Nokia BH 604 - Headset - Binaural Manuel utilisateur

Nokia Bluetooth Stereo Headset

BH-604 User Guide

Issue 2 EN

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that this HS-96W product is in compliance with the

essential requirements and other relevant provisions of Directive 1999/5/EC.

A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/

declaration_of_conformity/.

Reproduction, transfer, distribution or storage of part or all of the contents in this document

in any form without the prior written permission of Nokia is prohibited.

Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other

product and company names mentioned herein may be trademarks or tradenames of their

respective owners.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Nokia operates a policy of ongoing development. Nokia reserves the right to make changes

and improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any

special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no

warranties of any kind, either express or implied, including, but not limited to, the implied

warranties of merchantability and fitness for a particular purpose, are made in relation to the

accuracy, reliability or contents of this document. Nokia reserves the right to revise this

document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer

nearest to you.

Unauthorized changes or modifications to this device may void the user's authority to operate

the equipment.

Export Controls

This device may contain commodities, technology or software subject to export laws and

regulations from the US and other countries. Diversion contrary to law is prohibited.

Issue 2 EN

Contents

English

Contents

1. Introduction ......................... 4

Bluetooth wireless technology.......... 4

2. Get started ........................... 5

Overview .................................................. 5

Chargers................................................... 5

Charge the battery................................ 5

Switch the headset on or off ............. 6

Switch on ............................................. 6

Switch off............................................. 6

Pair and connect the headset............ 7

Pair and connect the headset

with a mobile phone that has

a music player feature...................... 7

Pair and connect the headset

with a music player........................... 7

Disconnect the headset.................... 8

Reconnect the headset..................... 8

3. Basic use ............................... 9

Place the headset over the head....... 9

Adjust the volume................................. 9

Call handling........................................... 9

Listen to music..................................... 10

Clear the settings or

reset the headset................................. 10

4. Battery information ........... 11

Care and maintenance ........... 12

Introduction

1. Introduction

With the Nokia Bluetooth Stereo Headset BH-604 you can listen to music

from your compatible music player and make and receive hands-free calls

using your mobile phone. The music player can be the music player feature of

your mobile phone or a separate music device.

You can use the headset with compatible devices that support Bluetooth

wireless technology.

Read this user guide carefully before using the headset. Also read the user

guide for your mobile phone, which provides important safety and

maintenance information, and the user guide for your music device. Keep the

headset and its accessories out of reach of small children.

■Bluetooth wireless technology

Bluetooth wireless technology allows you to

connect compatible devices without cables.

A Bluetooth connection does not require

that the headset and the other device be in

line of sight, but the maximum distance

between the devices is 10 meters (30 feet).

The closer the devices are to each other, the

better is the performance. The optimal

operating range is shown in dark grey in the

picture. The connection is subject to

interference from distance and obstructions

(shown in light grey) or other electronic devices.

The headset is compliant with Bluetooth Specification 2.0 + EDR supporting

the following profiles: Headset Profile 1.1, Hands-Free Profile 1.5, Advanced

Audio Distribution Profile (A2DP) 1.0, and Audio Video Remote Control Profile

1.0. Check with the manufacturers of other devices to determine their

compatibility with this device.

There may be restrictions on using Bluetooth technology in some locations.

Check with your local authorities or service provider.

Get started

English

2. Get started

■Overview

The headset contains the following parts:

• Fast forward key (1)

• Microphone (2)

• Volume key (3)

• Multifunction key (4)

• Play/pause key (5)

• Rewind key (6)

• Indicator light (7)

• Charger connector (8)

Before you can start using the headset, you must charge the battery and pair

the headset with a compatible mobile phone.

Parts of the headset are magnetic. Metallic materials may be attracted to the

headset. Do not place credit cards or other magnetic storage media near the

headset, because information stored on them may be erased.

■Chargers

Check the model number of any charger before using it with this headset. The

headset is intended for use with the AC-4, AC-5, and DC-4 chargers.

Warning: Use chargers approved by Nokia for use with this particular

enhancement. The use of any other types may invalidate any approval or

warranty, and may be dangerous.

When you disconnect the power cord of any enhancement, grasp and pull the

plug, not the cord.

■Charge the battery

The headset has an internal, nonremovable, rechargeable battery. Do not

attempt to remove the battery from the headset, as you may damage the

headset.

Get started

1. Connect the charger to a wall outlet.

2. Connect the charger cable to the charger connector. The indicator light is

red while charging. It may take a while before charging starts. If charging

does not start, disconnect the charger, plug it in again, and retry.

Charging the battery fully takes less than 1 hour and 15 minutes.

3. When the battery is fully charged, the indicator light turns green.

Disconnect the charger from the headset and the wall outlet.

The fully charged battery has power for up to 18 hours of talk time, up to 2

weeks of standby time, or up to 19 hours of music playing time. However, the

times may vary with different compatible Bluetooth devices, usage settings,

usage styles, and environments.

When battery power is low, the headset beeps at regular intervals, and the

indicator light slowly flashes red. Recharge the battery.

■Switch the headset on or off

Switch on

To switch on, press and hold the multifunction key for about 2 seconds. The

headset beeps, and the green indicator light is briefly displayed.

When the headset tries to connect to the paired mobile phone or music player

that you have last used with it, the indicator light slowly flashes green. When

the headset is connected to a paired device and is ready for use, the indicator

light slowly flashes blue. If the headset has not been paired with a device, it

automatically enters the pairing mode (see “Pair and connect the headset,”

p. 7).

If you connect the headset to a device but do not use it for a while, switch off

the headset to save power.

Switch off

To switch off, press and hold the multifunction key for about 5 seconds. The

headset beeps, and the red indicator light is briefly displayed.

Get started

English

■Pair and connect the headset

Pair and connect the headset with a mobile phone that has a

music player feature

If your phone supports the A2DP Bluetooth profile and has a music player

feature, you can use the phone to make and receive calls and to play music

with the headset.

1. Ensure that your phone is switched on.

2. If the headset has not been previously paired with a device, switch on the

headset. The headset enters the pairing mode, and the indicator light starts

to flash blue quickly.

If the headset has been previously paired with another device, switch off

the headset, and press and hold the multifunction key until the indicator

light starts to flash blue quickly.

3. Activate the Bluetooth feature on the phone, and set it to search for

Bluetooth devices. See the user guide of your phone for instructions.

4. Select the headset from the list of found devices.

5. Enter the passcode 0000 to pair and connect the headset to your phone. In

some phones, you may need to make the connection separately after

pairing. You only need to pair the headset with your phone once.

If pairing is successful, the headset appears in the menu of the mobile phone

where you can view the currently paired Bluetooth devices.

When the headset is connected with your mobile phone and ready for use, the

indicator light of the headset slowly flashes blue.

Pair and connect the headset with a music player

If your phone does not support the A2DP Bluetooth profile, you can separately

pair the headset with the phone and a music player that supports this

Bluetooth profile.

If you have paired and connected the headset with your phone, disconnect the

headset from it before pairing the headset with a music player.

Get started

To pair the headset with a music player, follow the instructions in “Pair and

connect the headset with a mobile phone that has a music player feature,” p.

7. If your music player does not have a keypad, it may use the Bluetooth

passcode 0000 by default. If this is not the case, see the user guide of your

music player to change the default Bluetooth passcode to 0000.

If pairing is successful and the headset is connected with your music player,

the indicator light of the headset slowly flashes blue.

Disconnect the headset

To disconnect the headset from your device, switch off the headset, or

disconnect it in the Bluetooth menu of your device.

You do not need to delete pairing with the headset to disconnect it.

Reconnect the headset

To connect the headset to the phone or music player that you have last used

with it, switch on the headset, or make the connection in the Bluetooth menu

of your device.

In your device, you may be able to allow the headset to connect to it

automatically when the headset is switched on. To do this in Nokia devices,

change your paired device settings in the Bluetooth menu.

Basic use

English

3. Basic use

■Place the headset over the head

Place the headset over your head so that the speaker pads rest comfortably on

your ears.

Place the pad indicated with L on the left ear and the pad with R on the right

ear. Adjust the headband length for the best fit.

Warning: When using the headset your ability to hear outside sounds may be

affected. Do not use the headset where it can endanger your safety.

■Adjust the volume

To adjust the headset volume, slide the volume key forward to increase or

backward to decrease the volume during a call or while listening to music.

■Call handling

To make a call, use your mobile phone in the normal way when the headset is

connected to it.

If your phone supports redialing with the headset, press the multifunction key

twice quickly when no call is in progress.

If your phone supports voice dialing with the headset, press and hold the

multifunction key for about 2 seconds until the phone starts voice dialing, and

proceed as instructed in the user guide of the phone. Voice dialing cannot be

used during a call.

To answer a call, press the multifunction key, or use the keys of the phone. To

reject the call, press the multifunction key twice quickly.

To end a call, press the multifunction key, or use the keys of the phone.

To mute or unmute the microphone during a call, press the play/pause key.

To switch the call from the headset to a connected phone, press and hold the

play/pause key for about 2 seconds. To switch the call back to the headset,

press the multifunction key once.

Basic use

■Listen to music

To listen to music, connect the headset to a compatible music player such as a

mobile phone with a music player feature or other music device. The music

player must support the A2DP Bluetooth profile.

When the headset is connected to a phone but not to a separate music device,

the headset can only be used to make and receive calls if the phone does not

have a music player feature.

The available music functions depend on your music player.

If you receive or make a call while listening to music, the music is paused until

you end the call.

Warning: Listen to music at a moderate level. Continuous exposure to high

volume may damage your hearing.

To play a track, select it in the music player, and press the play/pause key.

To pause or resume playing, press the play/pause key. To stop playing, press

and hold the play/pause key for about 2 seconds.

To select the next track, press the fast forward key. To select the previous

track, press the rewind key. To scroll through the current track quickly during

playback, press and hold either key.

■Clear the settings or reset the headset

To clear the pairing and volume settings, switch off the headset, and press and

hold the multifunction key and slide the volume key forward until the

indicator light alternates red, green, and blue three times.

To reset the headset if it stops functioning, although it is charged, plug the

charger into the headset, and press and hold the multifunction key and slide

the volume key forward. The reset does not clear the headset settings.

Autres manuels pour BH 604 - Headset - Binaural

Table des matières

Langues :

Autres manuels Nokia casque

Nokia

Nokia HS-76W Manuel utilisateur

Nokia

Nokia BH-304 Manuel utilisateur

Nokia

Nokia BH-609 Manuel utilisateur

Nokia

Nokia BH 600 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-121 Manuel utilisateur

Nokia

Nokia WH-800 Manuel utilisateur

Nokia

Nokia BH-804 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-601 Manuel utilisateur

Nokia

Nokia BH-206 Manuel utilisateur

Nokia

Nokia HS 3W Manuel utilisateur

Nokia

Nokia BH-214 Manuel de service

Nokia

Nokia BH-106 Black Manuel utilisateur

Nokia

Nokia BH-700 Manuel utilisateur

Nokia

Nokia hs-13w - Wireless Image Headset Manuel utilisateur

Nokia

Nokia BH-207 Manuel utilisateur

Nokia

Nokia BH-222 Manuel utilisateur

Nokia

Nokia HS 26W - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-221 Manuel utilisateur

Nokia

Nokia BH-310 Manuel utilisateur

Nokia

Nokia BH-208 Manuel utilisateur

Nokia

Nokia HS-16 Manuel utilisateur

Nokia

Nokia BH-500 Manuel utilisateur

Nokia

Nokia BH-806 Manuel utilisateur

Nokia

Nokia HS HS 4W Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur