Novus NVH-SD40EH-C Manuel utilisateur

NVH-SD40EH-C

NVH-SD40EH-S

u s e r ’s m a n u a l

NVH-SD40EH - user’s manual version 1.2

WARIGS

ATTETIO!

THE KNOWLEDGE OF THIS USER’S MANUAL IS AN INDESPENSIBLE

CONDITION OF A PROPER DEVICE OPERATING. YOU ARE KINDLY

REQUESTED TO FAMILIARIZE YOURSELF WITH THIS MANUAL BEFORE

STARTING THE DEVICE. THE MANUAL SHOULD BE KEPT FOR FUTURE USE.

CAUTIO!

PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT PROVISIONED FOR THE

GIVEN PRODUCT IN ITS USER’S MANUAL AND OTHER DOCUMENTS DELIVERED

WITH THE PRODUCT, OR THAT ARISES FROM THE NORMAL APPLICATION OF

THE PRODUCT, ITS MANUFACTURER MUST BE CONTACTED OR THE

RESPONSIBILITY OF THE MANUFACTURER FOR THE RESULTS OF SUCH AN

ACTION SHALL BE EXCLUDED.

IMPORTAT SAFEGUARDS AD WARIGS

1. R ad, k p, and follow th s instructions. All th saf ty and op rating instructions

should b r ad b for th product is op rat d.

2. H d all warnings. All warnings on th product and in th instruction manual should

b adh r d to.

3. Follow all th saf ty instructions in this manual. Improp r installation and brack t

op ration may hav impact on op rator saf ty as w ll as brack t op rational r liability

and working lif .

4. All th brack t installations and op rations should b don according to this us r’s

manual.

5. Unplug th unit b for maint nanc activiti s.

6. Only us attachm nts / acc ssori s sp cifi d by th manufactur r.

7. Installation and s rvicing should b don only by th qualifi d s rvic p rsonn l and

conform to all local cod s.

8. This product should b op rat d only from th typ of pow r sourc indicat d on th

marking lab l. If you ar not sur of th typ of pow r suppli d to your location, consult

your product d al r. Do not ov rload pow r supply and xt nsion cords as this can

r sult in a risk of fir and/or l ctronic shock.

9. Pow r cords and cabl s should b l d in a mann r prot cting th m from damag by

b ing walk d on or pinch d by it ms plac d upon or against th m.

NVH-SD40EH - user’s manual version 1.2

WARIGS

10. As w ll signal and pow r cabl s should b quipp d with surg prot ction d vic s. This

will pr v nt damag to th quipm nt du to lightning or pow r-lin surg s.

11. Do not ov rload wall outl ts and xt nsion cords as this can r sult in a risk of fir or

l ctric shock.

12. Th r ar no us r-s rvic abl parts insid this unit. Only authoriz d s rvic p rsonn l

may op n th unit.

13. Unplug th unit and r f r s rvicing to qualifi d s rvic p rsonn l und r th following

conditions:

a. Wh n th pow r supply cord or plug ar damag d.

b. If liquid has b n spill d or obj cts hav fall n into th unit.

c. If th unit do s not op rat normally by following th op rating instructions.

. If th unit has b n dropp d or th cabin t has b n damag d.

f. Wh n th unit xhibits a distinct chang in p rformanc - this indicat s a n d

for s rvic .

14. Do not att mpt to s rvic th housing yours lf as op ning or r moving cov rs may

xpos you to dang rous voltag or oth r hazards. R f r all s rvicing to qualifi d

s rvic p rsonn l.

15. Aft r any s rvic op rations t st th unit and all attachm nts / acc ssori s functionality.

IFORMATIO

Data includ d in th following us r’s manual is up to dat at th tim of printing.

Novus S curity Sp z o.o. holds xclusiv rights to modify this manual. Th produc r r s rv s

th rights for d vic sp cification modification and chang in th d sign without prior notic .

NVH-SD40EH - user’s manual version 1.2

MAI CHARACTERISTICS

1. MAIN CHARACTERISTICS

♦ Ext rnal housing for th Cama-I s ri s sp d dom cam ras.

♦ Th body and sunshi ld (in th outdoor sp d dom ) mad of aluminium with powd r

coating in b ig colour, th int rnal parts ar construct d of st l, th bulb mad of

plastic (acryl).

♦ Built-in h at r and fan allow op rating in wid t mp ratur rang : from - 45°C to 50°C.

♦ Th housing m ts IP66 standards for dust and moistur r sistanc .

♦ Th housing is d sign d to b mount d on th wall, in-c iling, pol and in th corn r

thanks to us various adapt rs and brack ts.

♦ Th wir with th snap hook prot cting against collapsing during th installation.

♦

Th brack ts s n on th abov pictur ar not includ d in th s t.

2. CONTENTS OF THE PACKAGE

Th following it ms should b in th s t:

Housing: 1 pcs

Us r’s manual: 1 pcs

Bundl of cabl s with th t rminal block conn ctors (install d in th housing) 1 pcs

Scr ws for cam ra mounting: 1 pcs

Torx L-Wr nch: 1 pcs

If th quipm nt has b n damag d during transport or is incompl t , th cont nts of packag

should b pack d back to th original box. Contact th local NOVUS distributor for furth r

assistanc .

NVH-SD40EH - user’s manual version 1.2

3. SPECIFICATIOS

3.1 External di ensions

- Th dim nsions of th housing in conn ction with optional wall brack t

VB-SD40PWB/230 (not includ d in s t)

SPECIFICATIOS

Model NVH-SD40EH-C NVH-SD40EH-S

Type external

Mount type wall (also in corner by eans of adapter), in-ceiling and pole thanks to use various adapters

and brackets

Con truction

material body - alu iniu , internal parts ade of steel, bulb - acryl

Hou ing color beige

Bulb clear

smok

Heater yes

Fan yes

Degree of

protection IP66

Power upply 24 VAC

Power

con umption 50W - heater, 3W - fan

Operating

temperature -45°C ~ 50°C

Dimen ion (mm) 234 (

) x 278 (H) (the di ensions in details find below)

Weight 2.9 kg

In et included housing, sunshield, torx, screws, user’s anual

NVH-SD40EH - user’s manual version 1.2

- Th dim nsions of th housing in conn ction with optional wall brack t

VB-SD40WB (not includ d in s t)

- Th dim nsions of th housing in conn ction with optional c iling brack t

VB-SD40CB (not includ d in s t)

SPECIFICATIOS

NVH-SD40EH - user’s manual version 1.2

SPECIFICATIOS

3.2. Parts list

Base module

Heater module

H at r modul in d tails

Bas cam ra in d tails

Connector base of

Speed dome camera

(part of speed dome

camera)

M4x8 BH camera

machine screw

NVH-SD40EH - user’s manual version 1.2

SPECIFICATIOS

o a e Quantity

1 Bundl of cabl s with th t rminal block conn ctors 1

2 Plastic bushing 1

3 M4x5 PH machin scr w 5

4 Aluminium sunshi ld 1

5 “A” saf ty wir 1

6 DAPG-16 plastic bushing 1

7 “A” scr w spac r 4

8 Body 1

9 Silicon rubb r gask t 1

10 “B” saf ty wir 1

11 M3x6 FH2 tapping scr w of “B” saf ty wir 1

12 M3x8 PH machin scr w of h at r’s modul 3

13 Bubbl ring, ABS 1

14 M3x5 NPH tapping scr w 1

15 O-ring silicon 1

16 M4x17 TORX scr w 4

17 Acrylic bubbl , gaug 2.5 mm 1

18 Fan 1

19 Cam ra bas 1

20 M4x8 PH machin scr w of bas modul 3

21 M5x14 PH tapping scr w of fan 2

22 MSWR scr w spac r 3

23 H at r brack t 1

24 PCB M3x4.5 PH machin scr w of h at r’s modul 4

25 Fan & h at r board 1

26 H at r 1

27 M3x4.5 PH machin scr w of h at r 2

NVH-SD40EH - user’s manual version 1.2

SPECIFICATIOS

Clamps for conn cting

pow r supply of th

h at r

Clamps for conn cting

pow r supply of th fan

Clamps for manual starting th

h at r, for xampl by r lay output

in th cam ra.

Clamps for conn cting

pow r supply of th

board

3.3. The location of the ele ents on the heater’s board.

Th housing is quipp d with a fan and a h at r which is controll d by th rmostat.

Th rmostat of th h at r is s t to turn it on at 4˚C (±5˚C) and to turn it off from 15˚C (±5˚C).

Th fan op rat s continuously whil housing is pow r d. It provid s good air circulation

insid th housing.

Th rmostat, additional l ctronic l m nts and conn ctors ar locat d on th board fast n d

to th h at r brack t. Th h at r is fast n d to th sam h at r brack t. Th fan is locat d

abov th bas of sp d dom cam ra.

Both th h at r and th fan ar conn ct d to th right conn ctors on th board by d fault

that’s why during installation conn ct just th pow r and th ground using th availabl

conn ctors in th t rminal block of bas cam ra. B n ath th r is a vi w of board with

th d scription of conn ctors.

Although th housing and th cam ra ar suppli d with alt rnat curr nt and th polarization

is not significant ach input is appropriat ly d scrib d AC+ i AC - .It is r comm nd d to

conn ct th sam phas to th prop r conn ctors of pow r in s v ral r c iv rs (for xampl

cam ras and housings) particularly if on transform r suppli s mor than on cam ra.

Th conn ctor nam d FG is a ground conn ctor. Th conn ctor with similar sign is locat d

on th block of conn ctors in th cam ra.

NVH-SD40EH - user’s manual version 1.2

SPECIFICATIOS

3.4. The description of color cables

Th housing is accompani d by 45cm long bundl of cabl s. It is utiliz d to conv ni nt

conn ct chos n signals and pow r. Th shap of cross-s ction and th diam t r ar adjust d

to th bushing scr w in th housing. Thanks to it th cabl conn ction in th housing is l ak

proof.

Additionally, thanks to conn ctors at th nd of cabl th installation and conn ction with

th NVB-SD40PWB/230 brack t which has compatibl conn ctors is conv ni nt.

Th bundl of cabl consists of 16 colour cabl s with th conn ctors at on nd and

sold r d cabl and BNC coax cabl at th oth r.

In cas of using mor alarm inputs in th cam ra it is d mand d to put th additional

cabl s outsid th bundl .

Cable’s colour Function

Brown-whit 24 VAC - , pow r supply of h at r and fan modul

Black-whit 24 VAC + , pow r supply of h at r and fan modul

R d COM1, common output for th r lay no 1

Brown NC1, normally clos d mod for th r lay no 1

Black NO1, normally op n mod for th r lay no 1

Gr y AL1, alarm input no 1

Blu AL1, alarm input no 2

Gr n AL1, alarm input no 3

Y llow AL1, alarm input no 4

Orang GND for th alarm inputs

R d-whit 24 VAC + , Pow r supply of th cam ra

Orang -whit 24 VAC - , Pow r supply of th cam ra

Y llow-whit FGND

Gr n-whit RX- (TX-), control RS-485

Gr y-whit RX+ (TX+), control RS-485

Blu -whit GND

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Novus Caméra de sécurité

Novus

Novus NVIP-4H-6522M/F Manuel utilisateur

Novus

Novus NVIP-4SD-6540/25/F-II Manuel utilisateur

Novus

Novus NVIP-2VE-6601-II Manuel utilisateur

Novus

Novus NVIP-2VE-6632M Manuel utilisateur

Novus

Novus NVC-11BD Manuel utilisateur

Novus

Novus NVIP-2DN3134V/IR-1P Manuel utilisateur

Novus

Novus NVIP-2VE-6202 Manuel utilisateur

Novus

Novus NVIP-2DN5001D/IR-1P Manuel utilisateur

Novus

Novus NVIP-4SD-6543/25/F Manuel utilisateur

Novus

Novus NVIP-1DN5000H/IR-1P Manuel utilisateur

Novus

Novus NVIP-2H-4231/PIR Manuel utilisateur

Novus

Novus NVAHD-1DN3101H/IR-1 Manuel utilisateur

Novus

Novus NVIP-2V-6401 Manuel utilisateur

Novus

Novus NVIP-2H-6231-II Manuel utilisateur

Novus

Novus NVIP-4SD-6550/30/F Manuel utilisateur

Novus

Novus NVIP-2H-6402M Manuel utilisateur

Novus

Novus NVIP-8H-6402M/F Manuel utilisateur

Novus

Novus NVC-401H/IR Manuel utilisateur

Novus

Novus NVIP-7000 series Manuel utilisateur

Novus

Novus NVIP-2VE-4231 Manuel utilisateur

Novus

Novus NVIP-4SD-6550F Manuel utilisateur

Novus

Novus NVIP-4DN2001V/IR-1P Manuel utilisateur

Novus

Novus NVIP-4DN2004V/IR-1P-II Manuel utilisateur

Novus

Novus NVIP-2VE-6401 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur