Nuocai NC-DX0406 Manuel utilisateur
1
NC-DX0406(2018) User Manual
NC-DX0406(2018 )
http://wap.happycolor.com.cn
Guangzhou Nuocai Digital Products Co.,Ltd
2
1. Warning:
Please read this description carefully before using the machine
1.1. Machine should not be used by children or the disabled.If needed,please under the supervision
1.2. Please use original supplier’s spare parts and ink under instruction
1.3. Make sure the power voltage is same as power cable and machine which shown on the Nameplate
1.4. Only suitable to be used indoors and better suggest to have air conditioning inside the room to
keep stable working temperature and humidity
1.5. Dismantle the wooden case and the foot cup fixed frame and put it on a stable table before using
1.6. Do not use the machine in a environment which has fire,dust and wetness
1.7. Do not use the machine in a humid house
1.8. Do not put sundries on the machine itself,machine printing table and surroundings
1.9. Please keep a stable temperature in the working room,not suggest to use machine where environment over 30
degrees or below 15 degrees
1.10. Do not use any broken cable to provide electricity
1.11. If power supply is broken,please stop to using the machine
1.12. Power off machine when u clean or fix machine
1.13. Please use the machine according to local legal policy
1.14. Make sure the head not touch anything before sending picture printing.Height sensor do not
work when meets transparent materials
1.15. When machine is working,eyes will feel sick if staring at the uv lamp for a long time,better suggest to wear
ultraviolet-proof glasses
1.16. When needed to move the machine,at least require 4 people to lift.Do not move the machine together with
other machine parts.And remember to take take off the power charger when move the machine
1.17. When add ink,may touch ink tube,ink bottle and ink cap and some parts,please protect in advance
1.18. The table which used to put the machine should be make sure it’s stability to place the machine and protect
machine from shaking during working
1.19. Not suggest to use UV LED lamp high load printing for a such long working time
3
1.20. Make sure machine is normally grounded
1.21. Do not use the machine in thunderstorm day,avoid lightning strikes
1.22. If your ink is not come from Nocai,after sale service will not be provide
4
2. Machine recognition-Graphics Analysis
2.1 Machine Front View
1Printing table：Put the printing materials, the maximum length is 61cm,and Maximum width is
50cm,the maximum printing size is 60*40cm,template can be made to improve working efficiency.
②Panel control pane：Adjust and set up machine’s operation and internal parameter.
③Capping station：Cleaning unit.
④Waste ink bottle: Collect the waste ink.
⑤Cart: Machine working and printing unit.
⑥Ink tank：Put ink in stock, has the white ink stir and ink lock alarming system.
5
2.2 Machine Back View
①Machine switch: Switch button.
②Power charger: Connect power box to supply power for printer.
③Platform motor: Control platform to move the motor.
④Platform motor driven wheel: Platform motor energy transmission,driven by drive wheel.
⑤Main board: Machine working control board.
6
2.3 Machine Capping System View
①Wiper sensor: Locate the wiper original position.
②Wiper: Clean the surface of the head after automatic cleaning.
③Cap top: Suck ink,clean and protect the head.
④Ink pump: Ink sucking, the left one is color ink pump, the right one is white ink pump. Speed can be adjusted
at the back of pump.
⑤Wiper motor: Supply power for wiper.
⑥Power button: Open or close machine
⑦Panel board: Operate machine and set up machine parameter.
7
2.4 Panel board View
①Bridge up button: Raise the bridge.
②Bridge down button: Down the bridge.
③Carriage left button: Make the carriage move to the left side.
④Carriage right button: Make the carriage move to the right side.
⑤Platform front button: Make the platform move to the front side.
⑥Platform back button: Make the platform move to the back side.
⑦Machine control panel: Show the machine parameter.
⑧Test hot key button: Nozzle test.
⑨Clean hot key button: Automatic cleaning.
⑩Print pause button: Pause the printing job.
⑪Set up Exit button: Exit the menu.
⑫Set up enter button: Menu set up enter.
8
2.5 Cart View
①Print head: Output the ink,head condition directly affect printing quality
②Big UV lamp: Dry the white and color ink
③Damper: Guarantee the continuous supply of ink and filter impurities
④Machine connection,data transmission and ink jet system
⑤Ink exhaust fan: Exclude the flying ink during printing
⑥Carriage original position sensor: Carriage right limit
9
2.6 Carriage Beam View
①Belt tension screw: Adjust screw tension can tension the belt
②Encoder strip: Provide accurate printing size for machine
③Original position sheet: An sheet of original sensor
④Carriage lock sheet: Shut down or during transportation lock the carriage
⑤Bridge motor: Control printing carriage to move
⑥Belt: Bridge motor belt
10
2.7 Machine Right Side View
①UP limit sensor: Machine bridge up maximum
②Down limit sensor: Machine bridge down maximum
③Up and down siding roof metal sheet: Use roof sheet metal to avoid the bridge move down to the limit when
the down limit sensor is broken
④Up and down slide: Up or down the track
⑤Up and down siding: Up or down metal sheet
Table des matières
