Océ Settings Editor 103

How to perform actions from the Océ Settings Editor 104

Key Operator settings 106

System Administrator settings 107

6 Océ TDS320 User Manual

Chapter 7

Printer supplies and maintenance

Media 110

The paper rolls 110

Reload paper 111

How to program media settings 115

How to refill toner 117

Clean the glass platen and the reference roller of the scanner 120

Chapter 8

How to solve problems

Introduction 124

Original jams in scanner 125

Paper jams in the printer 127

Paper jam in the material feed section 127

Paper jam in the fuser section 128

Appendix A

Summary and tables

The Océ TDS320 132

Printer operator panel 133

Scanner operator panel 134

Product specifications Océ TDS320 135

List of available material types and sizes 139

Material types 139

Automatic format selection 141

Summary of standard zoom formats 142

Appendix B

Miscellaneous

Notation conventions 146

Reader’s comment sheet 147

Addresses of local Océ organizations 149

Index 151

Océ TDS320

User Manual

Chapter 1

Introduction

This chapter contains a general introduction to the Océ

TDS320. This chapter describes the main features, the

options and the software applications provided with the

system.

8 Océ TDS320 User Manual

The Océ TDS320

The Océ TDS320 is a wide format, black and white, multifunctional system.

The Océ TDS320 offers a broad range of print, copy, and scan-to-file

functionality. The system includes a printer (1 or 2 rolls), a controller and an

optional scanner.

[1] Océ TDS320

Introduction 9

The Océ TDS320 concept and components

The Océ TDS320 printer

The Océ TDS320 printer is available with an automatic 1- or 2-roll unit and

manual feed. Use manual feed when you want to print a job on a media type or

size that is not available on one of the paper rolls.

Note: The manual feed is a special slot just above the paper drawers on the

printer. You can insert cut sheet material in this slot, one sheet at a time. Refer

to ‘Copy on pre-cut sheets’ on page 51 on how to copy on pre-cut sheets.

Note: Only use material as specified in ‘List of available material types and

sizes’ on page 139.

The Océ TDS320 is a 600 DPI LED printer with a print speed of 1.8 A0 or 3

meters per minute.

You can perform a number of activities at the Océ TDS320 printer. You can set

the media type and size, stop a print job or select your preferred language from

the printer operator panel (see chapter 2, ‘Use the Océ TDS320 to print’ on

page 17 for more details).

The Océ TDS320 is delivered with drivers and job submission software to

enable you to print from AutoCAD®, Windows® or Macintosh® applications.

The Océ TDS320 scanner

The Océ TDS320 scanner supports a wide range of copy activities. It provides

a large number of functions for defining original and copy related settings. You

can specify particular media, feeding and quality enhancement options from

the scanner operator panel. In combination with the Océ TDS320 printer it

forms a powerful productivity tool.

The scanner scans your originals. You can print the originals (copy job) or you

can store the scanned original in a file (Océ Scan Logic®). The scanner has

different quality modes which are provided by Océ Image Logic®.

10 Océ TDS320 User Manual

■Green key principle

The Océ TDS320 is easy to use. Press the green key on the scanner operator

panel to start the basic copy jobs. If you have difficult copy jobs, you change

the default copy settings with the help of the other settings on the scanner

operator panel.

The Océ Power Logic® controller

The Océ TDS320 is equipped with a controller to process the print jobs and the

copy jobs. The controller can have Océ Remote Logic® to make your default

printer settings.

The Océ Power Logic® controller processes the print jobs and the copy jobs. It

also processes the optional scan to file jobs.

■Set processing

When you send a file to the printer, the file is processed once and can be printed

many times. The Océ TDS320 has a set memory to store a maximum of 1000

A0s which allows you to create the same sets that are sorted either by page or

by set.

■Spool memory

The Océ TDS320 has a spool memory which provides a queuing system for

files you want to print. The spool memory allows many users to send the print

jobs to the Océ TDS320 at the same time. The print jobs are put in the print

queue where they wait to be printed. The job that is put first into the queue is

printed first.

■Network connectivity

The Océ TDS320 controls a number of common network protocols. The Océ

TDS320 can be used in many networks like TCP/IP and Novell®.

■Security

You can increase the security level of the Océ Power Logic®Controller from

Standard to Medium or High. The security levels Medium and High are meant

for organizations with special security requirements. For example

governmental organizations, and organizations in the defense or the aerospace

industry.

Table des matières

Autres manuels Oce Imprimante tout-en-un

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Canon

Canon ImageCLASS 2300 Manuel

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur