Novell GROUPWISE 7 - SECURITY POLICIES Manuel utilisateur
Monitor
XIII
novdocx (en) 11 December 2007
963
XIII
Monitor
Chapter 58, “Understanding the Monitor Agent Consoles,” on page 965
Chapter 59, “Configuring the Monitor Agent,” on page 969
Chapter 60, “Configuring the Monitor Application,” on page 991
Chapter 61, “Using GroupWise Monitor,” on page 997
Chapter 62, “Comparing the Monitor Consoles,” on page 1021
Chapter 63, “Using Monitor Agent Switches,” on page 1023
964 GroupWise 7 Administration Guide
novdocx (en) 11 December 2007
Understanding the Monitor Agent Consoles
58
novdocx (en) 11 December 2007
965
58
Understanding the Monitor Agent
Consoles
The Monitor Agent offers three consoles:
Section 58.1, “Monitor Agent Server Console,” on page 965
Section 58.2, “Monitor Agent Web Console,” on page 965
Section 58.3, “Monitor Web Console,” on page 966
For a comparison of the capabilities of the three consoles, see Chapter 62, “Comparing the Monitor
Consoles,” on page 1021
For detailed instructions about installing and starting the GroupWise®Monitor Agent for the first
time, see “Installing GroupWise Monitor” in the GroupWise 7 Installation Guide.
58.1 Monitor Agent Server Console
The Monitor Agent server console is available for the Windows Monitor Agent but not for the Linux
Monitor Agent.
Figure 58-1 Monitor Agent Server Console
All agent configuration tasks can be performed at the Monitor Agent server console, but some
reports are not available.
58.2 Monitor Agent Web Console
The Monitor Agent Web console is platform-independent and can be viewed at the following URL:
http://web_server_address:8200
966 GroupWise 7 Administration Guide
novdocx (en) 11 December 2007
Figure 58-2 Monitor Agent Web Console
To create the Monitor Agent Web console display, your Web server communicates directly with the
Monitor Agent to obtain agent status information. You must be behind your firewall to use the
Monitor Agent Web console. Because the Linux Monitor Agent does not have a server console, you
use the Monitor Agent Web console in its place on Linux.
The Monitor Agent Web console is divided into the Agent Groups window on the left and the Agent
Status window on the right. Using the Agents Groups window, you can create and manage agent
groups the same as you can at the Monitor Agent server console.
Several Monitor features are available at the Monitor Agent Web console that are not available at the
Monitor Agent server console or the Monitor Web console. These are summarized in Chapter 62,
“Comparing the Monitor Consoles,” on page 1021.
58.3 Monitor Web Console
The Monitor Web console is also platform-independent and can be viewed at the following URLs:
NetWare or
Windows Web
Server:
http://web_server_address/gw/gwmonitor
Linux
Web Server:
http://web_server_address/gwmon/gwmonitor
Understanding the Monitor Agent Consoles 967
novdocx (en) 11 December 2007
Figure 58-3 Monitor Web Console
To create the Monitor Web console display, your Web server communicates with the Monitor
Application (a component of your Web server), which then communicates with the Monitor Agent
to obtain agent status information. This enables the Monitor Web console to be available outside
your firewall, while the Monitor Agent Web console can be used only inside your firewall.
The Monitor Web console is divided into the Agent Groups window on the left and the Agent Status
window on the right. Using the Agents Groups window, you can create and manage agent groups the
same as you can at the Monitor Agent server console.
The Monitor Web console does not include some features that are available at the Monitor Agent
server console and the Monitor Agent Web console. These are summarized in Chapter 62,
“Comparing the Monitor Consoles,” on page 1021.
968 GroupWise 7 Administration Guide
novdocx (en) 11 December 2007
Configuring the Monitor Agent
59
novdocx (en) 11 December 2007
969
59
Configuring the Monitor Agent
For detailed instructions about installing and starting the GroupWise®Monitor Agent for the first
time, see “Installing GroupWise Monitor” in the GroupWise 7 Installation Guide.
The default configuration of the GroupWise®Monitor Agent is adequate to begin monitoring
existing GroupWise agents (Post Office Agents, Message Transfer Agents, Internet Agents, and
WebAccess Agents). You can also customize the configuration to meet your specific monitoring
needs.
On Windows, you configure the Monitor Agent at the Monitor Agent server console on the
Windows server where the Monitor Agent is running.
Figure 59-1 Monitor Agent Server Console on Windows
On Linux, similar functionality is available in your Web browser at the Monitor Agent Web console:
http://localhost:8200.
Figure 59-2 Monitor Agent Web Console on Linux
970 GroupWise 7 Administration Guide
novdocx (en) 11 December 2007
The following topics help you customize the Monitor Agent for your specific needs:
Section 59.1, “Selecting Agents to Monitor,” on page 970
Section 59.2, “Creating and Managing Agent Groups,” on page 973
Section 59.3, “Configuring Monitoring Protocols,” on page 975
Section 59.4, “Configuring Polling of Monitored Agents,” on page 978
Section 59.5, “Configuring E-Mail Notification for Agent Problems,” on page 979
Section 59.6, “Configuring Audible Notification for Agent Problems,” on page 983
Section 59.7, “Configuring SNMP Trap Notification for Agent Problems,” on page 984
Section 59.8, “Configuring Authentication and Intruder Lockout for the Monitor Web
Console,” on page 985
Section 59.9, “Configuring Monitor Agent Log Settings,” on page 986
Section 59.10, “Configuring Proxy Service Support for the Monitor Web Console,” on
page 987
Section 59.11, “Monitoring Messenger Agents,” on page 988
Section 59.12, “Supporting the GroupWise High Availability Service on Linux,” on page 989
59.1 Selecting Agents to Monitor
By default, the Monitor Agent starts monitoring all GroupWise agents (Post Office Agents, Message
Transfer Agents, Internet Agents, and WebAccess Agents) in your GroupWise system, based on the
information from a domain database (wpdomain.db). You might not want to continue monitoring
all agents. And under certain circumstances, you might want to monitor agents that are not part of
your local GroupWise system.
Section 59.1.1, “Filtering the Agent List,” on page 970
Section 59.1.2, “Adding All Agents on a Server,” on page 971
Section 59.1.3, “Adding All Agents on a Subnet,” on page 971
Section 59.1.4, “Adding an Individual Agent,” on page 972
Section 59.1.5, “Removing Added Agents,” on page 972
59.1.1 Filtering the Agent List
You can configure the Monitor Agent to stop and start monitoring selected agents as needed.
At the Windows Monitor Agent server console:
1Click Configuration > Filter.
or
On Linux, at the Monitor Agent Web console, click Preferences > Filter.
Configuring the Monitor Agent 971
novdocx (en) 11 December 2007
The Filtered Out list displays all agents that are not currently being monitored.
2Select one or more agents in the Monitored list, then click Remove to move them to the Filtered
Out list.
3Click OK.
Agents in the Filtered Out list are not monitored and do not appear at the Monitor Agent server
console or at the Monitor Agent Web console. To start monitoring a filtered-out agent, move it back
to the Monitored list.
59.1.2 Adding All Agents on a Server
If you add a new server to your GroupWise system or want to monitor agents in a different
GroupWise system, you can easily start monitoring all the agents running on that server.
At the Windows Monitor Agent server console:
1Click Configuration > Add from Machine.
or
On Linux, at the Monitor Agent Web console, click Preferences > Add Agents.
2Type the IP address of the new server, then click OK.
All GroupWise agents on the new server are added to the list of monitored agents.
If the new server is part of your local GroupWise system, you can simply restart the Monitor Agent
and it picks up all new agents in your system.
59.1.3 Adding All Agents on a Subnet
If you add several new servers to your GroupWise system or want to monitor agents in a different
GroupWise system, you can easily start monitoring all the agents running on the same subnet.
At the Windows Monitor Agent server console:
1Click Configuration > Add from Network.
972 GroupWise 7 Administration Guide
novdocx (en) 11 December 2007
or
On Linux, at the Monitor Agent Web console, click Preferences > Add Agents.
2Type the subnet portion of the IP addresses of the new servers, then click OK.
All GroupWise agents on the subnet are added to the list of monitored agents.
If the new servers are part of your local GroupWise system, you can simply restart the Monitor
Agent and it picks up all new agents in your system.
59.1.4 Adding an Individual Agent
You can start monitoring an individual agent anywhere in your GroupWise system or another
GroupWise system.
At the Windows Monitor Agent server console:
1Click Configuration > Add Agent.
or
On Linux, at the Monitor Agent Web console, click Preferences > Add Agents.
2Type the IP address of the server where the agent runs.
3Type the port number the agent listens on.
4Click OK.
The agent is added to the list of monitored agents.
59.1.5 Removing Added Agents
To stop monitoring agents that you have manually added to the Monitor Agent’s configuration:
At the Windows Monitor Agent server console:
1Click Configuration > Remove Agents.
or
On Linux, at the Monitor Agent Web console, click Preferences > Remove Agents.
2Select the agents you want to remove, then click Remove.
3Click OK.
Autres manuels pour GROUPWISE 7 - SECURITY POLICIES
8
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Novell Logiciel
Novell
Novell GROUPWISE 8 - MONITOR Manuel utilisateur
Novell
Novell GROUPWISE 8 - DATABASES Manuel utilisateur
Novell
Novell IFOLDER 3.7 - SECURITY ADMINISTRATION Mode d’emploi
Novell
Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE... Manuel utilisateur
Novell
Novell CLIENT FOR LINUX 1.2 Manuel utilisateur
Novell
Novell PLATESPIN ORCHESTRATE 2.0.2 - VIRTUAL MACHINE MANAGEMENT GUIDE... Manuel de programmation
Novell
Novell IDENTITY MANAGER ENTITLEMENTS SERVICE DRIVER 3.6.1 -... Manuel utilisateur
Novell
Novell GROUPWISE 8 - DOMAINS Manuel utilisateur
Novell
Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 4.0 -... Manuel utilisateur
Novell
Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3... Manuel d'installation et d'exploitation
Novell
Novell LINUX ENTERPRISE DESKTOP 11 Manuel utilisateur
Novell
Novell LINUX ENTERPRISE DESKTOP 10 - GNOME... Manuel utilisateur
Novell
Novell CLIENT FOR LINUX 2.0 SP3 Mode d’emploi
Novell
Novell LINUX ENTERPRISE DESKTOP 11 Mode d’emploi
Novell
Novell LINUX ENTERPRISE 11 SP1 - LINUX AUDIT Manuel utilisateur
Novell
Novell SP2 - S Mode d’emploi
Novell
Novell SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010 Mode d’emploi
Novell
Novell LINUX ENTERPRISE DESKTOP 10 - KDE 21-06-2006 Manuel utilisateur
Novell
Novell LINUX ENTERPRISE DESKTOP 11 - OPENOFFICE Manuel utilisateur
Novell
Novell NETWARE 6-DOCUMENTATION Manuel utilisateur
Novell
Novell IFOLDER 3.6 - SECURITY ADMINISTRATION Manuel utilisateur
Novell
Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP1 - 9-21-2010 ADMINISTRATION GUIDE FOR OPEN ENTERPRISE SERVER 1 SP2... Mode d’emploi
Novell
Novell SUSE LINUX ENTERPRISE SERVER 10 STORAGE Manuel utilisateur
Novell
Novell BUSINESS CONTINUITY CLUSTERING 1.0 -... Manuel utilisateur
Manuels Logiciel populaires d'autres marques
Canon
Canon Vixia HF21 Manuel utilisateur
Canon
Canon ZR950 Manuel utilisateur
Samsung
Samsung Auto Backup Manuel utilisateur
Polycom
Polycom Vortex EF2201 Instructions d'installation et d'utilisation
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuel utilisateur
Lexmark
Lexmark Apps Manuel de service