Norton clipper CR 11 B Manuel utilisateur
CR 11 B
Rammer
OPERATING INSTRUCTIONS
Translation of the original Instructions
VERS. 2023.03.15 CR 11 B _MAN_EN
2
VERS. 2023.03.15 CR 11 B _MAN_EN
3
The undersigned manufacturer: SAINT - GOBAIN ABRASIVES S.A.
190, BD. J. F. KENNEDY
L-4930 BASCHARAGE
Declares that this product: Norton clipper CR 11 B Code: 70184632595
Is in conformity with the following Directives:
"MACHINES" 2006/42/CE
"NOISE" 2000/14/CE
And European standard :
•EN 500-1 Mobile road construction machinery. Safety - Part 1: Common requirements
•En 500-4 Mobile road construction machinery - Safety - Part 4: Specific requirements for
compaction machines
Valid for machines as of serial number : 450xxxxxxx
Storage site for the technical documents :
Saint-Gobain Abrasives 190, Bd. J. F. Kennedy 4930 BASCHARAGE, LUXEMBOURG
This declaration of conformity loses its validity when the product is converted or modified without agreement.
Bascharage, le 14.03.2023 :
François Chianese, executive officer and responsible for the technical file.
Bascharage, Luxembourg.
Declaration of conformity
VERS. 2023.03.15 CR 11 B _MAN_EN
4
The undersigned manufacturer:
SAINT - GOBAIN ABRASIVES S.A.
190, BD J.F. KENNEDY
L- 4930 BASCHARAGE
Declares that this product:
Compactor CR 11 B Code: 70184632595
is in conformity with the following standard:
•Supply of Machinery (Safety) Regulations 2008
•Noise Emission in the Environment by Equipment
for use Outdoors Regulations 2001
And European standard :
•EN 500-1 Mobile road construction machinery. Safety - Part 1: Common requirements
•EN 500-4 Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction
machines
Valid for machines with a serial number greater than: 450xxxxxxx
Authorised Representative:
SAINT-GOBAIN ABRASIVES
Unicorn House • Unit 1, Amison Close
Redhill Business Park • Stafford • England • ST16 1WB
This declaration of conformity loses its validity when the product is converted or modified without
agreement.
Bascharage, 14.03.2023
François Chianese, executive officer and responsible for the technical file.
Bascharage, Luxembourg.
Declaration of conformity
VERS. 2023.03.15 CR 11 B _MAN_EN
5
Norton Clipper CR 11 B
OPERATING INSTRUCTIONS
TABLE OF CONTENTS
1BASIC SAFETY INSTRUCTIONS 6
1.1 Symbols 6
1.2 Machine plate 7
1.3 Safety instructions for particular operating phases 7
2MACHINE DESCRIPTION 8
2.1 Short description 8
2.2 Layout 9
2.3 Technical DATA 11
2.4 Vibration measurements 11
2.5 Sound measurements 11
3ASSEMBLY AND COMMISSIONING 12
3.1 Starting the machine 12
3.2 Quick reference guide for operation 12
3.3 Battery fixation and starting the machine 13
3.4 Charging the battery 14
4OPERATING THE MACHINE 14
4.1 Site of work 14
4.2 Preparing the site 14
5TRANSPORT AND STORING 14
5.1 Transport procedure 14
5.2 Long period of inactivity 14
6MAINTENANCE AND SERVICE 15
6.1 Maintenance of the machine 15
6.2 Maintenance of the eGX Honda 16
7FAULT: CAUSES AND CURES 17
7.1 Fault –finding procedures 17
7.2 Troubles-shooting guide 17
7.3 Customer service 18
7.4 Spare parts 19
VERS. 2023.03.15 CR 11 B _MAN_EN
6
1 BASIC SAFETY INSTRUCTIONS
The Norton Clipper CR 11 B is exclusively designed for compaction mainly on construction sites.
Uses other than the manufacturer's instructions shall be considered as contravening the regulations.
The manufacturer shall not be held responsible for any resulting damage. Any risk shall be borne
entirely by the user. Observing the operating instructions and compliance with inspection and
servicing requirements shall also be considered as included under use in accordance with the
regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The following
symbols are used on the machine:
Read operator's instructions
Ear protection must be worn
Hand protection must be worn
Eye protection shall be worn
VERS. 2023.03.15 CR 11 B _MAN_EN
7
1.2 Machine plate
Important data can be found on the following plate located on the machine:
1.3 Safety instructions for particular operating phases
Before starting the work
•Before commencing work, make yourself familiar with the working environment at the place of
use. The working environment includes: obstacles in the area of work and manoeuvre, the
firmness of the floor, necessary protection at the site relating to public thoroughfares and the
availability of help in the event of accidents.
•This machine must only be used for its intended purpose, and must be operated only by the
well-trained personnel.
•Know how to stop the engine quickly, and understand the operation of all controls BEFORE
attempting to operate the machine.
•The machine must be operated on ground where stability is guaranteed. When working near
the rim of excavated trenches, be alert to potential caving edges, falling rocks, and slides.
•Do not attempt to run the machine with any of the covers, labels, and/or any other
components removed from the machine. Unauthorized alteration or modification of the
engine or the machine is prohibited, as it will affect the machine's performance and may lead
to danger in operation.
Machine model
Machine code
Machine Weight
Year of production
Serial number
VERS. 2023.03.15 CR 11 B _MAN_EN
8
2 MACHINE DESCRIPTION
Any modification, which could lead to a change in the original characteristics of the machine, may be
done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity with the
safety regulations.
2.1 Short description
The rammer CR 11 B is suitable for repairing asphalted surfaces, for small compacting jobs and for
preparing green areas
As with all other NORTON products, the operator will immediately appreciate the attention given to
detail and quality of materials used in construction. The machine and its component parts are
assembled to high standards assuring long life and minimum maintenance.
VERS. 2023.03.15 CR 11 B _MAN_EN
9
2.2 Layout
Handlebar (1)
Jig welded steel construction is connected by 4 shock mount on the frame of the machine to reduce
the vibrations reach the operator
Lifting eye (2)
To lift the machine easily and safely, a lifting eye is located over the engine. This allows a balanced
lifting of the machine.
Battery motor and control panel (3)
The eGX battery engine from Honda which integrates the battery directly on the engine
On the control panel you can find:
- The Power button
- The ON/OFF switch
- The 3 LEDs (green, orange and red) to indicate the state of the motor
- The Speed selector (3 speeds available: 3000 rpm, 3300 rpm and 3600 rpm)
Transfert box (4)
oil bath transfer box which transmits the vibration to the soleplate via the piston / cylinder
Piston/Cylinder (5)
Transmits the vibration to the soleplate
SolePlate (6)
The sole plates have rounded edges and raised to avoid marking the surface
transport handle (7)
VERS. 2023.03.15 CR 11 B _MAN_EN
10
Table des matières
Autres manuels Norton Outils électriques
