ACO203 / ECO203
15
EN
Pos:26/RVT/TechnischeDaten/Ladegerät@ 0\mod_1381215657501_18.docx@ 1310@ @1
Battery charger
For information on the function and operation of the battery charger and the rechargeable batteries,
please consult the battery charger operating instructions.
Pos:27/RVT/Kurzbeschreibung/Pressautomatik/ACO/ECO/202/203@ 1\mod_1424269079338_18.docx @ 9192@ 12@ 1
7 Brief description of the press device
7.1 Automatic press cycle (Fig. 1)
The device features an automatic press cycle. This ensures that the pressing operation is always
completed. The automatic press cycle is activated after approx. 1.5 seconds. After the automatic press
cycle has been triggered, the green LED (2) goes out and the pressing operation runs automatically.
The pressing operation can then only be stopped by pressing and holding release button (5). After the
pressing operation has been completed, the motor automatically switches off and the green LED (2)
lights up again.
If the start button (1) is released before the automatic press cycle begins, the piston in the press
device moves back to its starting position. The pressing operation will not have been completed. The
pressing operation must be triggered again.
Pos: 28 /RV T /K ur z bes chr eib ung / E ntl a stu ng s kno pf /AC O1 0 2, ACO152, ACO/ EC O 2 02, ACO2 02X L @ 0\ m od _13 82 4 25 726 24 4 _1 8. doc x @ 1401 @ 2 @ 1
7.2 Release button (Fig. 1)
The pressing operation can be stopped at any time by pressing and holding the release button (5).
The piston in the press device then returns to its starting position.
Pos: 29 /RV T/Kurz beschr eibung/Pre ssstelle nbeleuc htungACO /ECO2 03 @ 1\mod_142908 022344 3_18.docx @ 11377 @ 2 @ 1
7.3 Pressing point lighting
When the start button (1) is pressed, the pressing point is lit by 2 LEDs (12). If the press device is out
of use for approx. 30 seconds, the device and the LEDs switch off.
Pos: 30 /RV T /K ur z bes chr eib ung / A kk u al lg e mei n/Ü ber s chr if t /AC O/ EC O 2 02, ACO/ ECO 20 3 @ 0\ m od_ 13 8 24 47 455 1 93 _ 18. doc x @ 1465 @ 2 @ 1
7.4 Battery (ACO203 only)
Pos: 31 /RV T /K ur z bes chr eib ung / A kk u al lg e mei n/ Inf o: nicht gela d en + Temp er at ur en/ AC O1 02 , AC O 15 2, ACO/ ECO 20 2, ACO2 0 2X L, A F P/ EFP 20 2, AXI/AAP102@ 0\mod_1382448018047_18.docx@ 1473@ @ 1
Information!
The batteries are not charged at the factory.
Therefore:
– Charge the batteries before using for the first time.
Information!
Limited temperature range for charging and storing the batteries.
Therefore:
– It is imperative that the operating instructions for the battery charger are complied
with.
Pos: 32 /RV T /K ur z bes chr eib ung / A kk u al lg e mei n/ A k ku abnehm en + au fs et ze n/ ACO 1 02 , ACO15 2, ACO/ ECO 20 2, ACO2 0 2X L, A F P/E FP 20 2 @ 0\ m od_1382442983216_18.docx @ 1433@ @1
Removing the battery (Fig. 2)
Push in (1) the two release buttons (A) and then remove the battery (2).
Inserting the battery (Fig. 3)
Slide the battery into the device as illustrated until it clicks into place.
Pos:33/RVT/Kurzbeschreibung/Akkuallgemein/AkkuZustandsanzeige/ACO/ECO202, ACO202XL, ACO/ECO203 @ 0\mod_1382445046754_18.docx@ 1446@ @1
Battery charge indicator (Fig. 2)
The battery charge is displayed when button (B) is pressed. The number of LEDs lit up denotes the
battery charge. One flashing LED indicates a maximum power reserve of 10%. The battery must be
charged soon.
If the battery is inserted in the press device while the battery charge is being checked, the last
pressing operation must have been completed at least 1 minute prior to this. Otherwise the display will
be inaccurate.
Pos: 35 /R VT /Kur z beschr eib ung/ Ger ät + A kk u/I nfo welcher A kku /18V : AC O/ EC O202 , AC O20 2 XL, AC O/ ECO 2 03 @ 0\mod_13 825 351 630 12_ 18.d oc x @ 1495@ 2 @ 1
