NiSi S6 Manuel utilisateur
The NiSi S6 filter holder system has been designed based on the patented technology of
the V6. This holder system allows the use of an integrated PRO CPL and two 150mm
filters without vignetting through 360 degrees of rotation. It also includes a rounded
screw-in thread with an external rotation wheel. This allows the individual use of a CPL,
round ND filter or UV filter.
English
Dedicated
circular filter
AdapterFilter holder
Clips
Knob
locking
wheel
Screw
Slot for adapter
Filter holder
Three
fixed points
Front Back
English
Adapter Installation
• Rotate the locking ring anticlockwise and make sure that the contractible cycle is at
widest bore.
• Install the adapter by inserting the four marked points into the groove of the lens hood.
• Rotate the locking ring clockwise and ensure that it firmly secured.
• Tighten the locking screw
External
rotation wheel
Lock screw
Contractible
cycle
Locking ring
for lens
Four
marked points
Front Back
Note: 1. The S6 filter holder system is suitable for filters 150mm in width and 2mm in
thickness.
2. The holders all made of aluminium which can be noisy while rotating.
3. The holder has been designed for the use of 1 circular and 2 square/rectangular
4. The holder has been tested to be durable between -149°F and 410°F.
filters. An additional clip may be added but this will result in some vignetting.
Watch the installation video : https://youtu.be/ZsTDXCEUNgQ
2.Place the two fixed points of the filter holder
onto the adapter securely and pull the knob.
3. Insert the square or rectangular filter into
the clip and test it before shooting.
1. Install the adapter onto the lens (please see
page 11).
Check that the holderis securely installed by rotating it to and fro.
Installation without a circular filter
English
13
1
2
Fixed
point
Knob
3
Installation with a circular filter
1. Place the circular filter on the front surface of
the adapter while turning anticlockwise with the
wheel held secure. Check that the filter is firmly
screwed in by rotating the filter clockwise. It
should rotate freely without coming loose.
4
4. Rotate the wheel and adjust the circular filter
to the desired configuration.
2. Install the adapter with the circular filter in
place (See page 11).
3. Place the two fixed points of the filter holder
onto the adapter securely and pull the knob.
Wheel
5. Insert the square or rectangular filter into
the clip and test it before shooting.
Check that the holderis securely installed by rotating it to and fro.
English
1
3
Fixed
point
Knob
2
5
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels NiSi Accessoires pour appareils photo
