OAK Environmental Express PH250 Manuel utilisateur

PH250

PH260

pH/ORP METER

CODE:M003808-3200828205-GZ0000581078

• Preface

This manual describes the operation of the following instrument.

Be sure to read this manual before using the product to ensure proper and safe operation of

the product. Also, safely store the manual so it is readily available whenever necessary.

Product specifications and appearance, as well as the contents of this manual are subject to

change without notice.

• Warranty and responsibility

Oakton Instruments. warrants that the product shall be free from defects in material and

workmanship and agrees to repair or replace free of charge, at option of Oakton Instruments.,

any malfunctioned or damaged product attributable to responsibility of Oakton Instruments. for

a period of Three (3) years from the delivery unless otherwise agreed in a written statement. In

any one of the following cases, none of the warranties set forth herein shall be extended:

• Any malfunction or damage attributable to improper operation

• Any malfunction attributable to repair or modification by any person not authorized by Oak-

ton Instruments.

• Any malfunction or damage attributable to the use in an environment not specified in this

manual

• Any malfunction or damage attributable to violation of the instructions in this manual or

operations in the manner not specified in this manual

• Any malfunction or damage attributable to any cause or causes beyond the reasonable

control of Oakton Instruments. such as natural disasters

• Any deterioration in appearance attributable to corrosion, rust, and so on

• Replacement of consumables

Oakton Instruments. SHALL NOT BE LIABLE FOR ANY DAMAGES RESULTING FROM ANY

MALFUNCTIONS OF THE PRODUCT, ANY ERASURE OF DATA, OR ANY OTHER USES OF

THE PRODUCT.

• Trademarks

• Microsoft, Windows, Windows Vista are registered trademarks or trademarks of Microsoft

Corporation in the United States and other countries.

Other company names and brand names are either registered trademarks or trademarks of the

respective companies. (R), (TM) symbols may be omitted in this manual.

Brand: OAKTON

Series name: Water Quality Meter

Model: PH250, PH260

Model description: pH/ORP Meter

Regulations

• Regulations

• EU regulations

• Conformable standards

This equipment conforms to the following standards:

Warning: This product is not intended for use in industrial environments. In an

industrial environment, electromagnetic environmental effects may

cause the incorrect performance of the product in which case the

user may be required to take adequate measures.

• Information on disposal of electrical and electronic equipment and disposal

of batteries and accumulators

The crossed out wheeled bin symbol with underbar shown on the product or accompanying

documents indicates the product requires appropriate treatment, collection and recycle for

waste electrical and electronic equipment (WEEE) under the Directive 2012/19/EU, and/or

waste batteries and accumulators under the Directive 2006/66/EC in the European Union.

The symbol might be put with one of the chemical symbols below. In this case, it satisfies

the requirements of the Directive 2006/66/EC for the object chemical. This product should not

be disposed of unsorted household waste. Your correct disposal of WEEE, waste batteries and

accumulators will contribute to reducing wasteful consumption of natural resources, and

protecting human health and the environment from potential negative effects caused by

hazardous substance in products.

Contact your supplier for information on applicable disposal methods.

EMC: EN61326-1

Class B, Basic electromagnetic environment

RoHS: EN50581

9. Monitoring and control instruments

Regulations

III

• Authorised representative in EU

Cole-Parmer UK

9 Orion Court, Ambuscade Road

Colmworth Business Park

St Neots

Cambridgeshire

PE19 8YX, United Kingdom

Phone: +44-(0)1480-272279

Fax: +44-(0)1480-212111

Email: sales@coleparmer.co.uk

www.coleparmer.co.uk

• FCC rules

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Responsible Party for FCC matter

Oakton Instruments

625 East Bunker Court,

Vernon Hills, IL, 60061, USA

Tel: 1-888-462-5866

Note

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at his own expense.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

For Your Safety

• For Your Safety

• Hazard classification and warning symbols

Warning messages are described in the following manner. Read the messages and follow the

instructions carefully.

• Hazard classification

• Warning symbols

This indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury. This is to be

limited to the most extreme situations.

This indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

This indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury. It may also

be used to alert against unsafe practices.

Description of what should be done, or what should be

followed.

Description of what should never be done, or what is

prohibited.

For Your Safety

VII

• Safety precautions

This section provides precautions for using the product safely and correctly and to prevent

injury and damage. The terms of DANGER, WARNING, and CAUTION indicate the degree of

immanency and hazardous situation. Read the precautions carefully as it contains important

safety messages.

• Instrument and electrode

Do not disassemble or modify the instrument. Otherwise, it may heat up or be ignited

resulting in a fire or an accident.

Harmful chemicals

Some electrodes are used with hazardous standard solutions. Handle them with care.

The internal solution of pH electrode is highly concentrated potassium chloride (3.33

mol/L KCl). If the internal solution comes in contact with the skin, wash it off

immediately. If it gets into the eyes, flush with plenty of water and then consult a

doctor.

Broken glass

Broken glass may cause injury. The outer tube and tip of an electrode are made of

glass. Handle them with care.

Do not use the phono jack under wet or humid conditions. Otherwise, it may cause a

fire, electric shock, or breakage.

For Your Safety

VIII

• Battery

Keep batteries out of reach of children. If someone accidentally swallows a battery,

consult a doctor immediately.

If alkaline fluid from a battery gets into the eyes, do not rub the eyes, rinse with clean

water immediately and then consult a doctor. Contact with alkaline fluid could cause

blindness.

Do not put batteries in a fire, expose to heat, disassemble or remodel.

Doing so can case fluid leakage, overheating or explosion.

Product Handling Information

• Product Handling Information

• Operational precautions (instrument)

• Only use the product including accessories for their intended purpose.

• Do not drop or physically impact the instrument.

• The instrument is made of solvent-resistant materials but that does not mean it is resistant

to all chemicals. Do not expose the instrument in strong acid or alkali solution, or wipe with

such solution.

• If the instrument is dropped into water or gets wet, wipe it using soft cloth. Do not heat to

dry it.

• The instrument has a dust-proof and waterproof structure i.e., the instrument does not

malfunction even when immersed in water of 1 m depth for 30 minutes. This does

guarantee non-destructive, trouble-free, dust-proof, and waterproof performance in all

situations.

• When replacing the batteries or when a serial cable connected, the instrument does not

have the dust-proof and waterproof performance. The dust-proof and waterproof

performance is maintained only when the covers are attached correctly.

• After replacing the batteries or removing the serial cable connected, make sure that the

waterproof gasket attached to the cover is not deformed or discolored, or has foreign

matter adhering to it. If the waterproof gasket is deformed, discolored or has foreign matter

adhering to it, dust could get inside, water leaks could occur that could lead to instrument

malfunction.

• To disconnect an electrode or serial cable, hold the connector and pull it off. If you pull at

the cable, it may cause breakage.

• The phono jack communication between the instrument and a personal computer (referred

to as PC in the rest of this document) may fail because of environmental conditions, such

as electromagnetic noise.

• Do not replace the batteries in a dusty place or with wet hands. Dust or moisture could get

inside the instrument, possibly causing instrument malfunction.

• Do not use an object with a sharp end to press the keys.

• If the power supply is interrupted while measurement data is being saved in the instrument,

the data could be corrupted.

• A NiMH rechargeable battery can be used in this instrument.

• Operational precautions (battery)

• Do not short circuit a battery.

• Position the + and side of the battery correctly.

• When the battery has depleted or the instrument will not be used for a long time, remove

the batteries.

• Of the specified battery types, make sure to use two batteries of the same type.

• Do not use a new battery together with a used battery.

• Do not use a fully charged nickel-metal hydride battery together with a partially charged

battery.

• Do not attempt to charge a non-rechargeable battery.

Product Handling Information

• Environmental conditions for use and storage

• Temperature: 0 °C to 45 °C

• Humidity: under 80% relative humidity and free from condensation

• Avoid the following conditions:

• Strong vibration

• Direct sunlight

• Corrosive gas environment

• Locations close to an air-conditioner

• Direct wind

• Transportation

When transporting the instrument, repackage it in the original package box. Otherwise, it may

cause instrument damage.

• Disposal

• Standard solution used for the calibration must be under neutralized before the disposal.

• When disposing of the product, follow the related laws and regulations of your country for

disposal of the product.

Ce manuel convient aux modèles suivants

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur