Front and Rear Panel Drawings
Front Control Panel
Rear Panel
Description of Front Panel
1. POWER INDICATOR:
LED light on indicates power on.
2. MENU/AUTO SEQUENTIAL SWITCHING BUTTON:
This button is used for the setup or a change of Time, Date, Title, etc.
. Press and hold this button to enter the menu settings.
. Quickly press this button to go into automatic sequential switching mode.
3. QUAD SCREEN/EXIT BUTTON:
. Press this button for a quadrant picture view.
. While in the menu setting, press this button to exit the setup menu.
4. CAMERA 1 FULL SCREEN/CURSOR MOVING BUTTON:
. Press this button for camera 1 full screen view.
. While in the menu setting, press this button to move the cursor.
5. CAMERA 2 FULL SCREEN/CURSOR MOVING BUTTON:
. Press this button for camera 2 full screen view.
. While in the menu setting, press this button to move the cursor.
6. CAMERA 3 FULL SCREEN/CURSOR MOVING BUTTON:
. Press this button for camera 3 full screen view.
. While in the menu setting, press this button that can set up the functions.
7. CAMERA 4 FULL SCREEN/CURSOR MOVING BUTTON:
. Press this button for camera 4 full screen view.
. While in the menu setting, press this button that can set up the functions.
Description of Rear Panel
8.CAMERA INPUT TERMINALS:
Up to 4 cameras can be connected to these terminals.
9. MONITOR OUTPUT TERMINAL:
Connect this jack to the monitor for live surveillance. 1 x HDMI jack, 1 x VGA jack 1 x CVBS jack.
10. POWER JACK:
Use DC 12V, 500 mA adapter input. (AC power adapter included)
11. LOOPING CAMERA OUTPUTS
These connectors are used for extending the camera inputs to other accessories.
How to Operate and Program
A. MONITORING FUNCTIONS:
1. After plugged in the monitor displays as below.
CH1
：
：
2. Full Screen Button: Press any one of the UP、DOWN、LEFT、RIGHT buttons in the front panel, that the
corresponding camera is selected
for a full screen view.
3. Quad Screen Button: Press the EXIT button for a quadrant picture view.
4. Automatic Sequential Switching Button: Slightly press the MENU button it will enter automatic sequential
switching mode.
B. THE SETUP MENU﹕
Press the MENU button for more than 3 second, the system setup menu will appear on the screen as below.
1. CAMERA TITLE
2. TIME / DATE
3. PICTURE ADJUST
4. DISPLAY MODE
5. AUTO ADJUST
6. VIDEO SIGNAL
7. OUTPUT MODE
1. CAMERA TITLE：
Move to the CAMERA TITLE location, then press the MENU button, a screen will appear as below.
CH1: CH1
CH2: CH2
CH3: CH3
CH4: CH4
