Novell CLIENT FOR LINUX 2.0 SP1 - ADMINISTRATION Manuel utilisateur
Novell
www.novell.com
QUICK START
novdocx (en) 11 July 2008
Novell Client 2 SP1 for Linux Installation Quick Start
Client
TM
for Linux
2.0 SP1
08/19/2008
Installing the Novell Client for Linux
This document explains how to install the Novell Client for Linux software on a workstation.
For information on installing a preconfigured version of the Novell Client, see “Using Configuration
Files to Preconfigure the Novell Client” in the Novell Client for Linux Administration Guide.
“System Requirements” on page 1
“Using the YaST Control Center to Install the Novell Client” on page 2
“Using the Installation Script to Install the Novell Client” on page 3
“Upgrading From Version 2.0” on page 4
“Uninstalling the Novell Client for Linux” on page 5
SYSTEM REQUIREMENTS
The Novell Client 2.0 SP1 for Linux requires workstations running one of the following:
SUSE®Linux Enterprise Desktop 10 SP2 (32-bit or 64-bit)
openSUSE®10.3 (32-bit or 64-bit)
IMPORTANT: Do not install the 32-bit version of the Novell Client 2.0 SP1 for Linux onto a 64-bit
operating system. If you do so, you will lose the ability to log into the GUI credential provider. You
will see the error message, “Authentication Failed,” and will be unable to log in.
If you want to use the precompiled Novell Client for Linux Virtual File System provided with the
distribution, make sure one of the following packages is installed on your workstation before you
install the Novell Client for Linux. The package that is installed depends on your kernel type.
novfs-kmp-default
novfs-kmp-smp
novfs-kmp-bigsmp
novdocx (en) 11 July 2008
If you want to compile the Novell Client for Linux Virtual File System from sources provided with
the Novell Client for Linux, make sure the following packages are installed on your workstation
before you install the Novell Client for Linux:
gcc
kernel-source
make
For information on using YaST to install packages, see “Installing the Required Packages” in the
Novell Client for Linux Administration Guide.
USING THE YAST CONTROL CENTER TO INSTALL THE NOVELL CLIENT
Using YaST to install the Novell Client for Linux requires the following steps:
1. Installing the Novell Client for Linux Packages
2. Starting or Restarting the Novell Client for Linux
Installing the Novell Client for Linux Packages
1Make sure you have updated the workstation to the latest SUSE Linux Enterprise Desktop
10 SP2 patches.
2Launch the YaST Control Center.
GNOME: Click Computer > More Applications > System > YaST.
KDE: Click the menu button > System > YaST.
3If you are not logged in as root, type the root password, then click Continue.
4Click Software in the left column, then click Add-on Product in the right column.
5Select the appropriate Add-on Product source (such as CD, DVD, or Local Directory), then
click Next.
TIP: Select Local Directory if you downloaded the file from Novell Downloads (http://
download.novell.com).
6Follow the on-screen instructions for the installation source you specified in Step 5.
For example, you might be prompted to insert the Novell Client for Linux CD, or to specify
which local directory contains a copy of the downloaded Novell Client for Linux files.
7Select Yes, I Agree to the License Agreement, then click Next.
8Select Patterns from the Filter drop-down list.
9Select Novell Client for Linux in the Additional Software category.
10 The Novell Client for Linux check box should already be selected. If it is not, select it to
automatically select all packages for installation.
novdocx (en) 11 July 2008
11 Click Accept to install all of the Novell Client for Linux packages.
12 Start the Novell Client for Linux.
See “Starting or Restarting the Novell Client for Linux” on page 3.
For more information, see “Using the Novell Client Tray Application” in the Novell Client for Linux
User Guide.
Starting or Restarting the Novell Client for Linux
Use any of the following methods to start or restart the Novell Client for Linux:
Restart the Linux Workstation: This is the best way to ensure that the Novell Client for
Linux is completely restarted.
Manually Start the Novell Client: Open a terminal window and log in as root. From the
/opt directory, enter one of the following commands:
New Installations: /opt/novell/ncl/bin/ncl_control start
This command loads all the Novell Client for Linux daemon modules.
Updates: /opt/novell/ncl/bin/ncl_control restart
This command stops and then reloads all the Novell Client for Linux daemon modules.
If either of these commands displays any errors, restart the Linux* machine.
In addition, /opt/novell/ncl/bin/ncl_control status shows whether the Novell Client
for Linux drivers are loaded properly, and /opt/novell/ncl/bin/ncl_control stop stops
all Novell Client for Linux daemon modules.
USING THE INSTALLATION SCRIPT TO INSTALL THE NOVELL CLIENT
NOTE: If you are installing the Novell Client 2.0 SP1 for openSUSE 10.3 using the installation
script, you must verify that the kdelib3 package and the novfs-kmp-xpackage are installed
before you proceed. In the novfs-kmp-xpackage name, xmatches the installed kernel (for
example novfs-kmp-default, novfs-kmp-smp, or novfs-kmp-bigsmp). If you use the YaST
installation method, the packages are added automatically through YaST dependency resolution.
An installation script called ncl_install is provided in the Novell Client for Linux .tar.gz file
that you downloaded from Novell Downloads (http://download.novell.com). This script can be used
to install, update, verify installation, display information, and uninstall the Novell Client directly from
a command prompt using documented RPM commands. This same script is copied to the /opt/
novell/ncl/bin directory during the installation of the Client for later use in verifying or
uninstalling the Client.
novdocx (en) 11 July 2008
Run these commands from the directory where you unarchived the Client download file or from
/opt/novell/ncl/bin after the initial installation. You must be logged in as root to run these
commands.
Table 1 ncl_install Commands
UPGRADING FROM VERSION 2.0
NOTE: Upgrading from an earlier version of the Novell Client for Linux is not supported. You must
upgrade your workstation to Novell Client 2.0 before upgrading to 2.0 SP1.
To use YaST to upgrade from the Novell Client 2.0 for Linux to 2.0 SP1, follow these steps. You
can also use the ncl_install script to upgrade to 2.0 SP1 (see “Using the Installation Script to
Install the Novell Client” on page 3 for more information).
1Launch the YaST Control Center.
GNOME: Click Computer > More Applications > System > YaST.
KDE: Click the menu button > System > YaST.
2Click Software > Installation Source.
3Select the Novell Client 2.0 for Linux source, click Delete, then click Yes.
4Click Finish.
Command Description
./ncl_install install Installs the Novell Client for Linux.
./ncl_install install force Forces the installation of all Novell Client
for Linux packages.
./ncl_install upgrade Upgrades the Novell Client for Linux.
./ncl_install upgrade force Forces the upgrade of all Novell Client for
Linux packages.
./ncl_install uninstall Uninstalls all Novell Client for Linux
packages.
./ncl_install verify Verifies the installation of all installed
Novell Client for Linux packages.
./ncl_install information Displays summary information for all
installed Novell Client for Linux packages.
./ncl_install files Displays a list of all files contained in the
Novell Client for Linux packages.
novdocx (en) 11 July 2008
5In the YaST Control Center, click Software > Add-on Product.
6Select your Novell Client 2.0 SP1 for Linux installation source (such as CD or Local
Directory), then click Next.
7Follow the on-screen instructions for the installation source you specified in Step 6.
For example, you might be prompted to insert the Novell Client for Linux CD, or to specify
which local directory contains a copy of the downloaded Novell Client for Linux files.
8Select Yes, I Agree to the License Agreement, then click Next.
If you see Dependency Conflict messages informing you that the Novell Client cannot be
installed because of missing NICI and NMASTM dependencies:
8a Select Install novell-nmasclient although it would change the architecture, then click
OK– Try Again.
8b Select Install nici although it would change the architecture, then click OK– Try Again.
9Select Patterns from the Filter drop-down list.
10 Make sure Novell Client for Linux is selected in the Pattern list. It should already have a
check mark in the check box.
You should see all of the Novell Client for Linux packages in the package summary list. All
packages should be selected for installation except for novell-xtier-xplat, which does
not have a check mark.
11 Select novell-xtier-xplat for installation.
12 Right-click the novell-client package in the package summary list, then select All in This
List > Update if newer version available.
The icons to the left of the packages in the package summary list change from a check mark
to the update symbol, except for novell-xtier-xplat.
13 Click Accept to install all of the selected packages.
You will see all the packages being installed on the Package Installation dialog box, followed
by the SuSEconfig dialog box.
14 Start the Novell Client for Linux.
See “Starting or Restarting the Novell Client for Linux” on page 3.
UNINSTALLING THE NOVELL CLIENT FOR LINUX
Use either of the following methods to uninstall the Novell Client for Linux:
“Using the YaST Control Center to Uninstall” on page 6
“Using the Installation Script to Uninstall” on page 6
novdocx (en) 11 July 2008
Using the YaST Control Center to Uninstall
1Launch the YaST Control Center.
GNOME: Click Computer > More Applications > System > YaST.
KDE: Click the menu button > System > YaST.
2Click Software in the left column, then click Software Management in the right column.
3Select Patterns from the Filter drop-down list.
4Select Novell Client for Linux from the Additional Software category to see the list of installed
packages.
5Click the check box to the left of Novell Client for Linux until a trash can appears.
This automatically selects all of the packages that need to be deleted by changing their icons
to a trash can.
If the Novell Client 2.0 SP1 for Linux was installed as an upgrade to the Novell Client 2.0 for
Linux, the novell-xtier-xplat package icon is not automatically changed to the trash
can.
6Right-click the novell-client package, select All in This List, then click Delete.
7Click Accept to delete all of the selected packages.
YaST might display the following dependency conflict:
product:Client_for_Linux-2.0.0.i686 has missing dependencies
If YaST displays this dependency conflict, select delete Client_for_Linux, then click OK - Try
Again.
YaST displays the progress of the uninstall.
Using the Installation Script to Uninstall
To uninstall the Novell Client for Linux using the installation script, enter./ncl_install
uninstall in a terminal window. You can run this command from the directory where you
unarchived the Client download file or from the /opt/novell/ncl/bin directory. You must be
logged in as root to run this command.
Legal Notice
Copyright © 2007 Novell, Inc. All rights reserved. No part of this publication may be reproduced, photocopied, stored on a retrieval system, or
transmitted without the express written consent of the publisher. For a list of Novell trademarks, see the Novell Trademark and Service Mark list
(http://www.novell.com/company/legal/trademarks/tmlist.html). All third-party trademarks are the property of their respective owners. A
trademark symbol (®, TM, etc.) denotes a Novell trademark; an asterisk (*) denotes a third-party trademark.
Autres manuels pour CLIENT FOR LINUX 2.0 SP1 - ADMINISTRATION
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Novell Logiciel
Novell
Novell SENTINEL RAPID DEPLOYMENT 6.1 - 12-2009 Manuel utilisateur
Novell
Novell SENTINEL 6.1 SP2 - INSTALLATION GUIDE... Manuel utilisateur
Novell
Novell IDENTITY MANAGER 3.6.1 - WORKORDER DRIVER IMPLEMENTATION GUIDE... Manuel utilisateur
Novell
Novell LINUX ENTERPRISE DESKTOP 10 SP2 Manuel utilisateur
Novell
Novell LOGIN SCRIPTS - 08-2008 Manuel utilisateur
Novell
Novell LINUX ENTERPRISE DESKTOP 10 SP2 - GNOME... Manuel utilisateur
Novell
Novell SLRS 8 - Manuel
Novell
Novell APPARMOR - AND Manuel
Novell
Novell SUSE LINUX ENTERPRISE SERVER 10 STORAGE Manuel utilisateur
Novell
Novell EDIRECTORY 8.8 - GUIDE 09-2006 Manuel utilisateur
Novell
Novell FILE SYSTEM FACTORY 1.2.1 - ADMINISTRATION Manuel utilisateur
Novell
Novell SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010 Manuel utilisateur
Novell
Novell IFOLDER 3.8 - DEPLOYMENT Guide de référence rapide
Novell
Novell SP2 - S Mode d’emploi
Novell
Novell ACCESS MANAGER 3.1 SP1 - ADMINISTRATION Manuel utilisateur
Novell
Novell OES 11 SP2 Manuel utilisateur
Novell
Novell GROUPWISE 8 - TROUBLESHOOTING 3 Manuel utilisateur
Novell
Novell SENTINEL LOG MANAGER 1.0.0.4 - S Mode d’emploi
Novell
Novell GROUPWISE 7 WEBACCESS Manuel utilisateur
Novell
Novell LINUX ENTERPRISE DESKTOP 10 SP1 - START UP GUIDE... Manuel utilisateur
Novell
Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - ... Manuel utilisateur
Novell
Novell LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR... Mode d’emploi
Novell
Novell PRODUCT NAME 10.3 - DEPLOYING ZENWORKS ON CITRIX SERVER BEST PRACTICES GUIDE... Manuel utilisateur
Novell
Novell ZENWORKS PATCH MANAGEMENT 6.4 - S Manuel utilisateur
Manuels Logiciel populaires d'autres marques
Canon
Canon Vixia HF21 Manuel utilisateur
Canon
Canon ZR950 Manuel utilisateur
Samsung
Samsung Auto Backup Manuel utilisateur
Polycom
Polycom Vortex EF2201 Instructions d'installation et d'utilisation
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuel utilisateur
Lexmark
Lexmark Apps Manuel de service