Nippon FAS-BG LED BOX Manuel utilisateur

User’s Manual

FAS-BG LED BOX

PACKAGE CONTENTS

» Scanner unit

» User’s manual

» A/C power adapter (12V, 4.16A, DC)

» Amber filter board (included)

» Black plastic board (included)

» Gel tray w/o stopper (included)

SCANNER COMPONENTS

Front (Figure 1):

» Up/Down, Left/Right menu button

» USB 2.0 Port

» Scan button

» Cyan Light/White Light selection switch

» Power On/Off Button

» LCD display

» Upper lid

Back (Figure 2):

» DC power

» USB 2.0 port

» VGA port

Up/Down, Left/Right menu button

USB 2.0 Port

Scan button

Cyan Light/White Light selection switch

Power Button

LCD display

Upper lid

Figure 1

Figure 2

USB 2.0 port

DC power

Inside (Figure 3):

» Upper lid

» Lighting area

» Lid Sensor Figure 3

Upper lid

Lighting area

VGA Our Port

Lid Sensor

SETUP

1. Remove all tapes used to hold items in place for shipping.

2. Place FAS-BG LED BOX unit on ﬂat surface.

3. Connect power source – connect AC power adapter to back of unit then plug into electrical outlet.

4. Push power button.

5. Insert USB flash drive.

6. The Menu Mode icon will be displayed on the top left side of the display (Figure 4).

7. Place gel tray directly on the surface of the Lighting area (Figure 5).

8. Adjust the image condition and scan.

Menu icon

Figure 4 Figure 5

Lighting Area

Sample Tray

SCANNING FLUORESCENCE-STAINING GEL

1. In “Scanning Mode” , lift the lid to open the

scanner.

2. Slide the black plastic board into the groove of the

white backlight to block the white light on the lid*

(Figure 7).

3. Close the scanner lid.

4. Slide the Light Selection Switch on the front side of

the scanner to choose cyan light source for scanning

stained gel.

5. Set and adjust the desired image quality through the

Functional Menu if necessary (Please check

“Functional Descriptions” section for the details of all

functions).

6. Press SCAN button, green LED will ﬂash and

“CAPTURING” will be displayed on the screen. If

thermal printer had connected with FAS-BG LED BOX,

“Printing Yes/No” will be displayed on the screen. The

scanned image will automatically save to USB flash

drive.

Scanning of the gel sample is now complete.

(*: it is suggested to slide the black plastic board to block the white backlight on

the lid for fluorescent stained gel scanning.)

Figure 7

Slide the black plastic board to avoid the background light for

fluorescent stained gel scanning.

Black plastic board

White backlight

SCANNING WESTERN BLOT/COLORIMETRIC STAINED GEL:

1. In “Scanning Mode” , lift the lid to open scanner.

2. Place the sample to the center of the viewing area. Close the lid.

3. Slide the Light Selection Switch on the front side of the scanner to select the white light

source for stained gel scanning.

4. Set “White Epi” or “White Back Light” item through Functional Menu (Please check “LED

Lighting” of “Functional Descriptions” section for details of turn-on of “White Epi” or “White

Back Light” application ).

5. Adjust the desired image quality through the Functional Menu if necessary (Please check

“Functional Descriptions” section for the details of all functions).

6. Press SCAN button, green LED will ﬂash and “CAPTURING” will be displayed on the screen. If

thermal printer had connected with FAS-BG LED BOX, “Printing Yes/No” will be displayed on

the screen. The scanned image will automatically be saved to USB flash drive.

Scanning of the blot is now complete.

*: “White Back Light” mode is to scan the SDS-PAGE gel stained with coomassie blue and

preserved in a transparent media.

BROWSE SCANNED IMAGES/DELETE SCANNED IMAGES

Examine Scanned Images

a. When icon displays on top left corner of the screen, press “OK” to get into

functional options.

b. When “Scan Mode” icon is highlighted , press “OK” again to get into “Play Mode”.

c. The “Play Mode” icon will display on top left corner of screen. The captured

images can then be reviewed one by one by pressing right arrow button.

d. Press Upper/down arrow button, the image can be zoomed in/out and be removed

upward/downward and leftward/rightward.

Delete Scanned Images

a. When viewing the image that needs to be deleted, press “OK” to get into Function Descriptions II.

b. Press right arrow button to choose “Edit Mode”

c. Press up/down arrow button to choose “Delete”. Press right arrow button to select (yes/no)

to delete the file.

d. Press up/down arrow button to select “Yes”. Press “OK” to save the setting. The image is deleted.

INSTALLATION OF AMBER FILTER BOARD

FAS-BG LED BOX is equipped with an amber filter

board for cyan light protection and gel cutting

purposes. Open the lid and install the filter board

so the gel cutting task may be conducted.

1. Open the lid, cyan light will auto turn off

2. Lift the lid to its maximum open angle

3. Position the amber filter board with the hole

for hanging on lid in front (Figure 8).

4. Place the amber filter board onto the filter

board hanging tab so the filter board may

hang as shown in (Figure 9).

5. When hanging on the lid, make sure the two

small rods on the filter board are placed

closely against the lid.

6. The installation is completed. One may turn

on cyan LEDs by “Scan button” for further gel

cutting purpose.

Figure 8

Figure 9

Filter board hanging tab

Small rod

Amber Filter Board

DISPLAY SCANS ON Monitor or Projector

The display from the scanner can be displayed on a television rather than the built-in scanner

preview screen using the VGA port.

1. Set the television to VGA mode (see monitor documentation for details).

2. Connect the included VGA cable to the video port on the monitor.

3. Connect the other end of the cable to the VGA port on the back of the scanner.

4. Video output from the scanner can now be seen on the connected monitor including the full

menu interface.

Functional Menu: When image display on screen in yellow border, press “OK” button so the

functional icon will show on the left upper corner.

A. Function Descriptions I:

Scan Mode: The object is able to be scanned in this mode.

LED Lighting Mode: To select the white light application for

White Epi/White Back Light image scan, respectively (Note: this mode is available

only when white light application is selected.)

Exposure Mode: To adjust the exposure time frame in this mode.

BW/Color Switch Mode: To scan/display the image in B&W/B&W invert mode.

Default setting: monochrome (black & white)

Set Up Mode: To set up the following parameters:

a. LCD: Dark, Normal, Bright

b. Display: LCD, VGA

c. Video Output: 800x600, 1024x768

d. Filename: Setup/Filename

e. Save Format: TIF, JPG, BMP, (“JPG” is default setting)

f. Quick View: 1 sec, 2sec, 3 sec, off (“2sec” is default setting)

g. Slide Show Cycle: 2 sec, 3sec, 5 sec, 10 sec (“2sec” is default setting)

h. Power Save: 1 min, 3 min, 5 min, 10 min, off (“1 min” is default setting)

i. Language: English, Japanese

j. Date: setup date yyyy/mm/dd

k. Time: setup time hh/mm/ss

l. Reset: Yes, No. (Reset all current settings back to factory default)

m. About: product name, S/W version, F/W version, Update FW, CWD Version

Table des matières

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

Fujitsu

Fujitsu FI-4860C2 Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Fujitsu

Fujitsu fi-4860C Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Fujitsu

Fujitsu CardMinder Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur