Norac UC4+ Manuel utilisateur
Case IH 4420, 3320 Installation Manual
Spray Height Controller
Improving the competitiveness of Industry and
Agriculture through recision Measurement
Printed in Canada
Copyright 2005-08 by NORAC Systems International Inc
Reorder P/N: UC4+BC+CS3-INST Rev G (Case International 4420, 3320)
NOTICE
NORAC Systems International Inc reserves the right to improve products and their specifications without notice and without the
requirement to update products sold previously Every effort has been made to ensure the accuracy of the information contained
in this manual The technical information in this manual was reviewed at the time of approval for publication
TABLE OF CONTENTS
1
INTRODUCTION .................................................................................................................................. 1
2
GENERAL SYSTEM DESCRIPTION .................................................................................................. 2
3
PARTS LISTS ...................................................................................................................................... 4
4
INSTALLATION PROCEDURE ........................................................................................................... 9
4.1
EXISTING SYSTEM CHECK ............................................................................................................... 9
4.2
BOOM SPEED TEST........................................................................................................................ 9
4.3
WING SENSOR INSTALLATION....................................................................................................... 11
4.4
MAIN LIFT SENSOR INSTALLATION.................................................................................................. 14
4.5
ROLL SENSOR INSTALLATION ....................................................................................................... 15
4.5.1
Boom Frame Roll Sensor Mounting ...................................................................................... 16
4.5.2
Chassis Roll Sensor Mounting .............................................................................................. 17
4.6
HYDRAULIC INSTALLATION ........................................................................................................... 1
4.6.1
Valve Assembl ..................................................................................................................... 18
4.6.2
Valve Mounting...................................................................................................................... 19
4.6.3
H draulic Plumbing ............................................................................................................... 20
4.6.4
120’ Boom Orifice Installation................................................................................................21
4.7
ELECTRICAL INSTALLATION .......................................................................................................... 22
4.
COMPLETING THE INSTALLATION .................................................................................................. 26
5
ELECTRICAL REFERENCE – CABLE DRAWINGS ........................................................................ 27
5.1
ITEM C02: 4466 – SENSOR BRANCH CABLE ............................................................................... 27
5.2
ITEM C02B: 44664 – CABLE UC4 CAN NODE ............................................................................. 27
5.3
ITEM C03: 44656D – CABLE VALVE VARIABLE RATE DT.............................................................. 2
5.4
ITEM C10: 44650-39 – CABLE POWER GENERIC SELF-PROPELLED .............................................. 29
5.5
ITEM C11: 44651-03 – CABLE EXTENSION CABLE VALVE GENERIC .............................................. 30
5.6
ITEM C12: 4465 -24 – CABLE INTERFACE UC4 C12 DT06-2X GND2.......................................... 31
5.7
ITEM C13: 4465 -47 – CABLE INTERFACE UC4 BC C13 DT2 MAIN EXTENSION ........................... 32
5.
ITEM C14: 4465 -2 – CABLE INTERFACE UC4 BC C14 POWER PIGTAIL ..................................... 33
1
1
INTRODUCTION
Congratulations on your purchase of the NORAC UC4+ Spray Height Controller This system is
manufactured with top quality components and is engineered using the latest technology to
provide operating features and reliability unmatched for years to come
When properly used the system can provide protection from sprayer boom damage, improve
sprayer efficiency, and ensure chemicals are applied correctly
Please take the time to read this manual completely before attempting to install the system A
thorough understanding of this manual will ensure that you receive the maximum benefit from
the system
YOUR INPUT CAN HELP MAKE US BETTER! If you find issues or ha e suggestions
regarding the parts list or the installation procedure, please don’t hesitate to contact us ia
the information gi en below:
Phone: 1-800-667-3921 Canada (Toll Free)
1-866-306-6722 United States (Toll Free)
(+33) 06 03 87 80 78 Europe
1-306-664-6711 all other regions
E-mail: ser [email protected]
Website: www.norac.ca
2
2
GENERAL SYSTEM DESCRIPTION
Figure 1 depicts the general system layout of the UC4+ Spray Height Control system
Figure 1 – System Components and General Location
NOTICE:
Every effort has been made to ensure the
accuracy of the information contained in this
manual All parts supplied are selected
specially to fit the sprayer to facilitate a
complete installation However, NORAC
cannot guarantee all parts fit as intended due
to the variations of the sprayer by the
manufacturer Please read this manual in
its entirety before attempting installation.
ATTENTION:
When installing the UC4+ Spray Height
Control system please be aware that at a
point in the installation your sprayer booms
will be inoperative until the installation is
complete Any installation procedure
requiring boom mo ement will need to be
done first. Once the hydraulics have been
disconnected you must complete the
electrical installation before the booms
become operative
4
3
PARTS LISTS
The parts that come with your UC4+ Sprayer Boom System are listed in Table 1. The item
number on the left side of this table references each part Please ensure that all parts in your
kit are present before proceeding with your installation.
Table 1 – Case 4420/3320 Sprayer Boom Control System Parts
Item Part Number Name Quantity
B05 44706-01 KIT CABLE TIE BLACK 10 PCS 21 IN 150 PCS 7 5 IN 1
B11 44743 MOUNTING BRACKET MAIN LIFT SENSOR UC4 PLUS 1
B13 44728 MOUNTING BRACKET COMPLETE UC4 BREAKAWAY EXTENDED 2
C02 44668 CABLE UC3 SENSOR BRANCH 1 AMP RECEPT 3 AMP PLUG BC 1
C02B 44664 CABLE UC4 CAN NODE DUAL 1
C03 44656D CABLE VALVE VARIABLE RATE DT 1
C10 44650-39 CABLE POWER GENERIC SELF-PROPELLED 1
C11 44651-03 CABLE EXTENSION VALVE GENERIC 1
C12 44658-24 CABLE INTERFACE UC4 C12 DT06-2X GND2 1
C13 44658-47 CABLE INTERFACE UC4 C13 DT2 MAIN EXTENSION 1
C14 44658-28 CABLE INTERFACE UC4 C14 POWER PIGTAIL 1
E01 4461BC+ UC4 PLUS BOOM CONTROL PANEL 1
E02 44631 UC4 ULTRASOUND SENSOR 3
E03 44641 UC4 PLUS ROLL SENSOR W TEMPERATURE PROBE 1
E04 44642 UC4 PLUS ROLL SENSOR 1
H04 44862-08 HOSE ASSEMBLY 122R2-04 36 IN L 6FORX 6FORX 2
H05 44863-10 HOSE ASSEMBLY 122R2-06 60 IN L 6FJX 8FORX 2
H07 44863-25 HOSE ASSEMBLY 122R2-06 136 IN L 6FORX 6FORX 1
H08 44863-31 HOSE ASSEMBLY 122R2-06 106 IN L 6FORX 6FORX 1
H20 44865-06 HYDRAULICS FITTING KIT - CS3 1
M01 446BC+MAN7 OPERATOR MANUAL UC4+ SPRAY HEIGHT CONTROL 1
M10 UC4+BC+CS3-INST MANUAL INSTALL UC4 CASE IH 4420, 3320 1
V01 44963D VALVE BLOCK ASSEMBLY 2 STATION CC/LS PROP DT 4 BOLT 1
5
Substitution parts will in no way affect the operation of the system pro ided that they are
installed as directed.
Item V01 – 2 Station Val e Block (44963D) may be substituted with:
Item Part Number Name Quantity
V01 44933D VALVE BLOCK ASSEM C4-BC 2-STATION CC/LS VARIABLE RATE 1
The 44933D is a direct replacement for the 44963D Both valve blocks function the same The
blocks are identifiable by the filter cap shape and by the part number stamped on the side
The A and B ports are opposite on each al e block so erify that the hoses are being
connected to the correct port. The raise lines always go to the “B” port and the lower lines
go to the “A” port.
44933D Val e Block Shown Alongside 44963D Val e Block
Filter Cap Part Number
(44933D) Filter Cap Part Number
(44963D)
6
Table 2 - 44865-06 - Hydraulics Fittings Kit Details
Item Part Number Name Quantity
Picture
F02 103312 MALE ADAPTER - 6MB 6MJ 2
F03 104586 TEE ADAPTER - 6FORXR 6MORT 4
F04 104886 MALE ADAPTER - 8MOR 8MB 2
F05 44917 MALE ADAPTER - 6MB-6MOR MACHINED ORB 8
F06 104885 TEE ADAPTER - 8FORXR 8MORT 2
F07 104590 90 DEG ADAPTER - 6MOR 6FORX90 4
F08 104369 PL G - 6MBP 2
F09 44928 ONE WAY ORIFICE INSERT - 0.047 4
F10 104592 O-RING HYD 3/8 IN FLAT FACE 2
F11 105184 ORIFICE INLINE 6 FLAT FACE 2
6 M B - 6 M OR X 90
SIZE IN
1/16
TH'S
GENDER: MALE
OR FEMALE
90
°
ANGLE
SWIVEL
TYPE
GENDER
SIZE
TYPE:
B - ORB
J - JIC
OR - FLAT
FACE
P - PIPE
Fitting Name
Example:
7
The parts that come with your UC4 System are shown below in their general installation
configuration.
Figure 2 – UC4+ Spray Height Control system Components
The use of dielectric grease is not recommended on any NORAC electrical connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of the
supplied Permatex Anti-seize grease to all threaded parts upon installation. Permatex Anti-
seize lubricant is preferred, but other similar anti-seize products may be used.
8
Figure 3 – Hydraulic Plumbing Schematic
IMPORTANT:
The factory CASE main lift accumulators must be charged to their recommended setting
for proper operation of the UC4+ Spray Height Control system.
E en on new sprayers, the charge pressure should be checked before proceeding with the
installation.
Autres manuels pour UC4+
41
Table des matières
Autres manuels Norac Pistolet à peinture
Norac
Norac UC4+ Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC4+ Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC4+ Manuel utilisateur
Norac
Norac Rogator 1286C Manuel utilisateur
Norac
Norac UC4 Total Control Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
