Novel XSZ-107T Guide de démarrage rapide

1 | P a g e

Biological Microscope

Model XSZ-107T

With an Epi-Fluorescence (YX- ) attachment

USER AND OPERATIONAL

MANUAL

This manual is for the biological microscope XSZ-107T. To ensure the safety and optimum performance of this

unit, please ensure a thorough familiarization with this manual so as to become comfortable with the use of this

unit.

2 | P a g e

Novel XSZ-107T with YX- Epi- Fluorescence Attachment

Contents

1. Application ................................................................................................................................................................ 3

2. Safety Note ............................................................................................................................................................ 3

3. Maintenance and care .......................................................................................................................................... 4

4. Components of the microscope ................................................................................................................................ 5

5. Assem ly ................................................................................................................................................................... 6

6. Assem ly Procedure ......................................................................................................................................... 7

6.1 Installing the epi-florescence unit ................................................................................................................. 7

6.2 Installing the inocular head ............................................................................................................................... 7

6.3 Installing the Eyepieces ................................................................................................................................. 8

6.4 Installing the o jectives ................................................................................................................................ 8

7. Connecting the power cords ................................................................................................................................. 9

8. Adjustment Set Diagram ..................................................................................................................................... 10

.................................................................................................................................................................................... 11

9. Adjustment and Operation for rightfield microscopy ...................................................................................... 12

9.1 Brightness Adjustment ................................................................................................................................ 12

10. Focusing on the specimen .............................................................................................................................. 13

10.1 Focus on the specimen ............................................................................................................................... 13

10.2 Condenser adjustment ................................................................................................................................ 13

10.4 Adjusting the interpupillary distance .......................................................................................................... 14

10.5 Adjusting the dioptre .................................................................................................................................. 14

10.6 Adjusting the tension adjustment collar ..................................................................................................... 14

11. Using the Epi-Florescence attachment for specimen o servation ................................................................. 14

11.1 Preparation ................................................................................................................................................. 15

13. Technical Specifications ...................................................................................................................................... 16

13.1 Main specifications of the microscope XSZ-107T ....................................................................................... 16

13.2 Main specifications of the epi-florescence attachment YX-2 ..................................................................... 16

12.1 Fluorescent Filter Com inations ................................................................................................................. 17

3 | P a g e

1. Application

The XSZ-107 series microscope is a multi-purpose io-microscope that has een specifically designed for

clinical and chemical examination. The application and use of this series of microscopes is very diverse and

extends to professional research, teaching demonstration, use in medical and health esta lishments,

la oratories, technology, research and tertiary education facility. Its accessories make the instrument

capa le of accomplishing a very diverse and wide range of practical use. The XSZ-107 can e adapted in

many ways including phase contrast, florescence, photography, camera depiction, television and computer

ased image processing. The XSZ-107 can also e used for routine work in the fields of iology,

acteriology, histology, cytology, haematology and pharmacology easily (to name a few).

The microscope unit is used in conjunction with the epi-fluorescent attachment which has een designed

for use with and including our iological microscopes such as the Novel N-400M, Novel N320M and the

Novel XSZ-107CCD.

. Safety Note

a. Carefully open the ox, avoid the accessories dropping to the ground and eing damaged.

The epi-fluorescent attachment is a precision instrument.

. Please ensure that the entire unit is kept out of direct sunlight, high temperatures, humid or

dusty environments.

c. Make certain that the power cords are installed correctly and that all other components are

connected firmly.

d. Do not open any of the lamp housings while they are turned on or for at least 10 minutes

after they have een turned off. These parts are extremely hot and can cause urns if

touched.

e. Always e sure to ground (earth) the equipment.

f. Verify that the voltage and the frequency of the AC mains outlet match the setting of the

voltage switch and the frequency switch on the rear of the power supply units.

g. Always use the power cord provided y NOVEL and make sure that the main switch is

moved to “O” (OFF) efore connecting the power cord plug to the wall outlet.

h. To prevent any hazard, always turn the main switch on the power supply unit to “O” (OFF),

unplug the power cord plug from the mains outlet efore replacing any ul or the fuse, and

wait for at least 10 minutes efore replacing the ul .

i. To prevent o struction of the air flow, it is important to make sure to leave enough space

around and a ove the lamp housing of the microscope as well as epi-florescence

attachment.

4 | P a g e

The following sym ols are found on the system. Study the meaning of the sym ols and always use

the equipment in the safest possi le manner.

Sym ol

Explanation

Indicates that the surface ecomes hot, and should not e touched with are hands。

Indicates that the high voltage (upper 1KV)

inside, improper

handing could result in an

electric shock to the use.

Before use, carefully read the user manual .Improper handing could r

esult in personal

injury to the user and/or damage to the equipment.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

● This manual is written for the XSZ-107T with an epi-fluorescent attachment YX-2 and efore

equipping it with any other ordinary microscope, e sure to learn how to use the microscope.

3. Maintenance and care

3.1 All the lenses have een adjusted properly, please do not dismount any lenses y oneself as this

will render any warranties / guarantees void.

3.2 The nosepiece and coarse / fine focus parts are very delicate and should under no

circumstances e dismantled y anyone who has not received correct training on how to repair

any faults that may occur.

3.3 Keep the units clean at all times. Do not place any hazardous chemicals near the units as the

lenses will get damaged and shall not e replaced under warranty.

3.4 If, under certain circumstances, certain contaminants end up on the lenses (i.e fingerprints, oil

smudges) one can clean these off with a soft cloth, tissue paper or gauze which has een slightly

immersed in pure alcohol or ether. Note that the alcohol or ether is extremely flammable;

please take extra precaution when using this method by keeping the cleaning solution and

cloth or material away from potential sources of electrical spark or fire.

3.5 Do not attempt to use any organic (live) solvents to clean the microscope or epi-florescence

unit and other glass components. To clean the microscope and exterior of the epi-florescence

unit, use of a lint-free, soft cloth slightly moistened with a diluted neutral detergent.

3.6 While in use, if at any moment, some liquid of any form splashes onto the microscope,

immediately switch the unit off and remove any liquid that may still e visi le.

3.7 Do not dis-assem le any parts of the microscope or the epi-florescence unit as this will

compromise the function or reduce the overall performance of the unit.

3.8

Always place the unit in a cool, dry level surfaced location. When not in use, keep the unit

covered with the provided dust cover and make sure that the microscope as well as attached

epi-florescence unit has sufficiently cooled efore storing away

Safety Symbols

5 | P a g e

4. Components of the microscope

6 | P a g e

5. Assembly

Assembly Diagram

The Following figure shows the completed installation of the components: The corresponding figures show the

assem ly steps.

•Before installation, ensure the unit is clean as well as every component, do not store unpacked

units in a room which has high temperatures, high humidity or a dusty environment.

7 | P a g e

6. Assembly Procedure

6.1Installing the epi-florescence unit

Place the epi-florescence unit on top of the microscope ody and tighten

the holding screw firmly to hold the unit in place

6.2

Installing the binocular head

Insert the inocular viewing head into the epi-florescence

unit and then mount it onto the microscope and ensure it is in

the correct position and olt it down to ensure no movement

8 | P a g e

6.3 Installing the Eyepieces

Insert the eyepiece into the eyepiece tu e until they are level with the

eyepiece tu es as shown

6. Installing the objectives

•Adjust the coarse focus kno until the support device of the

mechanical stage reaches its lowest limit position.

•Screw the lowest magnification o jective into the nosepiece from

the left or the right side and then revolve the nosepiece clockwise

and place one o jective per open socket until all the o jectives are

installed.

Clean the objectives regularly as the lenses are susceptible to dust.

When operating the microscope, always use the 10x (yellow band)

objective to find the specimen first, then rotate the nosepiece to

magnify the specimen.

When rotating the nosepiece, always make sure one hears the

“click” sound to know the objective is in place and ready for

observation.

9 | P a g e

Connecting the power cords

•The ca les and power cords are vulnera le when ent or twisted;

never su ject the power cords to excessive force.

•Set the main switches to the off “0” position efore

connecting any of the power cords.

•Insert the power cord jack into the power of the microscope unit

Safely.

7.1 Charging of Battery and switching on

• The “I“ position power is ON. You can use the unit plugged in, and

the attery will charge while in use.

• The “II” position indicator renders the power as OFF. You cannot

use incident illumination as the LED will e off. If plugged in

the internal attery unit will automatically charge.

• “0” power is OFF. There will e no charging of the attery and no

illumination of the LED even if the unit is plugged in to the AC

mains power supply.

Once charging of the internal attery has commenced, a red power

indicator shall e o served. If the internal attery has reached its full

charge capacity, the red light will extinguish and a green light will

appear. Once in use, if one disconnects from the main AC power – the

internal attery will hold enough current to illuminate the LED for up

to 8 hours without requiring a re-charge.

If the battery is completely drained, the microscope can be

used, plugged into the wall outlet. It is used on the same

application as a laptop.

•Red Light - When charging the microscope, if the LED

power indicator light is red, the battery is not fully

charged.

•Green Light - When the LED power indicator light green,

the battery is fully charged.

•

If the unit has been stored for more than a week without any

AC power, it is advisable to charge the unit up over a

minimum of 18 hours before normal operation.

Insert the power cord into the epi- fluorescence power module safely

- Or -

Insert the power cord into the attery ackup epi-florescence power

module safely. If the attery ackup epi-florescence power module has

een stored for more than a week without any AC power, it is advisa le to

charge the unit up over a minimum of 18 hours efore normal operation.

10 | P a g e

Adjustment Set Diagram

Table des matières

Manuels Microscope populaires d'autres marques

Thermo Scientific

Thermo Scientific Nicolet iN10 Mode d’emploi

National

National DC3-163 Manuel utilisateur

KERN Optics

KERN Optics OPE-1 Manuel utilisateur

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuel utilisateur

Prior

Prior Lux POL Manuel utilisateur

Opitec

Opitec Smartscoop 115615 Manuel utilisateur

KERN

KERN OPO-1 Manuel utilisateur

Topcon

Topcon SP-1P Manuel utilisateur

Motic

Motic PA43 Manuel utilisateur

Leica

Leica DVM5000 Guide de l'utilisateur

MshOt

MshOt MZ62 Manuel utilisateur

KERN Optics

KERN Optics OZR-5 Manuel utilisateur

VWR

VWR VisiScope 384 Series Manuel utilisateur

Nikon

Nikon ECLIPSE E200 POL Manuel utilisateur

Leica

Leica DI C800 Manuel

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

Olympus

Olympus SZ61 Manuel utilisateur

novel XSZ-107T Guide de démarrage rapide

Manuels Microscope populaires d'autres marques