Nikon CoolPix S8200 Manuel utilisateur

Nikon

DIGITAL CAMERA

COOLPIX $8200

Reference Manual

Features That Can Be Set Using the Multi Selector

Using the Self-timer

Tile camera is equipped with a self-timer that releases tile shutter ten or two

seconds after you press tile shutter-release Button. Tile self-timer is useful when

you want to be in tile picture you are taking, and when you want to avoid tile

effects of camera shake that occur when you press tile shutter-release Button.

When using tile self-timer, use of a tripod is recommended. Set Vibration

reduction to Off in tile setup menu (_ 94) when using a tripod to stabilize tile

camera during shooting.

1 Press the multi selector _ (_t__)self-timer). °@°

2Use the multi selector to select los or 2s and

press the _) button.

• 10s (ten seconds): Use on important occasions, such as

weddings.

•2s (two seconds): Use to prevent camera shake.

• When _ isselected, the camera uses face detection to

detect a human face, and then automatically releases

the shutter when a smile isdetected ([_ 61).

• When the shooting mode is set to Pet portrait scene mode, I_i (pet portrait auto

release) is displayed; when set to continuous shooting mode, _ (smile timer

continuous) is displayed ([_ 43, 61).The self-timer settings lOs and 2s cannot be

used.

• The mode selected for self-timer is displayed.

• Ifa setting is not applied by pressing the_) button within a few seconds, the

selection will be canceled.

3Framethe pictureand pressthe [ l, 1

shutter-release button halfway.

•Focusandexposurew,,,beset

Features That Can Be Set Using the Multi Selector

4 Press the shutter-release button the

rest of the way down.

• The self timer starts and the number of

seconds remaining before the shutter is

released is displayed in the monitor The serf

timer [amp blinks white the timer is counting

down About one second before the shutter

is released, the [amp stops blinking and glows

steadily

• When the shutter is rdeased the self timer

will be set to OFF.

• To stop the timer before a picture is taken,

press the shutter rdease button again

_? ,v II_ "

.....

Features That Can Be Set Using the Multi Selector

Using the Smile Timer, Smile Timer Continuous

When tile camera detects a person's smile, it automatically releases tile shutter;

you do not need to press the shutter-release button.

• Smile timer: Images are captured one at a time. This feature can be used when

shooting mode (_ 24) is set to I_1(auto) mode or the Portrait or Night

portrait scene mode (_ 39).

• Smile timer continuous: Acontinuous series of images iscaptured. This feature

(:an be used when shooting mode (_ 24) is set to continuous shooting mode

(1_ 50).

1 Press the multi selector _ (xt__)self-timer).

•To adjustsettingsfor creativeslider,exposure _

compensation,or itemsin the shooting menu, adjust _[_thesettings beforepressing_t._).

Smile timer

Smile timer continuous

Features That Can Be Set Using the Multi Selector

3Frame the picture and wait for the subject to _ ,_

smile. _

• When the camera detects a human face, a double

border (focus area) is displayed around that face. When

the camera has focused on that face, the double

border will turn green for a moment and focus is

locked.

• Up to three faces can be detected. When the camera detects more than one face, the

double border (focus area) is displayed around the face closest to the center of the

frame, and single borders around the others.

• When using smile timer:

- If the camera detects that the face framed by the double border is smiling, the

shutter is automatically released.

- After the camera releases the shutter, it will continue to detect faces and smiles, and

will release the shutter again if it detects a smiling face.

- To end automatic shooting by smile detection, set the smile timer to OFF.

• When using smile timer continuous:

- The _ icon is displayed in the shooting screen.

- If the camera detects that the face framed by the double border is smiling, the

shutter is automatically released and up to five images are captured at a rate of

about 3 fps.

- The camera will continue to detect faces and smiles until continuous shooting

ends, and will capture images continuously again if it detects a smiling face. To

finish, set the smile continuous timer to OFF.

Features That Can Be Set Using the Multi Selector

_1_ Notes About the Smile Timer, Smile Timer Continuous

• Digital zoom cannot be used,

• Under some shooting conditions, the camera may be unable to detect faces or detect smiles,

• See "Notes About Face Detection" (_ 76) for more information,

• This function cannot be used simultaneously with certain functions, See "Features That Cannot Be

Used Simultaneously" (_ 73) for more information.

[] Auto Power Off When Using Smile Timer, Smile Timer Continuous

The auto off function (_ 95) is activated and the camera turns off when either of the situations

indicated below persists and no other operations are performed.

• The camera does not detect any faces.

• The camera detected a face, but cannot detect a smile.

[] When the Self-timer Lamp Blinks

The self timer lamp blinks slowly when the camera detects a _ce, and blinks quickly immediately

after the shutter is released.

[] Releasing the Shutter Manually

Pictures can also be taken by pressing the shutter release button, The camera focuses on the subject

in the center of the frame when faces are not detected.

[] More Information

See "Autofocus" (_ 29) for more informatkm.

Features That Can Be Set Using the Multi Selector

t£2

Using Macro Mode

When using macro mode, tile camera can focus on objects as close as 1 cm

(0.4 in.) from the front of the lens.

Thisfeature is usefulwhen taking close-up pictures of flowers and other small subjects.

1 Press the multi selector • (_ macro mode).

2Use the multi selector to select ON and press ......

the _ button.

• The macro mode icon (_) is displayed.

• If a setting is not applied by pressing the 000000°_)button

within a few seconds, the selection will be canceled.

3Rotatethe zoom control to the zoom position __

at which _ and the zoom indicator glow green.

• How close you can be to the subject when shooting

depends on the zoom ratio.

When the zoom is set to a position where _ and the

zoom indicator glow green, the camera can focus on subjects as close as 10 cm (4 in.)

from the lens.

When the zoom ratio is wider than/'_, the camera can focus on subjects as close as

I cm (0.4 in.) from the lens.

_1_ Notes About Using the Flash

The flash may be unable to light entire subject at distances of less than 50 cm (1 ft 8 in.) from the camera.

[] Autofocus

When using macro mode in I_1 (auto) mode or continuous shooting mode, you can focus without

pressing the shutter release button halfway by setting Autofocus mode (_ 38) in the shooting

menu (_ 37) to Full-time AF.

When using other shooting modes, Full-time AF is turned on automatically when macro mode is

turned on (except when using _ (pet portrait)).

You may hear the sound of the camera focusing.

[] The Macro Mode Setting

• Macro mode cannot be used when using certain shooting modes. See "Default Settings" (_ 69)

for more information.

• I_1 (auto) mode and continuous shooting mode share the same macro mode setting. When using

I_1 (auto) mode or continuous shooting mode, the macro mode setting is saved in the camera's

memory even if the camera is turned off.

Features That Can Be Set Using the Multi Selector

Adjusting Brightness (Exposure Compensation), Vividness,

and Hue (Creative Slider)

When tile shooting mode (_ 24) is set to I_ (auto) mode (_ 36) or continuous

shooting mode (_ SO),use tile creative slider to adjust brightness (exposure

compensation), vividness, and hue for taking pictures.

Operating the Creative Slider

1 Press the multi selector i_ (if-M). °@°

3Adjust the brightness, vividness, or hue. Slider

• Usethe mufti selectorasexplainedbelow.

- AV:The slidermoves.Theeffectcan beadjusted _

while confirming the resultsin the monitor.The

effectcanalsobeadjusted by rotating the mufti

selector.

- • •: Switchesbetween brightness(exposure

compensation),vividness,and hue.

• Formore information oneachitem, seethe following:

- "Adjusting Brightness(ExposureCompensation)"(_ 67)

- "AdjustingVividness(SaturationAdJustment)"(I_ 67)

- "AdJustingHue(WhiteBalanceAdjustment)" (_ 67)

• To turn offthe effectsofthe creativeslider,press• or • to selectI'_, and pressthe

_) button.

Features That Can Be Set Using the Multi Selector

4 When adjustment is complete, press _ or i_ I _l

to select [] and press the _) button. ] ]

•If the _) button (except when [] is selected) or the

shutter-release button is pressed in step 3,the selected

amount of effect is applied. When the effect is applied,

the camera returns to the shooting screen.

• If brightness is adjusted, _ and the compensation

value are displayed.

• If vividness is adjusted, (_ is displayed.

• If hue is adjusted, _ is displayed.

5Press the shutter-release button to take a picture.

[] Creative Slider Settings

I_1 (auto) mode and continuous shooting mode share the same settings for brightness (exposure

compensation), vividness, and hue; these settings are saved in the camera's memory even when the

camera is turned off,

Features That Can Be Set Using the Multi Selector

Adjusting Brightness (Exposure Compensation)

Adjust tile overall brightness of the image.

• To make the subject brighter, move the slider

toward "+."

• To make the subject darker, move the slider toward

Slider

Exposure Histogram

compensation

value

[] Using the Histogram

A histogram isa graph showing the distribution of tones in the image, Useasa guide when using

exposure compensation and shooting without the flash.

• The horizontal axis corresponds to pixel brightness, with dark tones to the left and bright tones to

the right. The vertical axis shows the number of pixds,

• Increasing exposure compensation shifts tone distribution to the right, and decreasing it shifts

tone distribution to the left,

Adjusting Vividness (Saturation Adjustment)

Adjust tile overall vividness of the image.

• Vividness increases asthe slider is moved up.

Vividness decreases as the slider is moved down.

Slider

Adjusting Hue (White Balance Adjustment)

Adjust tile overall hue of the image.

• The overall image becomes more reddish as the

slider is moved up.The overall image becomes more

bluish as the slider is moved down.

Slider

_1_ Notes About White Balance Adjustment

When hue is adjusted using the creative slider, White balance in the shooting menu (_ 37)

cannot be set, To set White balance, select [] in the creative slider setting screen to reset the

brightness, vividness, and hue, 67

Autres manuels pour CoolPix S8200

Table des matières

Autres manuels Nikon Appareil photo numérique

Nikon

Nikon 1155EB Manuel utilisateur

Nikon

Nikon D3100 Manuel utilisateur

Nikon

Nikon COOLPIX 5200 Manuel utilisateur

Nikon

Nikon COOLPIX 8800 Manuel utilisateur

Nikon

Nikon Coolpix L12 Manuel utilisateur

Nikon

Nikon COOLPIX 700 Manuel utilisateur

Nikon

Nikon COOLPIX 4300 Manuel utilisateur

Nikon

Nikon FAA28051 Mode d'emploi

Nikon

Nikon 25432 Manuel utilisateur

Nikon

Nikon CoolPix S560 Manuel utilisateur

Nikon

Nikon Digital Camera Manuel utilisateur

Nikon

Nikon COOLPIX 5400 Guide de démarrage rapide

Nikon

Nikon CoolPix S550 Guide de l'utilisateur

Nikon

Nikon Z 7II Manuel d'utilisation et d'entretien

Nikon

Nikon KEYMISSION 170 Manuel utilisateur

Nikon

Nikon D3100 Manuel utilisateur

Nikon

Nikon CoolPix S100 Manuel utilisateur

Nikon

Nikon D5200 Manuel utilisateur

Nikon

Nikon D70 Manuel utilisateur

Nikon

Nikon D5 Professional Manuel utilisateur

Nikon

Nikon E5600 Manuel utilisateur

Nikon

Nikon Coolpix P5000 Manuel utilisateur

Nikon

Nikon FM3A Manuel utilisateur

Nikon

Nikon D7000 Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur

Samsung

Samsung SCC-C4253 Manuel utilisateur