Step 2: Menu > Cong
The rst menu option is ‘Cong’. Pressing ‘Select’ on this
menu will take you into the Conguration Menu. Inside
this menu is the TPS, RPM, or TPS--RPM mode setting.
Use the ‘+ and ‘-’ buttons to navigate the menu. Once you
nd the setting you want to use, press ‘Select’ to save it.
Step 2A: Menu > Cong > Set Mode > TPS
Selecting ‘TPS’ in this menu will make the nitrous activate
when only the TPS voltage or WOT switch has been ac-
tivated. In this mode, the WinMax will act only as a WOT
switch.
**Using this setting will result in the nitrous being activat-
ed when at wide open throttle, regardless of the RPM**
Main Screen
This is the main screen of the window switch. If the win-
dow switch is set to activate in TPS and RPM, it will show
a ‘R’ for RPM and a ‘T’ for throttle percentage. If it’s in
TPS only, it will only show ‘T’ for throttle percentage. If it’s
in RPM only mode, it will show ‘R’ for RPM. In TPS--RPM
mode, it will show both throttle percentage and RPM.
Step 1: Entering Programming Mode
To enter programming mode, hold down all 3 buttons on
the controller. The ‘Stage’ and ‘Shift’ lights will begin to
ash, and the screen will say ‘Entering Programming’.
winmax window switch
part number 00-61001
INSTALLATION INSTRUCTIONS
WWW.NITROUSOUTLET.COM
important- All appropriate safety equipment (gloves, tools etc.) must be used during the installation of this product(s).
nitro dave’s llc accepts no responsibility for injuries resulting in the installation of any product(s). nitrous oxide is for off-road use only.
305 S. 28th street Waco, TX 76710 - TEL 254-848-4300
