Nova 55264 Manuel utilisateur
1
133-01-2303
Neptune Max Stand
Accessory
OPERATION MANUAL
SKU 55264
For safety reasons, please read
carefully read amd understand
these instructions.
The NOVA Neptune Max Stand is
designed to fit and be used with
the Neptune, Neptune Max, DVR
XP and 1624-44 woodlathes.
Use of the Neptune Max Stand on
other lathes could cause a
malfunction and risk of serious
injury, if you are unsure of the use
or the application of this
accessory, contact the technical
support department of Teknatool
International or your reseller.
Further information can also be
found in your lathe manual.
Parts List:
Part SKU
Description
Qty
1 FW12 Flat Washer M12 ZP 8
2 SW12 Spring Washer M12 ZP 8
3 C12035 M12x35mm Cap Screw ZP 8
4 C06016 M6x16mm Cap Screw ZP 4
5 FW06 Flat Washer M6 ZP 16
6 SW06 Spring Washer M6 ZP 16
7 BHC06012 M6x12mm Button Head Cap Screw 8
8 5519016 Stand Cross Plate 2
9 5519015 Stand Legs 4
10 5519018 Stand Cover 2
11 5519017 Tool Tray 2
12 24161 Foot Assembly 4
Specifications:
Metric Imperial
Overall Size 1292mm (L) x 490mm
(w) x 818mm(H)
50.9” (L) x 19.3” (w) x
32.2” (H)
Net Weight 25.5 Kg ± 0.5 Kg 56.2 Lb ± 1.1 lb
For all worldwide Inquiries, Repairs or Services
(issues must be in writing)
Contact us at:
https://www.teknatool.com/support/
2
133-01-2303
Assembly Instructions:
Step 1:
Lay the bed face down on a flat clean surface. It is recommended that
a piece of cardboard is placed between the bed and the floor to
protect the surface of the bed.
Step 2:
Align one of the legs (Part 9) with the mounting holes on the bed.
Fasten in place using Parts 1, 2 & 3 respectively.
DON’T FULLY TIGHTEN AT THIS STAGE.
Repeat this process for the remaining three legs.
Step 3:
Align the cross plate (Part 8) with the holes on the inside of the legs.
Fasten in place using Parts 5, 6 & 4 respectively.
DON’T OVER TIGHTEN AT THIS STAGE.
Step 4:
Align the tool tray (Part 11) with the holes on the outside of the legs.
Fasten in place using Parts 5, 6 & 7 respectively.
DON’T OVER TIGHTEN AT THIS STAGE.
Step 5:
Fully tighten the M12 cap screws (Part 3) assembled in Step 2,
followed by the M6 cap screws (Part 4) and the M6 button head cap
screws (Part 7) assembled in Step 3 and Step 4 respectively.
Step 6:
Attach the feet (Part 12) to the base of the legs.
Step 7:
Flip the stand over onto its feet so that it is right side up.
WARNING: Due to the weight of the stand, it is recommended that a
second person helps lift the stand.
Step 8:
Align the cover plate (Part 10) with the holes on the side of the stand.
Fasten in place using Parts 5, 6 & 7 respectively.
Step 9:
To balance the stand, adjust the feet accordingly by
screwing/unscrewing the feet from the base of the stand. Secure in
place by fastening the nut tightly against the base of the leg.
3
133-01-2303
Teknatool Warranty
NOVA Limited Warranty
4499 126th St North | Clearwater Florida 33762
teknatool.com | 727.954.3433
Our policy is one of continuous improvement. We therefore reserve the right to change specification/design without notice. This warranty
is Teknatool International Ltd and Teknatool USA Inc. sole warranty whether written or verbal, whether expressed or implied by law, trade,
custom, or otherwise, whether of merchantability, fitness for purpose, or otherwise, except for remedies available to customers under
the Consumer Guarantees Act or other legislation. For full warranty details and instructions on how to file a claim, please go to
teknatool.com
Autres manuels Nova Support et étagère
Nova
Nova FPA-0-2124-27 Manuel utilisateur
Nova
Nova CH-2000 Feuille d'instructions
Nova
Nova SMA-1-0203-NK series Manuel utilisateur
Nova
Nova 50090190 Manuel utilisateur
Nova
Nova CH-1102 Guide de l'administrateur
Nova
Nova VWK1 Manuel utilisateur
Nova
Nova Trolley Manuel
Nova
Nova FPA-0-1821 series Manuel utilisateur
Nova
Nova Trolley E-Class Manuel
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
