Nilfisk-Advance SC351 Guide de l'utilisateur

Nilﬁsk A/S

Kornmarksvej 1

DK-2605 Brøndby

Denmark

Tel.: +45 43 23 40 50

Fax: +45 43 43 77 00

mail.com@nilﬁsk.com

www.nilﬁsk.com

If the machine has been used until the Red light illuminates on the battery level indicator on the machine, a full recharge of the batteries (10-12 hours) will be required. Failure to carry out this this

procedure may cause damage to the batteries. Charging the batteries after every use is recommended.

PLEASE ENSURE RED SOCKET IS LEFT DISCONNECTED AFTER RECHARGE IF THE MACHINE IS NOT TO BE USED ON A DAILY BASIS

Use and Maintenance

- SC351

ATTENTION! Do not use the machine before you have read and understood the User Manual

3. Always follow the dilution instruc-

tions on the label of the chemical

product used to prepare the

solution. The solution temperature

must not exceed 40°C and be none

foaming

2. Fill the tank with a solution suitable

for the work to be performed.

4. Place the brushes or the pad-holders

under the deck. Use the appropriate

brushes to clean the ﬂoor.

5. Turn the knob on one of the

indicated programs

1. Disconnect the battery charger cable

from the electrical main.

18. Park the machine with the recovery

tank cover open.

16. Clean the machine using a damp

cloth and where needed use a neu-

tral cleaning product.

17. Charge the batteries: Connect the

battery charger cable from the elec-

trical main.

13. Remove the brushes and clean

them.

11. Wash with clean water the recovery

tank.

12. Wash with clean water the vacuum

grid.

14. Take the squeegee off and remove

debris.

15. Check and clean the squeegee

blades.

8. Press the enabling push-button to-

gether with the brush levers for start-

ing ﬂoor cleaning. If solution applied

ﬂows outside the brush housing dur-

ing use, reduce the ﬂow of solution.

6. Press the enabling push-button to-

gether with the brush levers to en-

gage the brush/pad-holder and then

release it.

7 . Press the solution ﬂow control

switches as necessary, depending

on the type of cleaning to be

performed.

9. Turn the knob to “0” position to

switch off the machine.

10. At the end of the work. Empty the

recovery. Then empty the solution

tank.

All manuals and user guides at all-guides.com

Nilﬁsk A/S

Kornmarksvej 1

DK-2605 Brøndby

Denmark

Tel.: +45 43 23 40 50

Fax: +45 43 43 77 00

mail.com@nilﬁsk.com

www.nilﬁsk.com

The machine

doesn’t work

as it should?

The suction

doesn’t work

as it should?

The machine

doesn’t clean

as it should?

The brush

don’t work as they

should?

Troubleshooting

- SC351

ATTENTION! Do not use the machine before you have read and understood the Instructions for use manual

1Check if the fuse has triggered. 2Check if there are external materials

avoiding brush rotating.

1Check if the power cable is correctly

connected.

2Check if the battery is charged. 3Check if the fuse isn’t burnt out. 4Check if the programs selector is

damaged or has the right function

selected.

1Check if the suction hose is

correctly installed and cleaned.

2Open the recovery tank and check

if the vacuum grid and gasket are

cleaned.

3Check if squeegee blades are dam-

aged or dirty.

4Check if the fuse isn’t burnt out.

1Check if the programs selector has

the right function selected.

2Check if the solution valve is dirty/

clogged.

3Check if the solution reduction

ﬁtting is dirty/clogged.

4 Check brush/pad condition

All manuals and user guides at all-guides.com

Autres manuels pour SC351

Autres manuels Nilfisk-Advance Scrubber

Nilfisk-Advance

Nilfisk-Advance MX 307 H Mode d'emploi

Nilfisk-Advance

Nilfisk-Advance SR 1101 B Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Adgressor BR 1050S Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance 1300 LPG Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance BA 5321 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance SR 1601 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Advance Advenger 2800ST Series Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance SC401 Series Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Captor 4300 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance 908 7144 020 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Spintec 551 UH Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance SR 1000S B Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Cr 1100 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance SC4000 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance CA 551 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Retriever 350B Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance 56390916 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Viper Fang 15B Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance AX 651 Combi EDS Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Captor 5400 Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance MX 585 Mode d'emploi

Nilfisk-Advance

Nilfisk-Advance Advance SC400 Mode d’emploi

Nilfisk-Advance

Nilfisk-Advance BA 430S Manuel utilisateur

Nilfisk-Advance

Nilfisk-Advance Advance SC750 ST Manuel utilisateur

Manuels Scrubber populaires d'autres marques

Olympus

Olympus M200H Manuel utilisateur

Clarke

Clarke BEXT 100H Manuel d'installation et d'exploitation

JOHNY VAC

JOHNY VAC JVC70BCT Manuel utilisateur

RCm

RCm Elan Series Manuel

Kärcher

Kärcher B 120 W Manuel utilisateur

Truvox

Truvox Orbis MotorScrubber 20 Manuel utilisateur

Numatic

Numatic TTB 4045/100 Manuel utilisateur

U.S. Products

U.S. Products PEX 500-C-TICK Mode d'emploi

Mclennan

Mclennan C510 Manuel utilisateur

Tennant

Tennant T20 LPG Manuel utilisateur

Columbus

Columbus ARA 66 BM 100 Manuel utilisateur

Numatic

Numatic TTV 678G / 300T Manuel utilisateur

American-Lincoln

American-Lincoln 505-945 Manuel utilisateur

FIORENTINI

FIORENTINI ET 65-75 Manuel utilisateur

Floorpul

Floorpul ruby 48 blt Guide de l'utilisateur

Onyx

Onyx RX-34 Manuel utilisateur

Dustbane

Dustbane Hurricane 400 Manuel utilisateur

Sana

Sana EUJ-702 Manuel utilisateur