Nexus JP-103 Manuel utilisateur
OPERATION MANUAL
JP-103
Warning: Incorrect installation and/or operation could void your valuable warranty.
Please protect your investment! READ THIS MANUAL CAREFULLY
ALKALINE WATER IONIZER
Second floor, 163-12 DODANG DONG
WONMI-GU, BUCHON-SI,
KYUNG GI-DO KOREA 82-2-898-7005
NEXUS CO.,LTD
2 3
Power Related
Installation Precautions
During Usage
pH Reagent Liquid Precautions
Some helpful tips
Description
Safety Precautions
TABLE OF CONTENTS
03
04-05
06
07
07
Names and functions of Parts I
Names and functions of Parts II
How to install
How to Use
What is alkaline electrolyzed-reduced water?
How to Measure pH
How to add Calcium
How to replace the filter
Filter Composition
Water Flow Diagram
How to Use
Customer Service
Trouble shooting guide
Specifications
Warranty Card
08-09
10-11
12-13
14-17
18-19
20
21
22-23
24
25
26-27
28
29
Safety Precautions
If a break down occurs, do not make a repair by yourself. Contact the place of purchase or A/S center.
Electrical power precautions
If your ionizer becomes submerged in water, unplug the power
cord from the wall BEFORE removing the ionizer from the water.
Failure to do so may cause electric shock!
NEVER attempt to repair or service the unit yourself.
Contact your dealer.
Attempting to do so will void your valuable warranty!
Do not use your ionizer at voltages other than specified (AC 110V FOR USA).
Use a GFI outlet. Do not plug in your ionizer where it will exceed the rating of
outlet or electric wiring.
Failure to do so can result in fire, injury and/or damage to yourself,
wiring or ionizer!
NEVER touch the power cord or plug with wet hands
- this may result in electric shock!
220V
4 5
Safety Precautions
Installation Precautions
Protect your ionizer from freezing temperatures.
Protect your ionizer from direct sunlight.
Do not put anything heavy on top of your ionizer.
Do not install your ionizer on an unstable or soft surface.
Install only on a hard and level surface.
Maintenance Precautions
Common Sense Precautions
Always unplug your ionizer when changing the fuse or cleaning your ionizer
- failure to do so may result in electric shock.
Do not attempt to repair or service the unit yourself. Contact your dealer.
Attempting to do so will void your valuable warranty!
Make sure to use your ionizer only with potable water which is
suitable for human consumption.
DO NOT use your ionizer with well water, water with extreme hardness, high sediment or
TDS levels without first consulting your dealer.
Ensure the power plug is firmly and properly inserted into the outlet
- failure to do so may result in electric shock or fire!
Do not wash your ionizer by immersion or by pouring water over the main body;
always unplug your ionizer while cleaning the casing.
Clean with damp sponge or cloth.
6 7
Safety Precautions
If the appliance makes strange or unusual noises or burning
smells are detected, unplug the power cord immediately and
contact your dealer to arrange service.
Unplug your ionizer if you plan not to use it for an extended
period or turn off the main power switch on the back of the unit.
Filter replacement may be necessary.
pH Reagent Liquid Precautions
Do not expose the pH measuring reagent to extreme heat, flames
or fire. It is combustible.
Do not drink the pH reagent liquid, put it in the eyes or apply to the body.
- If the liquid is ingested, induce vomiting immediately and call
a doctor.
- If the liquid gets in the eyes, flush immediately and thoroughly
with cool water; call a doctor.
- If spilled or dropped on your body, wash if off immediately.
Make sure to keep the pH reagent liquid tightly closed and out of the reach of children.
Some helpful tips
For storing your alkaline water, glass or ceramic is best. Always try and
keep your stored water cool and away from direct sunlight.
You can use plastic, but only use lexan (number7) or poly bottles
(Nalge type). It is always best fresh out of the machine and ideal
if consumed on a day-today basis.
Do not store alkaline water in stainless steel, bronze or
aluminum containers.
Save the box and Styrofoam your ionizer came packed in.
This will help if your ionizer needs to be transported at a later date.
Do not use an ionizer downstream of a sodium-based ion exchange
softening system or Reverse Osmosis system without first consulting
with your dealer.
During Use
Do not run hot water through your ionizer.
Do not clean by pouring water over or spraying the ionizer.
Do not close, bend, pinch, press or otherwise obstruct
output ports or hoses.
8 9
Names and functions of Parts I
Rear cover
Acidic water outlet port
Tap water inlet
Filter cover
Body
Calcium Cap
Function display panel
Flexible stainless steel
alkaline water outlet.
Front Back
Flow Control Valve
This controls the flow rate of water through
your ionizer. Tip: This adjustment has DIRECT
impact on the performance of your ionizer.
Function button
Main switch
Volume Controller
Fuse Holder
AC Power cord
10 11
Names and functions of Parts II
Ion LED indicator
When lighted up, indicates that ionization is in progress.
Hot water warning LED indicator
When lighted up, it has defected hot water passing through the
machine. Switch to cold water immediately.
Filter and electrodes damage may occur upon exposure to hot water.
"ALKALINE" water button
Used to select alkaline water and the desired level (1-4)
"PURIFIED" water button
Used to select purified water.
"ACIDIC" water button
Used to select acidic water and the desired level (1-4)
Flux indicator
Indicates the water flow in your ionizer.
Filter life indicator
Counts filter usage in a LED display.
Alkaline water display indicator
The Alkaline indicator will light when alkaline water is selected.
Acidic water display indicator
The Acidic indicator will light when acidic water is selected.
Purified water display indicator
The Purified indicator will light when purified water is selected.
12 13
How to Install
Accessories
Acidic water
outlet
How To Install
pH test kit Diverter Hose Color chart Manual
Tap water
Inlet
Installation Method - At the sink with a diverter
1. ATTACH DIVERTER TO YOUR TAP - Remove the aerator from tap (pliers may be required), and attach
diverter valve in its place. There are adapters supplied in case the diverter does not fit your tap.
If you have leaks at the diverter, use plumber's Teflon tape. (Image No. 3)
(We are now including Teflon tape in ionizers. Please use this.).
1 2 3
Use a Teflon tape
Inlet
(Tap water)
Inlet hose
(PE hose)
Inlet Fitting(1/4”)
2. ATTACH THE WHITE TAP WATER INLET HOSE - Attach one end of the white hose to the gray port
on the bottom of the ionizer labeled "TAP WATER INLET" .
To attach the white hose, simply push it firmly into the
opening on grey port.
(If you need to remove it, press on the end of the fitting
while pulling out).
3. ATTACH THE GRAY ACIDIC WATER OUTLET HOSE
- to the white plastic port labelled ACIDIC WATER
OUTLET on the bottom of the ionizer. First, slide
a squeeze clamp over the end of the hose.
Then attach the gray hose, by simply pushing it
firmly over the white plastic port. Soaking it in hot
water for 30 seconds will make attaching it very easy.
Squeeze the clamp and position it over the white port.
Ensure the opposite end runs into the sink.
5. POSITION YOUR IONIZER - Ensure it is on a hard and level surface.
A wall mount can be done - there are keyhole slots on the back for this.
6. ATTACH THE WHITE HOSE TO THE DIVERTER - Remove the small compression nut on
the back of the diverter (opposite of the lever).
Slide the nut over the opposite end of the white hose
you attached to the TAP WATER INLET port with the
threads positioned so it will screw it back onto the
diverter. Push the hose firmly onto the nipple, then
screw the compression nut back on.
Ensure the nut is screwed firmly in place, but do
not over tighten.
7. CONNECT THE POWER CORD to an appropriate GFI outlet.
8. INSTALL FLEXIBLE STAINLESS STEEL SPOUT
- Screw this into the threaded port on the top of the ionizer.
Do not over tighten.
Inlet
(Tap water)
Outlet
(Acidic)
14 15
How to Use
1. POWER UP YOUR IONIZER.
- Depress the black power button located on the back of the ionizer to the
"ON" position.
- The black power button is ALWAYS left on. Your ionizer will "go to sleep" in
between uses and
"wake up" when it detects water flow again. It will always return to your last
selected setting.
- You will hear a single chime and the display panel will illuminate for 2-3 seconds.
- With the power on and the display panel dark, your ionizer is now in standby mode.
2. START WATER FLOW THROUGH YOUR IONIZER
a. SET THE FLOW CONTROL VALVE - This control is on the front of machine
and has an "ON" and "OFF" position. Try initially setting this half way
between "ON' and "OFF".
This control WILL DIRECTLY impact the performance of your ionizer.
A slow flow will yield higher pH; a fast flow will yield lower pH.
b. Turn on your water faucet. Turn the lever to until you "divert" the water through your ionizer.
c. Get the feel for the difference in flow rates by adjusting FLOW CONTROL VALVE from a slow
trickle to the fastest flow. When you begin ionizing the water, start with it in the medium range
and adjust faster or slower as necessary to achieve optimum results.
TO SELECT ALKALINE WATER
1. With water running through the ionizer:
2. Depress the "ALKALINE" button to select the desired setting from 1 - 4.
You will hear voice confirmation that "Alkaline water" has been selected, and the
LED Control Panel will be back-lit. The Alkaline Water Indicator
will light showing the level you have selected.
3. Note: Your ionizer will always "remember" the last setting used. If the previous selection was
Alkaline Level 2, when you start the ionizer the next time, your ionizer it will automatically
process at the same Alkaline Level 2.
4. To select a different level, depress the "ALKALINE" button to move to next level until the
desired setting level is achieved. The Alkaline Water Indicator will change accordingly.
IMPORTANT NOTES:
IMPORTANT NOTES:
If you have never consumed alkaline water - do not use a setting higher than 1 to begin with.
Let your body adjust slowly and naturally for 4-7 days. After this initial adjustment period,
you may gradually increase the alkalinity of the water.
pH levels will vary according to the minerals present in the source water and water flow rate
through your ionizer.
ALKALINE
Level 1
Alkaline Water
Level 2
Alkaline Water
Level 3
Alkaline Water
Level 4
Alkaline Water
16 17
How to Use
Level 1
Acidic Water
Level 2
Acidic Water
Level 3
Acidic Water
Level 4
Acidic Water
ACIDIC
PURIFIED
Note: Acidic water is for external use only. DO NOT DRINK.
DO NOT DRINK.
1. With water running through the ionizer:
2. Depress the "ACIDIC" button to select the desired setting from 1 - 4. You will
hear voice confirmation that "Acidic water" has been selected,
and the LCD Control Panel will be back-lit.
The Acidic Water Indicator will light showing the level you
have selected.
3. Note: Your ionizer will always "remember" the last setting used.
If the previous selection was Acidic Level 2, when you start flow through the ionizer
next time you use the ionizer it will automatically process at Acidic Level 2.
4. To select a different level, depress the "ACIDIC" button to move to next level until the desired
setting level is achieved. The orange symbol and number will change accordingly.
TO SELECT ACIDIC WATER TO SELECT "PURIFIED" WATER
With water flowing through the machine, depress the "PURIFIED" button.
The purified water runs through the Biostone filter, but does not receive any ionization.
You will hear a voice confirmation that "Purified water" has been selected, and the LCD Control
Panel will be back-lit.
The Purified Water Indicator will be illuminated.
The purified water comes out of the stainless steel spout.
HOW TO SHUT OFF THE WATER FLOW FROM YOUR IONIZER
Rotate the diverter lever until the water flow from the ionizer stops and reverts to the faucet.
The water will stop and the display panel will
go dark indicating the ionizer is in standby or "asleep".
PURIFIED PURIFIED
18 19
After the adjustment period you can drink the water at this next level.
This level is also great for cooking rice and other grains
- fluffier and great tasting!
You can get alkaline/acidic electrolyzed-reduced water by electrolyzing the water after filtering
impurities. Alkaline reduced water is the optimal water for health because it is rich in minerals
including calcium. Acidic water is good for skin.
Some people like this for drinking though it can start to taste strong
It is superb for making tea or coffee as it enhances the taste and reduces
bitterness!
Generally most people find this very strong tasting and with powerful
detoxifying effects.
Great for boiling vegetables! Alkaline water will eliminate the bitter taste
and brings out more of their natural color.
What is alkaline electrolyzed-reduced water?
What is alkaline electrolyzed-reduced water?
Some uses for the different levels of Alkaline Water
The Acid water has both antiseptic and antibacterial properties.
It also has an astringent effect and can be used for cosmetic purposes.
For initial consumption period
(4-7 days). Let your body adjust slowly to the increase in pH.
Many people find that this lower level is actually perfect for them.
What would I use the Filtered Water for?
The pH of Purified water is neither raised nor lowered and would be the
same as your tap water.
This water is simply cleaned of impurities by the advanced filtration system.
You can use it both as drinking water and to take medications with.
Some uses for the different levels of Acidic Water
Precautions for use of Alkaline water - don't develop a "drinking" problem!
Use it while brushing your teeth,
gargle with it and use it as a
natural mouth wash!
It is an excellent astringent;
use it for washing your face or
as a natural after shave.
In the kitchen use it to help
clean kitchen utensils.
This setting has sterilizing
properties - use it to sterilize
cutting boards,
dish towels etc…
If you have never consumed alkaline water - do not use a setting higher than 1 to begin with.
Let your body adjust slowly and naturally for 4-7 days. After this initial adjustment period, you
can gradually increase the alkalinity of the water.
Do not take medications with alkaline water. Take medications only with purified water.
Consult with a physician before drinking alkaline water if you have:
- Chronic disease
- Are currently under medical treatment
Do not drink alkaline water if you have achlorhydria.
Consult a physician before using acidic water if you have:
- Sensitive skin
- Allergies
Only use potable drinking water in your ionizer.
Poor water quality may have negative effects on your health and your ionizer! Most municipal
water sources will be fine in your ionizer.
Well water and water from smaller systems should be checked, and may require pre-filtering.
Your ionizer is not under warranty for any damage or required cleaning caused by hard water
deposits.
Table des matières
Manuels Système d'eau populaires d'autres marques
Spirotech
Spirotech SPIROVENT SUPERIOR S250 Manuel utilisateur
Culligan
Culligan Aqua-Cleer Aqua-Cleer Advanced Drinking Water... Manuel utilisateur
A.O. Smith
A.O. Smith Dura-Max AJH - 1000A - P Manuel utilisateur
Microline
Microline T.F.C.-4 Manuel
Eureka Forbes
Eureka Forbes Aquaguard Select Manuel utilisateur
Cetetherm
Cetetherm AquaEfficiency Manuel utilisateur
