Noraxon MyoSync 262 Manuel utilisateur

MyoMOTION Data Logger User Manual

P-2628 Rev B

MyoSync



User Manual

MyoMOTION Data Logger User Manual

P-2628 Rev B

For questions, concerns or additional assistance please contact Noraxon or its Authorized

Representative as specified below.

Manufacturer:

Noraxon U.S.A. Inc.

15770 North Greenwa -Ha den Loop, Suite 100

Scottsdale, AZ 85260

Tel: (480) 443-3413

Fax: (480) 443-4327

Email: info@noraxon.com

Support Email: [email protected]

Web Site: www.noraxon.com

Authorized European Representative:

tive:tive:

tive:

EC EC

REP

REP REP

REP

Advena Limited, Tower Business Centre, 2nd Flr., Tower Street, Swatar, BKR

40 3 Malta

Website: http://www.advenamedical.com

No part of this document ma be copied, photographed, reproduced, translated, or reduced to

an electronic medium or machine-readable form without prior written consent of Noraxon U.S.A.

Inc.

Noraxon and m oRESEARCH are registered trademarks and the Noraxon logo, m oANALOG, m oFORCE, m oMETRICS, m oMOTION,

m oMUSCLE, m oPRESSURE, m oVIDEO, m oSYNC, NiNOX, TRUs nc and Ultium are common-law trademarks of Noraxon U.S.A., Inc.

C Mark: This s mbol indicates the clearance to

market this product in the European Communit .

MyoMOTION Data Logger User Manual

P-2628 Rev B

Table of Contents

Table of ContentsTable of Contents

Table of Contents

Section 1: Introduction

Brief Description ...................................................................................................... 1

Intended Use .......................................................................................................... 1

Contraindications ...................................................................................................... 1

Section 2: Definitions

Graphic S mbols and Meanings............................................................................... 2

Glossar of Terms ................................................................................................... 2

Section 3: Identification

Model Designation ................................................................................................... 3

Product Versions and Configurations ...................................................................... 3

Section 4: General Warnings and Cautions

Risks and Benefits .................................................................................................... 4

Safet Information Summar ................................................................................... 4

Section 5: Getting Started

Quick Start Guides .................................................................................................. 4

Section 6: Preparing the Product for se (Setup Instructions)

Unpacking and Component Identification ................................................................ 5

Component Inputs, Outputs and Indicators .............................................................. 5

Component Interconnections ................................................................................... 6

Device Communication (Driver) Software Installation ............................................. 7

Companion Software Installation ............................................................................. 7

Companion Software Configuration ........................................................................ 7

Section 7: Pre-use Check-out

Normal Appearance of Signals ................................................................................. 9

Attaching the M oS nc to a S stem ......................................................................... 9

Calibration ................................................................................................................. 9

Section 8: Operating Instructions

Safet Information Summar .................................................................................... 10

Normal Functions with Interface in PC ..................................................................... 10

Exceptional Functions/Situations (error messages) ................................................. 10

Section 9: Accessories and Optional Modules

Accessories .............................................................................................................. 11

Interfaces to Other Devices ...................................................................................... 12

Section 10: Cleaning

Safet Precautions When Cleaning .......................................................................... 13

Cleaning b Users .................................................................................................... 13

Section 11: Maintenance

Safet Precautions When Performing Maintenance................................................. 14

Maintenance b Users .............................................................................................. 14

Maintenance b Qualified Individuals ....................................................................... 14

Section 12: Trouble-shooting, Fault Diagnosis

Troubleshooting Chart .............................................................................................. 15

Website Link to FAQ ................................................................................................. 15

Section 13: Service and Repair

Availabilit of Circuit Diagrams and Component Lists ............................................. 16

Warrant Information ................................................................................................ 16

Submitting Service Requests ................................................................................... 16

Returning Equipment ................................................................................................ 16

MyoMOTION Data Logger User Manual

P-2628 Rev B

iii

Section 14: List of Spare Parts and Consumables

Consumable Items (electrodes and sensor elements) ............................................. 17

Replaceable Items (fuses, batteries, lead sets) ...................................................... 17

Section 15: Taking Product Out of Operation

Disposal of Equipment and Batteries ....................................................................... 17

Section 16: Specifications of the Product

Expected Useful Lifetime .......................................................................................... 18

Dimensions and Weight ........................................................................................... 18

Performance Characteristics ................................................................................... 18

Energ Consumption, Condition of Use .................................................................. 18

Environmental Conditions for Storage and Transport ............................................. 18

IP (Ingress Protection) Rating .................................................................................. 18

Section 17: Technical Information

Block Diagram ......................................................................................................... 19

Theor of Operation ................................................................................................. 19

Noraxon U.S.A, Inc. M oS nc

P-2628 Rev B

Section 1: Introduction

Section 1: IntroductionSection 1: Introduction

Section 1: Introduction

Brief Description

The M oS nc is a versatile s nchronization s stem that can be used with various Noraxon

s stems as well as video. This special s nc device is for use with a multi-device Noraxon setup

and the Noraxon MR3 software to s nchronize all signals received b the software.

The M oS nc utilizes both wireless and cable connections to send a s nc signal to the connected

devices. The M oS nc has a wireless s nc transmitter (262A) option that can be purchased

separatel . This option will enable s wireless s nc signal to be sent to a wireless s nc receiver

connected to the Noraxon device being used. Without the wireless s nc transmitter the M oS nc

sends a s nc pulse solel via s nc cables.

All connections to the M oS nc are stereo connections while the other end of the s nc cable will

var depending between s stems. The M oS nc receives its signal from one of two sources: PC

or external. When connected to the PC via USB, the M os nc can use this connection to

generate a s nc source, or it can receive a s nc pulse from an external device that generates the

s nc signal.

Intended se

The M oS nc is intended to send out a s nc pulse to all connected s stems. This s nc pulse can

then be used to s nchronize the various signals retrieved from multiple s stems. In combination

with the MR3 software, the s nchronization of these signals is done automaticall and signals are

displa ed in s nchronization. The onl exception to this is some video cameras which have to be

manuall s nchronized and this option is onl available with the M oVideo module.

Intended Users

Researchers or individuals trained in ph sical medicine, ph sical therap or ergonomics

Subject Populations – Medical

Individuals with cerebral pals , ph sical injuries, post-surgical or post stroke conditions

Subject Populations – Non medical

Athletes, workers at their worksite, subjects in new product trials

Common Applications

S nchronizing different signals received from a multi-device setup

Contraindications

None

MyoMOTION Data Logger User Manual

P-2628 Rev B

Section 2: Definitions

Section 2: DefinitionsSection 2: Definitions

Section 2: Definitions

Graphic Symbols and Meaning

The following international icons and s mbols are found on the M oS nc enclosures and in this

user manual. Their meaning is described below.

The device generates radio frequency energy during operation.

The USB cable is applied to this connection.

Read material in the Instruction Manual wherever this symbol

appears.

Identifies the manufacturer of the device.

Identifies the serial number of the device.

dditional information available in a separate document

Glossary of Terms

Pulse – A generic term for s nc signal.

S nc – Short for s nchronization. A number of events, in this case signals, are coordinated to

operate in unison.

S nc Signal – The signal transmitted from the M oS nc that is used to coordinate all the signals.

In MR3, the software reads the s nc signals and lines ever thing up in unison.

MyoMOTION Data Logger User Manual

P-2628 Rev B

Section 3: Identification

Section 3: IdentificationSection 3: Identification

Section 3: Identification

Model Designation

Model 262 M oS nc (Master S nc)

Product Versions and Configurations

The model 262 M oS nc can accommodate a single s nc in pulse and up to 5 s nc out pulses

and 1 inverted s nc out pulse.

For additional equipment details refer to Section 9 of this manual.

As the M oS nc requires software to perform its function, the equipment is offered in combination

with the following computer program packages:

Model 430-433 m oMUSCLE

Model 440/443 m oVIDEO

Model 460/463 m oMOTION

Model 450-452 m oPRESSURE

MyoMOTION Data Logger User Manual

P-2628 Rev B

Section 4: General Warnings and Cautions

Section 4: General Warnings and CautionsSection 4: General Warnings and Cautions

Section 4: General Warnings and Cautions

Risks and Benefits

There is no identified risk of physical harm or injury with use of the M oS nc product. The

benefit provided b use of the device is the provision of s nchronization of signals from multiple

Noraxon devices.

Safety Information Summary

Warnings

 Do not expose the M oS nc to water or liquid

 Do not use the equipment on individuals undergoing MRI, Electro Surger or Defibrillation

Section : Getting Started

Section : Getting Started Section : Getting Started

Section : Getting Started

Quick Start Guides

Please see the Manual for the devices connected to MR3 to see their specific quick start

guide.

Note: The Noraxon Mast S nc is automaticall inserted into configurations with devices where

s nc is selected, so the icon will not appear as an insertable device.

MyoMOTION Data Logger User Manual

P-2628 Rev B

Section 6: Preparing the Product for Use

Section 6: Preparing the Product for Use Section 6: Preparing the Product for Use

Section 6: Preparing the Product for Use

(Set

(Set(Set

(Set-

-up Instructions)

up Instructions)up Instructions)

up Instructions)

npacking and Component Identification

MyoSync (part #262)

to B USB Cable (part #CBL2)

Additional

ntents not illustrated

MyoSync User

Manual (part #

262C

)

This document

If additional accessories have been included please see Section 9, ccessories for component

identification.

Component Inputs, Outputs and Indicators

MyoSync (top)

1 Wireless Port – To plug in wireless sync

transmitter module

2 Not Ready Indicator– Illuminated when

device is not set up appropriately

3 External Sync Indicator – Illuminates

when there is an external sync source

plugged in

4 Sync Source – Illuminates to indicate the

sync signal is generated by the computer

(PC) or an external source (EXT)

5 Sync Out Port – Ports to plug in sync

cables so the MyoSync can transmit a sync

signal to other devices

6 Sync Out Inverted – Port to plug in sync

cable to transmit an inverted sync signal to

another device

MyoMOTION Data Logger User Manual

P-2628 Rev B

b MyoSync (side)

1 USB Port – to B style to USB connection

2 External Sync Port – Sync in allows the

MyoSync to accept a sync signal from

another source and time

3 Invert Signal – Inverts or does not invert

the sync signal depending on the direction

of the switch

Component Interconnections

Step 1

Insert the mating (smaller) end of the

USB cable (CBL2) into the USB

connector on the side of the MyoSync.

Insert the opposite end of the USB

cable into an available USB port on the

computer.

Step 2a

If using an external source to generate

the sync pulse, plug the sync cable

from the external source into the

external sync port.

Step 2b

If using wireless sync, insert the

wireless sync transmitter into the

wireless sync port.

Step 2c

Plug in the sync cables for the systems

receiving a sync pulse from the

MyoSync into the Sync Out ports. The

other end will plug into the Sync In

port of the system.

Table des matières

Autres manuels Noraxon Enregistreur de données

Noraxon

Noraxon myoMOTION 682 Manuel utilisateur

Manuels Enregistreur de données populaires d'autres marques

TESTO

TESTO 176 Manuel utilisateur

HT Italia

HT Italia XL421 Manuel utilisateur

HBM

HBM SOMAT XR CX22B-R Manuel utilisateur

Agtrix

Agtrix 380i Manuel utilisateur

Hobo

Hobo H8 Pro Manuel utilisateur

Beijing ART Tech

Beijing ART Tech PCI2320 Manuel utilisateur

Athena

Athena GET SL1 Manuel utilisateur

Motec Systems

Motec Systems C185 Manuel utilisateur

Beijing ART Tech

Beijing ART Tech USB2832 Manuel utilisateur

Rotronic

Rotronic HygroLog HL20 Manuel utilisateur

MRC

MRC DW-6092 Manuel utilisateur

Racelogic

Racelogic VBOX LapTimer Manuel utilisateur

Edu-Logger

Edu-Logger 900-240 Manuel utilisateur

Elma

Elma DT173 Manuel utilisateur

MadgeTech

MadgeTech PRTemp140 Fiche technique

Comet

Comet U0121M Manuel utilisateur

pico Technology

pico Technology PT-104 Manuel utilisateur

Soil Instruments

Soil Instruments GTecLink Manuel utilisateur