NITEforce LIVE 360 Green Manuel utilisateur
Copyright © 2023 - www.niteforce.mobi
LIVE 360 Green
Online LIVE 4G Trail Camera
User Manual
Declaration of Conformity to Directive 2014/53/EU
CE Caution:
Hereby the manufacturer declares that this 4G LTE Wireless
Trail Camera is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU. A copy of
the DOC, Declaration of Conformity to Directive 2014/53/EU,
may be obtained thru the local distributor.
- 2 -
PLEASE READ CAREFULLY BEFORE USING CAMERA
Thank you for Purchasing your NITEforce Trail Camera
The NITEforce LIVE 360 Green 4G is a high-quality digital
wireless trail camera. It has been precisely engineered and
tuned to provide you with optimal and consistent performance.
This camera will provide high quality digital pictures, videos and
Live online view from its location such as home, cabin and
business surveillance or animal monitoring for hunting and
research. It features a highly sensitive Passive Infra-Red (PIR)
motion sensor and numerous mobile APP setting options to tailor
the camera to your particular needs. Camera offers you high
quality product using many useful features.
Take photos & transmit over wireless network
See Live online view from location
Allow users to view photos, videos, Live view, monitor
camera status and modify parameter settings through
mobile APP
Camera has pre-installed Micro SD card. You only need to install
SIM card (without PIN code) and install mobile APP (Android or
- 3 -
iOS) to your phone. Find “UCon” APP from Google Play or Apple
store.
NOTE:
Each camera has a unique QR code ID sicker. You will need to
scan the code to APP inorder pair the camera and APP:
Choose Free 30 day trial as service package from the APP.
SPECIAL HANDLING PRECAUTIONS
The camera has been finely tuned. Avoid dropping and
physical shock. This camera is designed for typical weather
conditions (IP66). It is not waterproof for use underwater.
Carefully clean debris from camera lens, PIR, and LED platform.
Avoid use of cleaning solvents. Camera contains precise
electronic equipment. Do not attempt to open camera case
- 4 -
yourself. Fog condensation may form on lens and electrical
components when bringing into warm room from cold. To avoid
this, first place camera inside a sealed plastic bag before
bringing into warm room temperature. If condensation forms,
remove Micro SD card until camera is dry.
CELLULAR INFORMATION
This camera contains LTE 4G cellular (EU) module to transmit
images or Live view directly from the camera to your mobile
phone APP. Video clip sending or LIVE Online functions are not
working in 2G network area (too slow). Operator SIM card costs
and payment plans are between camera user and operator.
NOTE:
1) Remember disable (take off) the PIN code from the
SIM card, before inserting SIM card to camera.
2) Make sure that your SIM card Data Plan supports 4G
Live online transmission speed. Upload speed min
5MB/sec or higher.
- 5 -
Camera Overview
Camera has inbuild 8000mAh re-chargeable battery. Please
read section “Powering Camera”.
- 6 -
GETTING STARTED
Delivery Content
Trail Camera x 1
Solar Panel x 1
Pre-Installed Micro SD card x 1 (inside camera SD port)
USB-C cable x 1
Mounting Strap x 1
Mounting Plate with screws x 1
User Manual x 1
- 7 -
1. CHECK MICRO SD MEMORY CARD IS IN PORT
When push the Micro SD card down, you will hear “click” when
SD card is locking its port. Prefer “slow” read/write speed micro
SD cards ( SDHC/UHS ). The camera does not have any
internal memory for picture and video saving. Only Micro SD
card & UCon Cloud APP. Max compatible micro SD card size is
128GB.
- 8 -
2. INSERT Nano SIM CARD
Insert Nano SIM card as shown in below picture:
When push the SIM card down, you will hear “click” when SIM
card is locking its port. Make sure that your Nano SIM card Data
Plan supports 4G Live online transmission speed. Upload speed
min 5MB/sec or higher. Do not use slow 2G SIM cards.
Remember disable (take off) the PIN code from the
SIM card, before inserting SIM card to camera.
- 9 -
3. INSTAL UCon APP from Google Play or Apple Store
Search “UCon” and install the APP to your phone. After install
the UCon APP, register and login.
4. ADD YOUR CAMERA TO UCon APP
Click “Add a Device” Click “Setup 4G Device”
- 10 -
Turn ON camera power. When Blue Light is ON at camera, then
click “Next” from the APP. Finally Scan QR code from the
camera sticker.
Choose “FREE 30 days” Plan from the APP.
Table des matières
Langues :
Autres manuels NITEforce Caméra de repérage
