Observer TSTAT0201CW Manuel utilisateur
616 01 1019 01 6/17/15
Communicating Wall Control
With Wi- FiRCapability
Installation Manual
TSTAT0201CW
U.S. Patent No. 7,243,004
U.S. Patent No. 7,775,452
COMMUNICATING SYSTEM
R
All trademarks are the property of the respective owners.
Wi-Fi®is a registered trademark of the Wi-Fi Alliance Corporation.
261601101901
Safety Considerations 6...............................
Introduction 7.........................................
Quick Start 9.........................................
Set Day and Time 9.................................
Set Schedule for All Days 11.........................
Installation 14........................................
Overview 14.......................................
Check Equipment 15................................
Location 15........................................
Wall Control 15..................................
Remote Room Sensors 16........................
Wiring Considerations 17............................
Shielded Wire 19.................................
Non-communicating equipment 19.................
Mounting 19.......................................
Humidifier Connection 21............................
Bypass Humidifiers 21............................
Fan Powered Humidifiers 21.......................
Commissioning 22....................................
Communicating System Overview 22..................
Selecting Accessories 24............................
Selecting Indoor Unit 24.............................
Equipment Summary 26.............................
Brand Selection 26.................................
Current Software Version 27.........................
Software Updates 27................................
SettingUpRemoteAccessandWi-Fi
®Connection 28...
3
616 01 1019 01
Install/Service Menus – Communicating and
Non-Communicating Mode 30..........................
Equipment Summary Menu 31.......................
Service Menus 32..................................
Status 32........................................
Heat Stage (Furnace) 32........................
Electric Heat (Fan Coil) 32......................
Airflow CFM 32................................
Inducer RPM (Modulating furnaces only) 32.......
Blower RPM (Modulating furnaces only) 33........
Lockout Timer 33..............................
Single-Stage & Two-Stage Heat Pump/AC Status 33
Stage: (Heat/Cool) 33..........................
Defrost 33....................................
Outdoor Coil Temp 33..........................
MultiStage Heat Pump/AC Status 33.............
Stage: (Heat/Cool) 33..........................
Defrost 33....................................
Outdoor Coil Temp 33..........................
Last 10 System Faults 34.........................
Lifetime Run History 35...........................
Cycle Counters 35................................
Run Timers 35...................................
Filter Reminder 26................................
Auto Mode Enable 37...............................
Room Temperature Sensing 38......................
Reversing Valve 39.................................
English/Metric Display 40............................
461601101901
FanonwithW 41...................................
Cooling Lockout 42.................................
Auxiliary Heat Lockout 43............................
Heat Pump Lockout 44..............................
Minimum Cooling Setpoint 45........................
Maximum Heating Setpoint 46........................
Outdoor Air Temperature Offset 47...................
Room Air Temperature Offset 48.....................
Smart Recovery 49.................................
Setpoint Deadband 50..............................
Cycles Per Hour 51.................................
Auto Changeover Timer 52..........................
Time Between Fuel Types 53........................
Humidity Offset 54..................................
Programming On/Off 55.............................
Reset to Factory Defaults 56.........................
Dealer Info 57......................................
Service Reminder 58................................
Install/Service Menus - Communicating Equipment 58.....
Setup Menu 58.....................................
English/Metric Display 59.......................
Airflow 60.......................................
Heating Airflow 60.............................
Furnace / Fancoil Heating Airflow 60.............
Heat Pump Heating Airflow 61...................
Cooling Airflow 62.............................
Dehum Airflow 62..............................
Furnace Airflow (Capacity) Limiting 62............
5
616 01 1019 01
Dehum Drain 63...............................
Off Delay 63..................................
Low Heat Rise 64..............................
Defrost Interval 65.............................
Defrost With Furnace 66........................
Quiet Shift 66.................................
Zones 67.....................................
Zone Weighting 68.............................
Zone Airflow Control 69.........................
Bypass 70....................................
Airflow Capacity 70............................
Damper Type 71...............................
Leaving Air Sensor (LAS) 72.......................
Disable Zoning 72................................
Damper Timing 73................................
HRV - Heat Recovery Maintenance 73..............
Stage Limiting for Multistage Units 73...............
Daughter Board 76...............................
Operational Information 77........................
Auto Mode 77....................................
Setpoint Deadband 77..........................
Offsets 77....................................
Cycles Per Hour 77............................
Programming 78.................................
Smart Recovery 78...............................
Appendix – Wiring Diagrams 79.........................
661601101901
Safety Considerations
Improper installation, adjustment, alteration, service, main-
tenance, or use can cause explosion, fire, electrical shock, or
other conditions which may cause death, personal injury or
property damage. Consult a qualified installer, service
agency or your distributor or branch for information or assist-
ance. The qualified installer or agency must use factory-au-
thorized kits or accessories when modifying this product.
Refer to the individual instructions packaged with the kits or
accessories when installing.
Follow all safety codes. Wear safety glasses, protective
clothing, and work gloves. Have a fire extinguisher available.
Read these instructions thoroughly and follow all warnings
and cautions included in literature and attached to the unit.
Consult local building codes and the current edition of the
National Electrical Code (NEC) NFPA 70.
In Canada, refer to the current editions of the Canadian Elec-
trical Code CSA C22.1.
Recognize safety information. When you see this symbol
on the unit and in instructions or manuals, be alert to the
potential for personal injury. Understand these signal words:
DANGER, WARNING, and CAUTION. These words are
used with the safety-alert symbol. DANGER identifies the
most serious hazards which will result in severe personal
injury or death. WARNING signifies hazards which could
result in personal injury or death. CAUTION is used to
identify unsafe practices which may result in minor personal
injury or product and property damage. NOTE is used to
7
616 01 1019 01
highlight suggestions which will result in enhanced
installation, reliability, or operation.
Introduction
The Observer®communicating system consists of several
intelligent communicating components which includes the
Observer®Wall Control, and Observer System HVAC
equipment such as, variable speed furnace or fan coil,
2-stage AC or HP, which continually communicate with each
other via a four-wire communication bus. Commands, oper-
ating conditions, and other data are passed continually
between components over the communication bus. The res-
ult is an enhanced level of comfort, versatility, and simplicity.
All communicating furnaces or fan coils are variable-speed
and multi-stage for maximum flexibility, efficiency, and com-
fort. They support controlled humidification, dehumidification,
and air quality control. Either an Observer communicating, or
a standard 24VAC controlled outdoor unit may be used.
When using conventional, single-stage outdoor units, the
communicating furnace (single-stage AC unit), or fan coil
(single-stage HP) provides the 24 volt signals needed to con-
trol them. Add the accessory daughter board to the system
to control other types of conventional outdoor units. All sys-
tem components are controlled through the wall mounted
Observer Control, which replaces the conventional thermo-
stat and provides the homeowner with a single wall control
for all features of the system.
The Observer Communicating Control with Wi-FiRnetwork
compatibility allows connection of this system to the Internet
viaahomeWi-Fi
Rnetwork. See the Owner's Manual for in-
formation on connecting the wall control to the home Wi-Fi
861601101901
network, and the MyObserverComfort web server. See later
in these Installation Instructions for information on applying
the accessory NAXA00101WA wireless access point, if the
existing home network is incompatible with this product.
The ability to remotely access and adjust the settings of
the Observer®wall control with the MyObserverComfort
web and mobile applications is dependent on the com-
patibility of the user’s computer/network or mobile de-
vice, the Observer wall control, and/or the MyObserver-
Comfort web server with, and the availability of, the
user’s Internet service provider or mobile device carrier
service. International Comfort Products makes no repre-
sentations or warranties, express or implied, including,
to the extent permitted by applicable law, any implied
warranty of merchantability or fitness for a particular
purpose or use, about the compatibility of the user’s
computer/network, or mobile device, with the Observer
wall control, and/or the MyObserverComfort web server,
with,andtheavailabilityof,theuser’sInternetservice
provider or mobile device carrier service, or that the
ability to remotely access and adjust the settings of the
Observer wall control will not be negatively affected by
the network-related modifications, upgrades, or similar
activity of the user’s Internet service provider or mobile
device carrier service.
9
616 01 1019 01
Quick Start
For first time installers, Quick Start will allow a quick start up
of the Observer®Control before learning all the details of
system operation. However, for the best possible comfort
and operation refer to the Owner’s Manual.
Set Day and Time
NOTE: See the Owner's manual for instructions on utilizing
Internet time for date and time synchronization.
To set the current time and date, press SETUP;thenpress
TIME/DATE.
10 61601101901
A14558
Under date, you can select the month, day, or year buttons;
then use the ▲and ▼to select the appropriate date. . Un-
der time, you can select the hour, minute, and am/pm; then
use the ▲and ▼to select the appropriate time. You also
have the option of selecting between a 12 HR or 24 HR clock
format. Finally, you can choose whether you observe day
light savings time by pressing the ON or OFF button. Press
Autres manuels pour TSTAT0201CW
2
Table des matières
Autres manuels Observer Thermostat
Manuels Thermostat populaires d'autres marques
EWELLY
EWELLY EW-181 Manuel utilisateur
Prolon
Prolon T1100 Instructions d'installation
Computherm
Computherm Q20 Manuel utilisateur
Heatmiser
Heatmiser neoStat Manuel utilisateur
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur
