Nortel 400 Manuel utilisateur

Nortel Communication Server 1000

Hospitality Messaging Server 400

Staff Telephone User Interface Quick Reference Guide

Hospitality Messaging Server 400

Page 3

Introduction

This guide highlights the options available from the Staff Telephone User Interface

(TUI). The TUI was specifically designed to provide an easy and convenient way for

Administrators to perform common maintenance and administrative tasks from a

telephone set instead of directly from the system. It offers similar functions to those

provided by the Meridian Mail HVS Guest Administration Console (GAC). This feature

is currently available in English (American), British, German, Russian, Italian, French,

Spanish (Latin American), Mandarin, and Japanese.

TUI Access

Dial the TUI access number and enter the password. Consult your System Administrator

to obtain both the TUI access number (DN) and Password.

Menu Options

Once a valid password is entered, the user will be presented with 3 options:

For PMS Menu, press 1

For Guest Services Menu, press 2

For Prompt Maintenance Menu, press 3

To record Welcome Prompt, press 4 (Hidden Option – not prompted)

Below is the sub-menu for each option followed by a brief explanation of each function:

Property Management Services (PMS)

1) Check In a room

-Enter room number, # (termination key)

-System validates entry

-‘Command Activated’ prompt played (if valid)

-Returns to PMS Menu

LNote: A room that is checked-in through this function will have “New

Guest” as its name

2) Check Out a room

-Enter room number, # (termination key)

-System validates entry

-‘Command Activated’ prompt played (if valid)

-Returns to PMS Menu

LNote: A room that is checked-out through this function will have its name

deleted

3) Move a guest to another room

-Enter Old room number, # (termination key)

-Enter New room number, # (termination key)

LNote: New room must be a vacant room

-‘Command Activated’ prompt played

-Returns to PMS Menu

Hospitality Messaging Server 400

Page 4

4) Change the language of a Guest Mailbox

-Enter room number, # (termination key)

-Enter language code, # (termination key)

-‘Command Activated’ prompt played

-Returns to PMS Menu

LNote: The list of language codes can be acquired by the system

administrator as described in the section “Obtaining List Of Language

Codes” on page 6.

Guest Services

1) Reset Mailbox Password

-Enter room number, # (termination key)

-‘Password Reset’ prompt played

-Returns to Guest Services Menu

2) Enable a Mailbox (Admin mailboxes only)

-Enter extension number, # (termination key)

-‘Command Activated’ prompt played (if valid)

-Returns to Guest Services Menu

LNote: This actually re-enables a disabled mailbox; it doesn’t create a new

one. Creation of a new mailbox can only be done from the system’s VM Office

GUI by the System Administrator. A re-enabled mailbox’s language will

follow that set in the “Default Check In/Admin MBOX Language” parameter

found in the PMSI Configuration GUI

3) Disable a Mailbox (Admin mailboxes only)

-Enter extension number, # (termination key)

-‘Command Activated’ prompt played (if valid)

-Returns to Guest Services Menu

4) Set or Cancel a Wake Up Call for one guest or a group of guests

-Enter room number, # (termination key) OR * followed by Distribution

List number, #

-System checks whether there is a previous AWU call set

-If so, it announces the AWU time followed by current time

-If not, it straightaway plays the current time

-Enter new AWU time using the 24-hour clock format OR ‘****’ to cancel

previous AWU time

-System echoes the new AWU time as confirmation

-Returns to Guest Services Menu

5) Retrieve Post Checked Out message

-< Put the caller on hold after getting pertinent guest information (name,

room number, and checked-out date)>

-Enter checked-out guest’s room number, # (termination key)

-Enter check-out date (MMDD format)

-<Connect the call to checked-out guest>

Hospitality Messaging Server 400

Page 5

-System announces number of messages

LNote: The maximum number of days post checked-out messages can be kept

by the system is 99 days but the default is set to 2

6) Undelete messages

-Enter room number, # (termination key)

-System validates entry and looks up mailbox number for that room

-All messages that were deleted prior to this will be restored

Prompt Maintenance

This option provides the ability to record prompts primarily for Auto Attendant

usage. However, it can also be used to record customized auto-wakeup (AWU)

prompts. A prompt must be given a unique 4-digit ID prior to recording.

-Enter 4-digit ID

-Record after the tone and press 1 to stop

•Press 1 to Confirm

•Press 2 to Listen to new prompt

•Press 3 to Re-record

•Press 4 to Cancel

All prompts recorded would be saved on the HMS 400 server in the “AAPrompt”

sub-folder of the corresponding language of the line. For instance, if the voicemail

lines have been configured as French, then all recorded prompts will be found in:

C:\HM\Sound\French\AAPrompt\.

LNote: When customizing an AWU prompt, the recorded prompt MUST

be renamed to the following – Autocall.x40 (where x denotes the

designated letter for each language with the exception for Greek, Dutch,

and Thai whose extension is Gre, Dut, and Tha) – and then copied to the

corresponding language folder.

ÌCaution: Only experienced HMS 400 System Administrators should

attempt to move prompt files on the server. Changing or deleting prompts

other than those mentioned in this section could result in a non-

functioning voicemail system.

Welcome Prompt Recording

This is a hidden option (meaning there are no prompts for the feature) for

recording customized hotel welcome prompts. The steps are as follows:

-Press 4 followed by the 2-digit language code, #

-Record after the tone and press 1 to stop

•Press 1 to Confirm

•Press 2 to Listen to new prompt

•Press 3 to Re-record

•Press 4 to Cancel

Hospitality Messaging Server 400

Page 6

Obtaining List Of Language Codes

To obtain the complete list of language codes currently used in the system, click

System on the menu bar of the main screen and then select ‘Languages List’.

Nortel Communication Server 1000

Hospitality Messaging Server 400

Staff Telephone User Interface Quick Reference Guide

The information in this document is subject to change without notice. The

statements, configurations, technical data, and recommendations in this

document are believed to be accurate and reliable, but are presented without

express or implied warranty. Users must take full responsibility for their

applications of any products specified in this document. The information in this

document is proprietary to Nortel Networks.

Nortel, Nortel (Logo), the Globemark, SL-1, Meridian 1, and HMS400 are

trademarks of Nortel Networks.

Document Number: NN42350-100

Document Release: Standard 2.0

Date: March 2007

Produced in Canada

Internet address

www.nortel.com

Table des matières

Autres manuels Nortel Serveur

Nortel

Nortel CallPilot Manuel utilisateur

Nortel

Nortel Call Center Telephone Mode d’emploi

Nortel

Nortel CallPilot Instructions d'utilisation et d'entretien

Nortel

Nortel 1002rp Manuel

Nortel

Nortel HMS400 Manuel d'utilisation

Nortel

Nortel 5100 Series Release 2.3.3 Manuel du propriétaire

Nortel

Nortel 5100 Series Release 2.3.3 Manuel

Nortel

Nortel 201i Guide de configuration

Nortel

Nortel 5100 Series Release 2.3.3 Mode d’emploi

Nortel

Nortel 703t Manuel

Nortel

Nortel Communication Server 1000 Mode d’emploi

Nortel

Nortel 5100 Series Release 2.3.3 Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Mode d’emploi

Nortel

Nortel Passport 4460 Guide d'application

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Nortel

Nortel CallPilot Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Nortel

Nortel 2100 Manuel utilisateur

Nortel

Nortel Enterprise Edge 2.0 Messaging Manuel utilisateur

Nortel

Nortel CallPilot Series Manuel d'installation et d'exploitation

Nortel

Nortel 1000E Guide de démarrage rapide

Nortel

Nortel 1000S Instructions d'utilisation et d'entretien

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Nortel

Nortel CallPilot 1005r Manuel

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur