Ninja Ninja Warrior NJ200 Manuel utilisateur

WARRIOR™

OWNER’S GUIDE

NJ200

NJ200_30_IB_ENG_110112.indd 1 11-01-12 11:01 AM

2TOLL FREE: 1-800-798-7398

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL

APPLIANCES, BASIC SAFETY

PRECAUTIONS SHOULD ALWAYS

BE FOLLOWED, INCLUDING THE

FOLLOWING:

READ ALL INSTRUCTIONS

BEFORE USING YOUR NINJA®

WARRIOR™.

POLARIZED PLUG

WARNING: To reduce the risk of

electric shock, this appliance has a

polarized plug (one blade is wider

than the other). This plug will ﬁt into

a polarized outlet only one way. If

the plug does not ﬁt fully into the

outlet, reverse the plug. If it still

does not ﬁt, contact a qualiﬁed

electrician to install the proper

outlet. DO NOT modify the plug in

any way.

1. This appliance should not be used

by children and care should be

taken when used near children.

2. To protect against electric shock,

DO NOT immerse cord, plug or any

part of the main unit in water or any

other liquids.

3. DO NOT let cord hang over edge

of table or counter, or touch hot

surfaces including the stove.

4. DO NOT operate any appliance with

a damaged cord or plug, or after the

appliance malfunctions, has been

dropped or damaged in any manner.

Return the appliance to EURO-PRO

Operating LLC for examination,

repair or adjustment.

5. Unplug appliance from outlet when

not in use, before putting on or

removing parts and before cleaning.

6. DO NOT place on or near a hot gas

or electric burner.

7. The use of accessory attachments,

not sold or recommended by

EURO-PRO Operating LLC may

cause ﬁre, electrical shock or risk of

personal injury.

8. Extreme caution must be used when

moving an appliance containing hot

food, water or other liquids.

9. When mixing liquids, especially

hot liquids, use the splash guard

or make small quantities at a time

to reduce spillage, spattering and

possibility of injury from burning.

10. Use this appliance on a stable work

surface away from water.

11. DO NOT remove the power head

before the chopping blades have

stopped turning.

12. CAUTION! Chopping blades are

sharp, handle with care. When

handling the chopping blades,

always hold by the shaft.

NJ200_30_IB_ENG_110112.indd 2 11-01-12 11:01 AM

www.ninjakitchen.com 3

25. The maximum rating is based on the

use of the chopping blade. Other

recommended attachments may

draw signiﬁcantly less power or

current.

26. DO NOT operate the appliance

empty.

27. If the appliance overheats, a thermal

switch will become activated and

shut off the motor. To reset, unplug

the appliance and let it cool down

for approximately 10 minutes before

using again.

NOTE: This unit has a short power

supply cord to reduce the risk resulting

from becoming entangled in or

tripping over a long cord. DO NOT USE

AN EXTENSION CORD WITH THIS

PRODUCT.

SAVE THESE

INSTRUCTIONS

13. DO NOT attempt to sharpen

blades.

14. DO NOT expose containers to

extreme temperature changes.

15. DO NOT use container if it is

cracked or chipped.

16. DO NOT use the appliance if

chopping blades are bent or

damaged.

17. Avoid contact with moving parts at

all times. Keep hands, hair, clothing

as well as spatulas and other

utensils away from moving/cutting

blades and containers during

operation to prevent risk of severe

personal injury and/or damage to

the appliance. A scraper may be

used but must be used only when

the appliance is not running.

18. Immediately release the On/Off

pulse button on the power head

in the event that the appliance

malfunctions during use.

19. DO NOT use outdoors.

20. DO NOT use appliance for other

than intended use.

21. DO NOT operate the appliance for

more than 2 minutes.

22. Make sure that the gear box is

securely attached to the processor

bowl before operating the

appliance.

23. Make sure that the power head is

securely attached to the gear box or

the blending shaft when using the

blending cup or the processor bowl.

24. To reduce the risk of injury, NEVER

place the chopping blades on the

gear box and power head without

ﬁrst putting the processor bowl

properly in place.

NJ200_30_IB_ENG_110112.indd 3 11-01-12 11:01 AM

4TOLL FREE: 1-800-798-7398

This manual covers model:

NJ200 30

TECHNICAL SPECIFICATIONS

Voltage: 120V., 60Hz.

Power: 350 Watts

Processor Bowl: 40 ounces (5 cups)

Blending Cup: 32 ounces (4 cups)

The Ninja® Warrior™ is equipped with a patent pending tri-blade system that can

effortlessly blend ice, fruits and vegetables into delicious, healthy smoothies. The Ninja®

Warrior™ features portable power options so you can blend in your own containers

or activate the 40 oz. processing bowl for even chopping! For best results, be sure to

carefully read all the instructions contained in the manual before using this appliance.

350 Watt Power Head

The 350 watt power head operates on 120V., 60Hz. electrical power. NEVER allow the

power head to become wet when plugged into an electrical outlet.

WARNING: The power head should never be immersed in water or any other liquid.

CAUTION: Make sure that the power head is unplugged from the electrical outlet and that

the blades have stopped turning before attaching or removing any accessory.

CAUTION: Blades are sharp! Use extreme caution when handling the blades. Always

hold them by the shaft. Do not attempt to sharpen blades.

IMPORTANT: Never run the appliance empty.

NJ200_30_IB_ENG_110112.indd 4 11-01-12 11:01 AM

www.ninjakitchen.com 5

Contents

Thank you for

purchasing

the Ninja®

Warrior™.

Getting Started ...................................................................................6

Using the Ninja® Warrior™ Blending Shaft Attachment .......7

Using the Ninja® Warrior™ Processing Bowl ... .........................8

Cleaning and Maintenance .............................................................9

Troubleshooting Guide ....................................................................9

Warranty ................................................................................................10

Registration ..........................................................................................11

FEATURES:

• Patent Pending Tri-Blade System - Crushes ice to snow!

• 40 oz. Processor Bowl - BPA Free

• 32 oz. Blending Cup - BPA Free

• Stainless steel blending shaft

• Extra long cord for portable power

• Dishwasher safe parts

NJ200_30_IB_ENG_110112.indd 5 11-01-12 11:01 AM

6TOLL FREE: 1-800-798-7398

Getting Started

f 40 oz. Processor Bowl with Non-Slip Base

g Blending Shaft (for 32 oz., Blending Cup)

h Storage Lid / Non-Slip Base

(for 32 oz., Blending Cup)

i Splash Guard (for 32 oz., Blending Cup)

j 32 oz. Blending Cup

k Power Cord

a Power Head

b Turbo Button

c Power Button

d Gear Box (for 40 oz. processor bowl)

e Ninja® 4-Blade (for 40 oz. processor

bowl)

NJ200_30_IB_ENG_110112.indd 6 11-01-12 11:01 AM

www.ninjakitchen.com 7

Fig. 1

CAUTION: Blades are sharp! Use extreme

caution when handling the blending

shaft.

IMPORTANT: Do not use the blending

shaft in the processing bowl.

1 To attach the blending shaft to the power

head, place the power head onto the

blending shaft and rotate to match the

arrows to lock in place. (Fig. 1)

2 Plug the electrical cord into an wall

outlet.

3 Attach the storage lid/non-slip base to

the bottom of the blending cup. (Fig. 2)

4 Place the food into the blending cup

and then place the splash guard on the

blending cup. Make sure that the splash

guard is ﬁrmly attached to the top of the

blending cup. (Fig. 3)

5 Insert the blending shaft through the

opening on the splash guard so that

the blades are resting on top of the

ingredients. (Fig. 4)

6 Press and hold the power button. The

blending shaft will continue to blend

as long as the power button is pressed.

Move blending shaft up and down at an

angle to combine ingredients.

7 Always release the power button before

removing the blending shaft from the

food, especially when blending hot food

or liquids. Always hold the power head

with your hand and never leave the

appliance unattended while in use.

NOTE: It is not recommended to operate

the appliance continuously for more than

2 minutes at a time.

8 To stop the appliance, release the power

button.

9 If you need a stronger burst of power,

press the turbo button.

10 When ﬁnished blending, unplug the

appliance from the outlet and remove the

blender shaft from the power head by

turning the power head clockwise.

CAUTION: Never remove the blending

shaft from the container while the unit is

plugged in.

Using the Ninja® Warrior™ Blending Shaft Attachment

Fig. 2

Use caution when

blending in a saucepan.

Fig. 3 Fig. 4

For best results move the blending

shaft up and down at an angle

while blending.

NJ200_30_IB_ENG_110112.indd 7 11-01-12 11:01 AM

8TOLL FREE: 1-800-798-7398

Fig. 6

Using the Ninja® Warrior™ Processing Bowl

Fig. 5

CAUTION: Blades are sharp! Use extreme

caution when handling the blades.

Always hold the blade assembly by the

shaft.

IMPORTANT: Do not use the blending

shaft in the processing bowl.

IMPORTANT: Never run the appliance

empty.

1 Place the processor bowl on a clean, dry,

level surface.

2 Holding the blade by the shaft, place it

onto the spindle pin inside the processor

bowl. (Fig. 5)

IMPORTANT: Place the blade inside the

container carefully as blades are sharp.

WARNING: DO NOT try to place the

blade onto the power head and then into

the processor bowl.

3 Add the ingredients to the processor

bowl. Make sure your total of ingredients

don’t exceed the highest measured

marking line on the side of the container.

IMPORTANT: Never add ingredients into

the processor bowl before placing the

blades in ﬁrst.

4 Place the gear box into position on top

of the processor bowl. (Fig. 6) Rotate to

lock. (Fig. 7)

5 Place the power head on top of the gear

box and turn it counter clockwise to

match the arrows and lock it into place.

(Fig. 8)

6 For best results when chopping, pulse

the power button.

7 To remove the power head, turn it

clockwise to unlock. Rotate the gear box

to unlock. Remove the gear box and the

chopping blades carefully. Then remove

the ingredients from the bowl.

IMPORTANT: It is not recommended to

operate the appliance continuously for

more than 2 minutes at a time.

In order to obtain a better

quality of chopping, operate

the unit by using a “Pulse”

method.

Fig. 7 Fig. 8

NJ200_30_IB_ENG_110112.indd 8 11-01-12 11:01 AM

www.ninjakitchen.com 9

Power

Head

Blending

Shaft

32 oz.

Blending

Cup

Splash

Guard

Storage

Lid

40 oz.

Bowl

Blade Set Gear

Box

Dishwasher

safe

top rack

ü ü

top rack

ü ü

top rack

Wipe clean

with a

damp cloth ü ü

Cleaning and Maintenance

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor Doesn’t Start

or Blades Don’t

Rotate.

The unit has overheated. Unplug and wait approximately

10 minutes before using again.

Make sure the gear box is securely on the processing

bowl.

Make sure the power head is securely placed on gear box

or the blending shaft.

Check that the plug is securely inserted into the electrical

outlet.

Check fuse or breaker. Replace fuse/reset breaker.

Food is Unevenly

Chopped.

Either you are chopping too much food at one time, or

the pieces are too large. Try cutting the food into smaller

pieces of even size or processing smaller amounts per

batch.

Food is Chopped Too

Fine or is Too

Watery.

The food has been over processed. Use quick pulses or

process for shorter time. Let blades stop completely

between pulses.

You Cannot Achieve

Snow From Solid Ice.

Do not use ice that has been sitting out or has started to

melt.

Troubleshooting Guide

To purchase replacement parts, please visit our website: www.ninjakitchen.com

or contact customer service: 1-800-798-7398.

CAUTION: Make sure that the power head is unplugged from power source before

inserting or removing any attachment and before cleaning.

Please call EURO-PRO Customer Service for any other servicing at 1 (800) 798-7398.

NJ200_30_IB_ENG_110112.indd 9 11-01-12 11:01 AM

10 TOLL FREE: 1-800-798-7398

Model

NJ200 30

ONE (1) YEAR LIMITED WARRANTY

EURO-PRO Operating LLC warrants this product to be free from material defects and

workmanship for a period of one (1) year from the date of purchase when utilized for

normal household use, subject to the following conditions, exclusions and exceptions.

The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or

replacement of the unit at our option. This Limited Warranty does not cover normal

wear of parts and does not apply to any unit that has been tampered with or used

for commercial purposes. This Limited Warranty does not cover damage caused by

misuse, abuse, negligent handling or damage due to faulty packaging or mishandling

in transit. This Limited Warranty does not cover damage or defects caused by or

resulting from damages from shipping or repairs, service or alteration to the product

or any of its parts, which have been performed by a repair person not authorized by

EURO-PRO Operating LLC.

If your appliance fails to operate properly while in use under normal household

conditions within the Limited Warranty period, you may return the complete appliance

and accessories with proof of purchase and date, freight prepaid. For Customer

Service support, call 1-800-798-7398 or visit our website www.ninjakitchen.com.

If the appliance is found by EURO-PRO Operating LLC to be defective, in EURO-PRO

Operating LLC’s sole discretion, we will repair or replace it free of charge. Proof of

purchase date and check made payable to EURO-PRO Operating LLC in the amount of

$11.95 to cover the cost of return shipping and handling must be included.*

This Limited Warranty is extended to the original purchaser of the unit and excludes

all other legal, implied and/or conventional warranties. The responsibility of EURO-

PRO Operating LLC if any, is limited to the speciﬁc obligations expressly assumed by

it under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC

liable for incidental or consequential damages to anyone of any nature whatsoever.

Some states do not permit the exclusion or limitation of incidental or consequential

damages, so the above may not apply to you.

This Limited Warranty gives you speciﬁc legal rights, and you may also have other

rights which vary from state to state or from province to province.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include

proof of purchase date and to attach tag to item before packing with your name,

complete address and phone number with a note giving purchase information, model

number and what you believe is the problem with the item. We recommend you

insure the package (as damage in shipping is not covered by your Limited Warranty).

Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are

constantly striving to improve our products, therefore the speciﬁcations contained

herein are subject to change without notice.

NJ200_30_IB_ENG_110112.indd 10 11-01-12 11:01 AM

Table des matières

Autres manuels Ninja Mixer

Ninja

Ninja AUTO-IQ PROFESSIONAL PLUS Manuel utilisateur

Ninja

Ninja BL740 Manuel utilisateur

Ninja

Ninja NJ100 Manuel utilisateur

Ninja

Ninja Master Prep Manuel utilisateur

Ninja

Ninja INSTALLATION, CARE & USE FOODi HB150C Manuel utilisateur

Ninja

Ninja Smart Screen Blender DUO Manuel utilisateur

Ninja

Ninja BL492ANZ Manuel utilisateur

Ninja

Ninja FOODI HB150ANZ Series Manuel utilisateur

Ninja

Ninja Single Serve System Pulse BL100 Manuel utilisateur

Ninja

Ninja Master Prep Advantage QB800NZ 30 Manuel utilisateur

Ninja

Ninja Ultima BL810Q Series Manuel utilisateur

Ninja

Ninja Foodi POWER NUTRI DUO SS101Q Manuel utilisateur

Ninja

Ninja BL740 Manuel utilisateur

Ninja

Ninja BL470 series Manuel utilisateur

Ninja

Ninja BL100C Manuel utilisateur

Ninja

Ninja BL610C Series Manuel utilisateur

Ninja

Ninja BN700 Series Manuel utilisateur

Ninja

Ninja Master Prep Professional QB1000C 30 Manuel utilisateur

Ninja

Ninja FOODI HB150SM Series Manuel utilisateur

Ninja

Ninja QB3000QUK series Manuel utilisateur

Ninja

Ninja BN750EU Manuel utilisateur

Ninja

Ninja QB3001 Series Manuel utilisateur

Ninja

Ninja BLENDER DUO Series Instructions d'installation

Ninja

Ninja NUTRI-BLENDER PLUS BN302Q Series Manuel utilisateur

Manuels Mixer populaires d'autres marques

ROTOR

ROTOR 1125.201 Manuel utilisateur

Braun

Braun Multiquick 5 Vario series Manuel utilisateur

ARENDO

ARENDO MIRA 305424 Manuel utilisateur

CHEF-BUILT

CHEF-BUILT CCB-3500 Manuel utilisateur

Viconte

Viconte VC-4406 Manuel utilisateur

Oster

Oster BLSTAB-CB0 Manuel utilisateur

HOFFEN

HOFFEN MC-3005 Manuel utilisateur

Black & Decker

Black & Decker BLC18750DM Manuel utilisateur

Sunbeam

Sunbeam 4182 Manuel utilisateur

Bialetti

Bialetti FMX35 Manuel utilisateur

Black & Decker

Black & Decker BL8000 Manuel utilisateur

Duronic

Duronic BL530 Manuel utilisateur

Exquisit

Exquisit MS 3002 wes Manuel utilisateur

Lumme

Lumme LU-KP1891A Manuel utilisateur

Binatone

Binatone HB-735 Manuel utilisateur

Moulinex

Moulinex LM936E10 Manuel utilisateur

Oster

Oster VERSA Manuel d'installation et d'exploitation

Vigan Mammoth

Vigan Mammoth TM4V1 Manuel utilisateur