3.Local System Login
Rear Panel
4.Web Login
If the plug-ins cannot be loaded, you need to set IE as follows:
Tools —>Internet Options—>Custom Level—>ActiveX controls and
plug-ins, to enable all, and click OK.
Enter the IP address of the recorder in the browser address bar, and
connect. After a successful connection, it will pop up an input box as
shown below.
Enter the user name and password The factory default administrator
user name is admin, password is 12345.
Interface Name Interface Function
VGA VGA output
1080P HD output
RJ45 Ethernet
USB 2.0 USB storage device and mouse
DC-12V Power input
5. Connection with the IPC
2. Hard Disk Installation
Compatible with 2.5-inch and 3.5-inch hard disks, with maximum capacity
of 4TB.
Take the following model as an example
1. Product Appearance Introduction
Item Name Function
1Power Indicator Steady light when the power connection
works.
2HDD Indicator Steady light when the HDD works.
3Network Indicator Steady or flashing light when the network
connection works.
After the normal startup, click the right mouse button and there will be a
login dialogue. Then enters the user name and password in the input box.
In the factory default state, the user is admin, and the password is 12345.
Admin is the default high-privileged user.
Note: Make sure the NVR and IPC are in the same LAN, but different
IP address.
2 ↑4 ↑
3 ↓Select search to the camera
5 →
1 Right-click in the main interface.
1080P
HDD
② Align the screw holes on the hard
disk with screw holes on the base plate.
① Loosen the screws on the base
plate.
③ Turn the device and use screws
to tighten the hard disk to the
bottom.
⑤ Align the top cover with the
base plate and gently close.
⑥ Use screws to tighten the top
cover to the base plate.
HDD
④ Plug in the hard drive cable
and power cable.
Top Cover
1
2
3
Take the following model as an example:
The appearance of products, including buttons, interfaces
and layout, are for reference only, and the actual delivered
goods shall prevail.
Item Name Function
1Power Indicator Steady light when the power connection
works.
2HDD Indicator Steady light when the HDD works.
3Network Indicator Steady or flashing light when the network
connection works.
Item Name Function
1Power Indicator Steady light when the power connection
works.
2HDD Indicator Steady light when the HDD works.
3Network Indicator Steady or flashing light when the network
connection works.
