Notifier ID50 SERIES Manuel utilisateur

ID50/60operating

manual

997-264, Issue 4 September 2002

ID50 Series Panel - Operating Manual

Contents

i 997-264, Issue 4

September 2002

Contents

1 Introduction 1

1.1 Associated Documents 1

1.2 The ID50 / ID60 Series Panel 1

1.2.1 Device Type Abbreviations 2

1.3 Cleaning 2

2 Panel Controls and Indicators 3

2.1 Controls 3

2.2 Indicators

3 Automatic Alarms - What to do 5

3.1 Fire 5

3.1.1 Fire in Delayed Mode 7

3.2 Fault 8

3.2.1 Power Fail 9

3.3 Plant Alarm 10

4 Operator Actions at Panel 11

.1 Introduction 11

4.1.1 Li uid Crystal Display 11

4.1.2 Internal Buzzer 12

4.1.3 Access Codes 12

4.1.4 Keyswitch 13

.2 RESET Pushbutton 13

.3 MUTE BUZZER Pushbutton 13

. SILENCE/RESOUND Pushbutton 1

.5 END DELAYS/EVACUATE Pushbutton 15

.6 Numeric Keys 16

4.6.1 Cancellation/Termination Button 16

4.6.2 Level 2 Options Menu Button 16

.7 Level 2 Option Menus 17

.8 TEST - User Option 18

4.8.1 LEDs - User Option 19

4.8.2 LCD - User Option 19

4.8.3 Zones - User Option 20

4.8.4 Auto High Test - User Option 22

4.8.5 Outputs - User Option 23

4.8.6 Buzzer - User Option 24

4.8.7 Keyboard - User Option 24

ID50 Series Panel - Operating Manual

Contents

ii997-264, Issue 4

September 2002

.9 DISABLE / ENABLE - User Option 25

4.9.1 Zones - User Option 26

4.9.2 Outputs - User Option 28

4.9.3 Day Mode - User Option 29

4.9.4 Delays - User Option 30

.10 CLOCK - User Option 31

4.10.1 Time - User Option 32

4.10.2 Date - User Option 33

.11 VIEW MODE - User Option 3

4.11.1 Log - User Option 35

4.11.2 Devices - User Option 36

4.11.3 Faults - User Option 37

4.11.4 Input Events - User Option 38

4.11.5 Disabled - User Option 39

4.11.6 Alarm Count - User Option 39

4.11.7 Voltages - User Option 40

4.11.8 Version - User Option 41

.12 Commissioning 1

Appendix 1 - Log Book A1-1

Appendix 2 - Maintenance A2-1

Appendix 3 - ID60 Single Loop Panel

Differences A3-1

ID50 Series Panel - Operating Manual

Contents

iii 997-264, Issue 4

September 2002

ID50 Series Panel

ID50 Series Panel - Operating Manual

Introduction

1 997-264, Issue 4

September 2002

1 Introduction

T is manual contains operating instructions for t e ID50

and ID60 Series Fire Detection Panels. Differences

between t e ID50 and ID60 panels are given in

Appendix3.

Users of t is manual are assumed to be working wit a

panel t at as already been installed and configured

appropriately for t e area under its supervision.

1.1 Associated Documents

T is manual does not describe t e installation or

configuration procedures of t e panel. For information

on t ese topics, refer to t e ID50 Series

Panel-Installation, Commissioning and

Configuration Manual ( ef.997-263-XXX).

1.2 The ID50 / ID60 Series Panel

T e panel, as supplied by NOTIFIER, is a 1-loop, 16-zone

Analogue Addressable Panel. T e single loop as t e

capacity for up to 99 analogue sensors plus up to 99

modules and, in some installations, panels may also be

connected to repeaters using t e RS485 Communications

Link.

All t e control and operation functions described in t is

manual can be carried out using t e pus buttons on t e

front of t e panel.

A keyswitc is provided w ic , w en set to t e rig t, as

t e same effect as entering an access2 passcode. Set it

to t e centre and repeatedly press t e 

 button until

t e Status:NORMAL message is displayed to de-select

access level2.

ID50 Series Panel - Operating Manual

Introduction

2997-234, Issue 4

September 2002

1.2.1 Device Type Abbreviations

T roug out t is manual t e panel may refer to devices

by an abbreviated name. T e following table lists t e

device type abbreviation and its description.

Abbreviation Type Description

AUX Plant Warning Input

AVR* Advanced VIEW Reference*

AVS* Advanced VIEW Sensor*

CTL Monitored (Relay Type) Output

ESM Extinguis ant System

ESO Monitored Extinguis ing System Output

EST Extinguis ant Monitor System Trigger

ION Ionisation Smoke Detector

IRL Immediate Release Input

MCP Manual Call Point

MLT Advanced Multi Sensor

MNS Monitor module (no s ort-circuit)

MON Fire Alarm Monitor Input

MRL Manual Release Input

OPT Optical/P oto-electric Smoke Detector

RLY Unmonitored (Relay Type) or O/C Outputs

SDR Monitored (Sounder Type) Output

TMP Temperature Detector

ZMX Conventional Detector Input

Note: Devices marked * are supported by t e ID60

Panel only. T e Device marked  is also

available as DKM - not used in t is application

(provided to be compatible wit VdS

requirements).

1.3 Cleaning

T e panel case may be cleaned periodically by wiping

wit a soft, damp lint-free clot .

Do not use solvents.

ID50 Series Panel - Operating Manual

Panel Controls & Indicators

3 997-264, Issue 4

September 2002

2 Panel Controls and Indicators

T e panels controls and indicators are used to operate

t e overall system and display t e panel status. T e panel

as four function pus buttons, twelve numeric/cursor

keys and t irty-two zonal LED indicators, two FIRE

indicators and fourteen system status LED indicators.

An access level2 keyswitc is provided to enable t e

operation of panel controls and access to user menus

wit out entering a passcode via t e numeric keypad.

2.1 Controls

T e pus buttons are listed below, toget er wit

references to t e relevant sections of t e manual:

Function Pushbuttons

RESET - (Section4.2).

MUTE BUZZER - (Section4.3).

SILENCE/RESOUND - (Section4.4).

END DELAYS/EVACUATE - (Section4.5).

Numeric/Cursor Keys

Numeric/Cursor keys - (Section4.6).

Keyswitch

Turn t e keyswitc to enable level2 access. T e

keyswitc provides an alternative to entering t e level2

access code via t e numeric keys. See Section4.1.3

and Section4.1.4.

ID50 Series Panel - Operating Manual

Panel Controls & Indicators

4997-264, Issue 4

September 2002

2.2 Indicators

T e panel status indicators comprise t ree groups:

a. Zone Status LED indicators.

b. Panel/System LED indicators.

c. Visible/Audible indicators.

Zone St tus LED Indic tors

ZONE FIRE - t ese LEDs indicate affected zone(s).

ZONE FAULT/DISABLE/TEST - t ese LEDs indicate

affected zone(s).

P nel/System LED Indic tors

FIRE - t ese LEDs indicate a fire condition.

Ot er System Status LEDs:

DISABLEMENT indicates t e presence of a

manually-configured

disablement.

TEST indicates a test is in

progress.

BUZZER MUTED indicates t e internal buzzer

as been silenced.

PLANT ALARM indicates a fault or warning

from a plant-monitoring

device.

DELAYED MODE indicates delays are active.

RELAY DISABLE indicates relay outputs ave

been disabled.

POWER indicates status of power

supply.

FAULT indicates a fault as been

detected by t e panel.

POWER SUPPLY FAULT

indicates an unsatisfactory

power supply to t e panel.

EARTH FAULT indicates an eart fault as

occurred.

SYSTEM FAULT indicates t e CPU as reset

or a system fault as

occurred.

SOUNDER FAULT indicates a fault wit t e

sounder circuit.

SOUNDERS DISABLED

indicates sounder outputs

ave been disabled.

SOUNDERS SILENCED

indicates sounder outputs

ave been silenced.

Visible/Audible Indic tors

Liquid Crystal Display (LCD) - (Section4.1.1).

Internal Buzzer - (Section4.1.2).

Autres manuels pour ID50 SERIES

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Notifier Panneau de contrôle

Notifier

Notifier SFP-5UD(C)/E Manuel utilisateur

Notifier

Notifier AFP-200 Manuel utilisateur

Notifier

Notifier NFS2-640/E Manuel utilisateur

Notifier

Notifier AM2020 Manuel utilisateur

Notifier

Notifier NFS-320 Manuel utilisateur

Notifier

Notifier AM-6000 Manuel utilisateur

Notifier

Notifier AFP-3030 Manuel utilisateur

Notifier

Notifier AFP-300 Manuel utilisateur

Notifier

Notifier AFP-300 Manuel du propriétaire

Notifier

Notifier NFS-320 Manuel utilisateur

Notifier

Notifier NFS2-3030 Manuel utilisateur

Notifier

Notifier NFS2-3030/E Manuel utilisateur

Notifier

Notifier AFP-3030 Manuel utilisateur

Notifier

Notifier AFP-300 Manuel utilisateur

Notifier

Notifier AM2020/AFP1010 Manuel utilisateur

Notifier

Notifier NFS2-3030 Manuel utilisateur

Notifier

Notifier FireWarden-100-2 Manuel utilisateur

Notifier

Notifier AFP-300 Manuel utilisateur

Notifier

Notifier AFP-400 Manuel utilisateur

Notifier

Notifier NFS-3030/E Manuel utilisateur

Notifier

Notifier NFS2-640/E Manuel utilisateur

Notifier

Notifier NFS-640 Manuel utilisateur

Notifier

Notifier AFP-3030 Manuel utilisateur

Notifier

Notifier AFC-600 Manuel utilisateur

Manuels Panneau de contrôle populaires d'autres marques

RDZ

RDZ PC-HRX Manuel utilisateur

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuel technique

Efka

Efka Variocontrol V810 Manuel utilisateur

Cebora

Cebora 208-10 Manuel utilisateur

AMX

AMX AutoPatch CP-15 Manuel utilisateur

Satel

Satel CA-6 KLED-S Manuel utilisateur

Evolution

Evolution IQ plus 800 Manuel utilisateur

Fagor

Fagor 8040 TCO CNC Manuel utilisateur

Trane

Trane ComfortLink II XL950 Control Manuel utilisateur

AKO

AKO PROCool AKO-17635-2 Manuel utilisateur

ABB

ABB 6136/30M-101 Manuel utilisateur

Telikou

Telikou BK-603 Belt Pack Manuel utilisateur

Mapei

Mapei Mapeheat Thermo Touch Manuel utilisateur

Bosch

Bosch D9412GV4 Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuel utilisateur

Sminn

Sminn BOX L VF1L EI Manuel utilisateur

Balboa

Balboa TP600 Manuel utilisateur

Nice

Nice HSCU1 Caractéristiques techniques