Thank you verymuch for choosinga NORTHERN TOOL + EQUIPMENT CO., Inc.,Product! For future
reference, please completethe owner's recordbelow:
Model: _______________ PurchaseDate: _______________
Save the receipt,warranty and theseinstructions. It isimportant that youread the entiremanual to
become familiar withthis product beforeyou begin usingit.
This machine isdesigned for certainapplications only.Northern Tool + Equipmentstrongly recommends
that this machineis not modifiedand/or used forany application otherthan that forwhich it wasdesigned.
If you haveany questions relativeto a particularapplication, DO NOTuse the machineuntil you havefirst
contacted Northern Tool + Equipmentto determine ifit can orshould be performedon the product.Before
using this product,please read thefollowing instructions carefully.
For technical questionsand replacement parts,please call 1-800-222-5381.
DESCRIPTION
This reversible airdrill has durablelightweight aluminum housing,a variable speed trigger for precision
and includes aquick release coupler. This productis an ergonomicchoice for drilling,honing and hole
sawing.
TECHNICAL SPECIFICATIONS
Save These Instructions.
This manual hasall the necessarysafety warnings andprecautions. It alsocontains assembly,operating,
and maintenance procedures.Look in theback for theparts list andassembly diagram. Keepthis manual
and invoice ina safe anddry place forfuture reference.
WARNINGS AND SAFETY RULES
WARNING: The warnings, cautions,and instructions inthis owner's manualcannot cover all
possible conditions andsituations that mayoccur. Itmust be understoodby the operatorthat common
sense and cautionare factors thatcannot be builtinto this product,but must besupplied by theoperator.
1.Keep thework area clean.An untidy andcluttered work areaincreases the riskof accidents.
2.Always wearsafety glasses orgoggles. Afacemask should beworn when dustis generated.
3.Wear suitablework clothes. Do not wearloose fitting clothesor jewelry.They can becaught in
moving parts andmay cause injury. For outdoor work, rubber gloves and non-slip footwear are advised.
Wear a protectivehair net tocontain long hair.
4.Takeprecautions with compressedair. Do not disconnect air hoses ortools when theline is under
pressure. Close offair supply andrelease pressure first.Do not pointtools or directcompressed air at
people or animals.
5.Observe workarea environment. Do not expose air tools to rain or wet conditions. Do not use air tools
in close proximityto flammable liquidsor gases. Thework area shouldbe well litand ventilated.
6.Keep pets,untrained operators andchildren away.Children should be kept away fromthe work area.
Do not permitthem to handlethe tool ortool cable.
7.Secure thework pieces. Use clamps or a vice to hold your work. This will freeup both handsto
operate the tool.
8.Do notoverreach when working.Keep a balancedfooting at alltimes. Avoidabnormal stances and
awkward body positioning.
9.Do notoverload or forcetools. Toolsoperate better inthe specified performanceranges. Forcing the
tool may causemotor damage.
10.Check fordamage. Always check theprotection guards carefullyto ensure properoperation and
performance before use.Check for alignmentof moving parts,binding of movingparts, breakage of
parts, mountings, andany other conditionsthat may effectthe tool's operation.In cases ofsevere
impact, a crackor damage mayoccur do notuse a toolif a crackdevelops or ifair is escaping.
11.Useair tools fortheir intended purpose.Do not forcea small toolor accessory todo the jobof a
Heavy-duty tool. Donot exceed therecommended air pressure.
1 OF 4
Item
Chuck Size
No-load Speed
Air Consumption
Air Inlet Diameter
Min. Hose Size
Max. Air Pressure
Description
3/8" (10mm)
2200 RPM
4 CFM @90 PSI
1/4" -18 NPT
3/8" ID
90 PSI
