You are required to understand and follow all safety instructions for proper and
safe use of NITROSET® tools. If you require any assistance, please contact your
jobsite safety foreman or call Nitroset, LLC. at 1.800.524.4649.
Always wear proper safety equipment including safety glasses, hard hats,
hearing protection, and gloves while operating the tool.
Manipulation or modification of the tool is not permitted. Any alteration of the
tool or use of non-genuine NITROSET® parts might impair function or cause
damage to the tool. Use of non-genuine parts will void any warranties.
Do not operate in an explosive or inflammable environment.
Never put your hand over the nosepiece of the tool.
Never point the tool at yourself or any bystanders.
Never press the nosepiece against any part of your body or anyone else’s body.
Only fasten into appropriate substrates. Use of inappropriate substrates may
cause injuries.
Never attempt to disassemble, modify or alter the fastener assemblies. Use only
the required length and type of pin (with correct adapter) for the application
(Refer to the Adapter Usage Table on Page 6).
Use only genuine NITROSET® Fasteners with the NITROSET® system. Use of
incorrect fasteners might lead to injury or damage to the tool.
Required Safety & Protective Equipment
Basic Instructions*
Safety Precautions
WWW.NITROSET.COM
Misuse of the Tool
*According to ANSI A10.3 and DOT (ref: EX2009040168) NITROSET® tools are not classified as a powder
actuated tool, thus no licensing is required.
3
CAUTION
Face shield
(recommended)
CAUTION
Wear hard
hats
CAUTION
Wear hearing
protection
CAUTION
Wear safety
gloves
CAUTION
Wear safety
glasses
