NexWatch PW-5000 Manuel utilisateur

PW-5000

Enclosure

Installation Manual

Part Number: PW5K2ENC1

PW5K2ENC2

TD1151rev1101

PW-5000 Enclosure PW5K2ENC1 & PW5K2ENC2 3Installation Guide

TD1151 rev1101

Contents

Warnings and Cautions ................................................................................... 4

Disclaimer........................................................................................................... 6

Product Liability; Mutual Indemnification................................................................ 6

Unpacking Procedure ........................................................................................... 6

CAUTION ........................................................................................................... 6

Shipping Instructions ............................................................................................ 7

Limited Warranty ................................................................................................. 7

Confidentiality ..................................................................................................... 8

PW-5000 Enclosure...................................................................................... 9

Description .......................................................................................................... 9

Dimensions ....................................................................................................... 10

Conduit Knockouts ............................................................................................. 10

Power Supply ..................................................................................................... 10

Maintenance ..................................................................................................... 10

Installation Instructions ....................................................................................... 10

Installation Diagram .......................................................................................... 11

UL1076 Setup ............................................................................................. 12

PC Minimum Requirements ................................................................................. 12

Peripheral Hardware Requirements...................................................................... 12

Operating System Requirements ......................................................................... 12

Software Packages Required ............................................................................... 12

Receiving Unit minimum configuration ................................................................ 12

Priority of incoming signals for UL1076 ............................................................... 12

Other UL1076 Notes .........................................................................................13

Procedures ........................................................................................................ 13

Second PC Installation ....................................................................................... 14

Enterprise Manager Setup .................................................................................. 14

Pre-Redundancy Verification: ............................................................................... 15

DTS Package Verification .................................................................................... 15

Interim Steps Before Full Redundancy Verification ................................................. 15

Redundant Test Examples ................................................................................... 16

Dimensions ....................................................................................................... 16

Conduit Knockouts ............................................................................................. 17

Power Supply Enclosure ...................................................................................... 17

Installation Diagram .......................................................................................... 17

Dimensions ....................................................................................................... 17

Installation Instructions ...................................................................................... 18

Cable Specifications .................................................................................. 19

NexWatch Cable Part Numbers ................................................................ 20

NOTES ........................................................................................................ 21

4 PW-5000 Enclosure PW5K2ENC1 & PW5K2ENC2Installation Guide

TD1151 rev1101

Warnings and Cautions

WARNING

Before installation, TURN OFF the external circuit breaker which supplies power to the

system.

Before connecting the device to the power supply, verify that the output voltage is within

specifications of the power supply.

Do not apply power to the system until after the installation has been completed.

Personalinjuryor deathcould occur,and the equipment could be damaged beyond repair

if this precaution is not observed!

WARNING

Fire Safety and Liability Notice

Never connect card readers to any critical entry, exit door, barrier, elevator or gate without

providing an alternative exit in accordance with all fire and life safety codes pertinent to

the installation.These fire and safety codes vary from city to city and you must get

approval from local fire officials whenever using an electronic product to control a door or

other barrier. Use of egress buttons, for example, may be illegal in some cities. In most

applications, single action exit without prior knowledge of what to do is a life safety

requirement.Always make certain that any required approvals are obtained in writing.DO

NOT ACCEPTVERBAL APPROVALS,THEY ARE NOTVALID.

NexWatch never recommends using the PW-5000 or related products as a primary warning

or monitoring system. Primary warning or monitoring systems should always meet local

fire and safety code requirements.The installer must also test the system on a regular

basis by instructing the end user in appropriate daily testing procedures.Failure to test a

system regularly could make installer liable for damages to the end user if a problem

occurs.

WARNING

EARTH groundall enclosures, for proper installation.

EARTH groundcan beobtained through the power supply or by grounding the cabinet,

BUTNOTBOTH!

WARNING

Use suppressors on all door strikes.Use S-4 suppressors for installation.NexWatch

recommends only DC strikes.

The information in this document is subject to change without notice.

PW-5000 Enclosure PW5K2ENC1 & PW5K2ENC2 5Installation Guide

TD1151 rev1101

CAUTION

If any damage to the shipment is noticed, a claim must be filed with the responsible

commercialcarrier.

CAUTION

Electro-static discharge can damage CMOS integrated circuits and modules.

To prevent damage always follow these procedures:

Use static shield packaging and containers to transport all electronic components,

including completed reader assemblies.

Handle all ESD sensitive components at an approved static controlled workstation.These

workstations consist of a desk mat, floor mat and an ESD wrist strap.Workstations are

available from various vendors.

NOTICE

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules when wired using metal conduit for the

cabling external to the enclosure.These limits are designed to provide reasonable

protectionagainst harmful interference when the equipment is operated in a commercial

environment.This equipment generates,uses,and can radiateradio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause

harmfulinterference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference that will require correction at the users ex-

pense.

NOTICE

This document and the data in it shall not be duplicated, used or disclosed to others for

procurement or manufacture, except as authorized by and with the written permission of

NexWatch, Inc.The information contained in this document or in the product itself is

considered the exclusive property and trade secrets of NexWatch.Copyright laws of the

United States protect all information in this document or in the software product itself.

NOTICE

Any use of this product is subject to the terms and acceptance of the NexWatch Software

Agreement.Please request a copy from NexWatch, and review the agreement carefully.

6 PW-5000 Enclosure PW5K2ENC1 & PW5K2ENC2Installation Guide

TD1151 rev1101

Disclaimer

Product Liability; Mutual Indemnification

In the event that a Customer receives a claim that a Product or any component thereof

has caused personal injury or damage to property of others, Customer shall immediately

notify NexWatch in writing of all such claims.NexWatch shall defend or settle such claims

and shall indemnify and hold Customer harmless for any costs or damages including

reasonable attorneys’ fees which Customer may be required to pay as a result of the

defective Product or the negligence of NexWatch, its agents, or its employees.

Customer shall hold harmless and indemnify NexWatch from and against all claims,

demands, losses and liability arising out of damage to property or injury to persons

occasioned by or in connection with the acts or omissions of Customer and its agents and

employees, and from and against all claims, demands, losses and liability for costs of

fees,including reasonableattorneys’ fees,in connectiontherewith.

Unpacking Procedure

CAUTION

If any damage to the shipment is noticed before unpacking, a claim must be filed with the

commercialcarrier.

All containers should be opened and unpacked carefully in order to prevent damage to the

contents.

The following steps are used to unpack equipment in preparation for installation:

1. Open the container and remove the unit(s) and all packing material. Retain the

container and all packing materials. They may be used again for reshipment

of the equipment, if needed.

2.Inspect the contents for shortage. If items are missing, contact the order entry

departmentat800-227-1667Option-2.

3.Visually check contents.If damage is discovered, perform the following:

If shipping caused damage to the unit, a claim must be filed with the

commercialcarrier.

If any other defect is apparent, call 800-227-1667 Option-2 for a return authorization.

PW-5000 Enclosure PW5K2ENC1 & PW5K2ENC2 7Installation Guide

TD1151 rev1101

Shipping Instructions

To ship equipment back to NexWatch:

1.Contactthe customer servicedepartmentbefore returning equipment at 800-227-1667

Option-2. Pleasehave the following available when calling:

• A description of the problem or reason for returning the equipment.

• Original purchase order number, invoice number and if the unit is under warranty.

• A new purchase order number if the unit is not under warranty

2.From the customer service department, obtain the Return Authorization Number (RMA).

3.Show the RMA number on all packages shipped.Packages, which are not marked with

an RMA number will be refused at the factory and returned COD.

4.Carefully pack the equipment for shipment. Use the original packing material whenever

possible.

Limited Warranty

All Products sold or licensed by NexWatch include a warranty registration card which

must be completed and returned to NexWatch by or on behalf of the end user in order for

NexWatch to provide warranty service, repair, credit or exchange. All warranty work shall

be handled through Customer which shall notify NexWatch and apply for a Return Mer-

chandise Authorization (RMA) number prior to returning any Product for service, repair,

credit or exchange. NexWatch warrants that its Products shall be free from defects in

materials and workmanship for a period of two years from date of shipment of the Product

toCustomer.ThewarrantyonTerminals,Printers,CommunicationsProducts and Upgrade

kits is 90 days from date of shipment. Satisfaction of this warranty shall be limited to

repair or replacement of Products which are defective or defective under normal use.

NexWatch’warranty shall not extend to any Product which, upon examination, is deter-

mined to be defective as a result of misuse, improper storage, incorrect installation,

operationor maintenance,alteration, modification,accident orunusual deteriorationof the

Product due to physical environments in excess of the limits set forth in Product manuals.

THEREARE NOWARRANTIESWHICHEXTEND BEYONDTHIS PROVISION.THIS

WARRANTY IS IN LIEU OF ALL OTHERWARRANTIES WHETHER EXPRESS, IMPLIED

ORSTATUTORY,INCLUDINGIMPLIEDWARRANTIESOF MERCHANTABILITYOR

FITNESSFOR ANY PARTICULARPURPOSE.NO REPRESENTATIONORWARRANTY

OFTHE DISTRIBUTOR SHALL EXTENDTHE LIABILITY OR RESPONSIBILITY OFTHE

MANUFACTURER BEYONDTHETERMS OFTHIS PROVISION.IN NO EVENT SHALL

NEXWATCH BE LIABLE FOR ANY RE-PROCUREMENT COSTS, LOSS OF PROFITS,

LOSS OF USE, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGESTO ANY

PERSONRESULTING FROMTHE USE OF NEXWATCH’PRODUCTS.

8 PW-5000 Enclosure PW5K2ENC1 & PW5K2ENC2Installation Guide

TD1151 rev1101

Confidentiality

All software, drawings, diagrams, specifications, catalogs, literature, manuals and other

materials furnished by NexWatch relating to the design, use and service of Products shall

remainconfidential andshall constitute proprietary rightsof NexWatch,andCustomer

agrees to treat such information as confidential. Customer shall acquire no rights in the

design of Products or the related materials except to use such information solely for the

purpose of and only during the time it sells Products. Customer shall not copy the design

of any Products or use or cause to be used any Product design or related materials for its

own benefit or for the benefit of any other party.The covenants contained in this section

shall remain effective throughout the term of this Agreement and thereafter unless specifi-

cally waived by NexWatch in writing.

PW-5000 Enclosure PW5K2ENC1 & PW5K2ENC2 9Installation Guide

TD1151 rev1101

PW-5000 Enclosure

Description

The PW-5000 system is designed for maximum efficient use of wall space through the

use of a secure metal cabinet (PW5K2ENC1/PW5K2ENC2) that can hold up to nine

modules,a 4amp powersupply (PW5K2E1PS)and aself-contained replaceable

backupbattery.

Typically,one of the nine modules can be an intelligent controller(PW55K1IC/PW3K1IC).

The remaining eight slots can be used and configured in a variety of combinations of

readers,

supervised inputs, relay outputs and other specialized modules to customize the system

for the individual site.

ThePW5K2ENC1/PW5K2ENC2 canbe configuredin anycombination ofthe PW5K1IC,

PW3K1IC, PW5K1IN, PW5K1OUT,PW5K1R2 andPW5K1R1.An optional daisy chain

cable(PW5K1DCC) provides anRS-485 communicationand power busbetween the

ninemodules.

PW5K2ENC1 / PW5K2ENC2

10 PW-5000 Enclosure PW5K2ENC1 & PW5K2ENC2Installation Guide

TD1151 rev1101

Dimensions ENC1 ENC2

Height: 13.9" [0.353 m] 13.9" [0.353 m]

Width: 17" [0.4318 m] 18.9" [0.48006 m]

Depth: 9" [0.2286 m] 9" [0.2286 m]

Metal thickness: .05" [1.27 mm]

Color:AutumnWhite

Installation holes: Four hangers in a rectangular pattern 12.1” [0.30734 m] H x 16"

[0.40640m]W

Conduit Knockouts

½" [0.0127 m] 2" [0.05080 m]

Back: 9 2

Top: 9 2

Right Side: 2 1

Left Side: 2 1

Power Supply

Use PW5K2E1PS or other approved power supply.(See Installation Manual for details).

Maintenance

Oil lock once per year.If battery backup is used, change battery every 2 to 2 1/2 years.

Installation Instructions

1. Measure and install four mounting screws with heads smaller than .4" [0.01016 m]

using proper techniques for the material on which the PW-5000 is being mounted.Use

a rectangular screw pattern 12.1" [0.30734 m] H x 16" [0.40640 m]W.Leave the

screws exposed approximately 1/2" [0.0127 m].

2. Open the door of the enclosure and place the hanging slots over the mounting screws.

Push the enclosure over the mounting screws and allow the screws to slide into the

slots. Finish tightening the mounting screws to securely hold the enclosure.

3. Run all appropriate wiring to the case. Mark each wire as to the panel, location and

input type. All cable shields should tie to one of the grounding lugs found at the top of

theenclosure.

4. Install the required panels into the metal runners.The PW5K2E1PS should be placed

in the right most location and installed according to its own instruction manual.The

PW5K1IC should be installed next to it as the right-most panel.

5. Wire the readers, input and output connections (see wiring guide at end of manual)

Autres manuels pour PW-5000

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NexWatch Enceinte

NexWatch

NexWatch PW-5000 Manuel utilisateur

NexWatch

NexWatch PW-5000 Manuel utilisateur

NexWatch

NexWatch ENGINERED SYSTEM PRO-2200 Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur