Ply 130™ply separator
www.flexco.com
—4—
!CAUTION
Only operate Aero® with machine positioned on
a level, rm surface.
NEVER use a machine which is defective or
operating abnormally. If machine appears to
be operating unusually, making strange noises,
or otherwise appears defective, stop using it
immediately and arrange for repairs.
Do not use machine if switch does not turn
it on or o. Any machine that cannot be
controlled with a switch is dangerous and must
be repaired.
Check for misalignment or binding of moving
parts, breakage of parts, and any other
condition that may aect machine operation. If
damaged, have machine serviced before using.
In order to maintain air ow, do not cover the
air inlets on top, at ends and on sides where air
ows through.
Maintain machine in clean condition. Remove
any oils, greases, or food product from outside
and inside machine.
Avoid dropping or severe handling of machine
at all times, including during movement in
transport case.
If the electrical supply cord is damaged, it must
be replaced by a special cord available from the
manufacturer or it’s service agent.
3. PERSONAL SAFETY
!WARNING
Use safety equipment. Always wear eye
protection, gloves, non-skid safety shoes, and
adhere to other safety standards of the facility
where operating the press.
Stay alert, watch what you are doing, and use
common sense when operating a machine. Do
not use machine while tired or under inuence
of drugs, alcohol, or medication. A moment of
inattention while operating machines may result
in serious personal injury.
Do not wear loose clothing or jewelry. Keep
your hair, clothing, and gloves away from
moving parts. Loose clothes, jewelry, or long
hair can be caught in moving parts.
When moving in transport case, ensure casters
are unlocked and case is latched securely.
Abide by all instructions and warning labels.
is equipment is not to be used by children
or persons with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge of the equipment.
4. USE AND CARE
!WARNING
Read and understand Aero® operations manual
before using machine.
Do not store solvents in Aero® transport case.
General Safety Rules
!CAUTION
e Aero has been optimized for process speed,
portability, and ease of use. A resulting aect
of the designed portability is that the structure
will deect as internal air pressure is increasing
during splice process. e length of press will
determine how much deection will occur at
any specic pressure. Beam extrusions were
designed with strength to return to their normal
state when pressure is relieved; deection will
not be permanent.
