Nux Trident Instructions de montage

Table des matières

Autres manuels nux Pédale musicale

Manuels Pédale musicale populaires d'autres marques

Behringer

Behringer ULTRA WAH UW300 Manuel utilisateur

Whirlwind

Whirlwind oc-bass Manuel utilisateur

Strymon

Strymon Lex-rotary Manuel utilisateur

Behringer

Behringer PB600 Manuel utilisateur

Lexicon

Lexicon MX200 Manuel utilisateur

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Manuel utilisateur

Matthews Effects

Matthews Effects Whaler V2 Manuel utilisateur

Grid 1

Grid 1 Pedal Jeanie Manuel utilisateur

Amptweaker

Amptweaker tightboost Manuel utilisateur

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Manuel utilisateur

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Manuel utilisateur

BYOC

BYOC Analog Chorus Manuel

Dimavery

Dimavery EPVP-50 Manuel utilisateur

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Manuel utilisateur

Pro-MIDI

Pro-MIDI G25 Manuel utilisateur

DW

DW 7000 Manuel utilisateur

FAMC

FAMC Liquid-Foot Jr. Series Manuel utilisateur

Dimavery

Dimavery EPOD-50 Overdrive Manuel utilisateur

NUX Trident Firmware Update Guide

!

Recipe

Computer running either Windows 7 or later or MacOS 10.10 or later.

the NUX Trident.

USB-C data/sync cable (Included).

NUX ACD-006A Power Supply (Included).

Quality USB-C to USB adapter (If your computer only comes with USB-C ports.)

A little patience. 1

!

Step by Step Guide

0. Download the firmware update kit & Install the NUX Device Updater.

Download the firmware update kit from the NUX Trident product page.

Unzip the downloaded file to a directory of your choice.

Install the NUX Device Firmware Updater. 2

1. Connect the NUX Trident to your computer and put it into DFU mode.

Connect the Trident to your Mac or PC using the included USB-C cable. 3

Run "NUX Device Updater", you will see the following interface:

Press and hold both the UP footswitch and the REVERB footswitch while turning on power,

release both footswitches when you see all the indicators on the NUX Trident turns on. The

prompt message "(No device found)" will change to "NUX - Trident - Device connected. ",

meanwhile the display on Trident shows .

2. Select the new firmware file(.bin) and start upgrading the firmware.

Select the new firmware file, the file name varies depending on the firmware version. However,

the file extension will always be '.bin'.

WARNING:

Please make sure that the selected firmware file is actual for the NUX Trident, Otherwise,

you may brick your pedal or cause it to malfunction.

Do NOT disconnect or power off the NUX Trident during the upgrade.

After the firmware is selected, click "Start Update" to continue.

It takes rouhly 30 minutes to finish, during the process the display on Trident shows

Sit back, relax and have a cup of coffe.

Once the firmware is successfully upgraded, the following alter window should pop out notifying

you that the upgrade is done. Meanwhile, the display on Trident shows .

3. Finish Updating

close the "NUX Device Updater"

Disconnect the USB cable, and turn off the power.

Grap your guitar/bass and try out the new features and tones.

Make sure to also download & install the new version of editor software as Firmware and

editor software are paired to work together.

1. If you encountered any problem upgrading the firmware, please contact us email us @ [email protected] or [email protected] ↩

2. The latest version(V2.1.12.30) by far requires installation. ↩

3. In case of the included USB-C failed, please try with another USB-C data/sync cable. It's also important to disconnect all other USB MIDI devices and USB

audio devices from you computer before connecting the NUX Trident to your computer. ↩