Next Level Racing GT ELITE LITE Manuel utilisateur

Video Instruction: bit.ly/nlrbuild

TAKE RACING TO THE NEXT LEVEL®

*ELECTRONICS NOT INCLUDED

SIDE MOUNT

INSTRUCTION MANUAL

2 3

support@nextlevelracing.com Video Instruction: bit.ly/nlrbuild

YOUR

SIM RACING

JOURNEY

STARTS

HERE

We know you’re eager to start racing! Take your time with the

instructions and follow this guide to assemble your product.

You’ll be setting yourself up for success with following the

instruction booklet to fully optimize your product.

TAKE RACING

TO THE NEXT LEVEL®

NEXTLEVELRACING.COM

@nextlevelracingOcial

@next_level_racing

@nextlvlracing

Next Level Racing

support@nextlevelracing.com

ASSEMBLY

VIDEO

bit.ly/nlrbuild

support@nextlevelracing.com

Video Instruction: bit.ly/nlrbuild

WARNING

• Please do not use power tools for assembly as over tightening can damage your frame.

• If you require further support, consult the installation video or contact us at support@nextlevelracing.com

• Please ensure T-Nuts are correctly placed within the extrusion.

• Lay out and build the cockpit on a level surface.

• The GTElite Lite is a 2 person build.

• Do not force parts together.

• Avoid cross threading bolts.

If you require any support with

your product please contact our friendly team at:

support@nextlevelracing.com

PRE-RACE

CHECKS IN THE

BOX

WARNING

CHOKING HAZARD - Small parts not for children under 3 years

or any individuals who have a tendency to place inedible objects

in their mouths.

ASSEMBLY

VIDEO

bit.ly/nlrbuild

LEFT WHEEL POST RIGHT WHEEL POST

SEAT SLIDERS

LEFT PEDAL ARM RIGHT PEDAL ARM

*NOT TO SCALE

LEFT BASE RIGHT BASE

SIDE MOUNT BRACKETS

FRONT BASE REAR BASE

support@nextlevelracing.com Video Instruction: bit.ly/nlrbuild

WHEEL POST CONNECTION PLATES

MOUNTING BRACKETS PEDAL ADJUSTMENT FINS

BUTTKICKER MOUNT POLE ALLEN KEYS

SMALL LEVEL 4 x FELT PAD (40mm x 35mm)

4 x FELT PAD (90mm x 10mm)

5 x END CAP (40 x 40) 1 X SPANNER

34 x M8 16mm BOLTS

2 x M8 60mm BOLTS

4 x M8 16mm COUNTERSUNK BOLTS

4 x M8 20mm COUNTERSUNK BOLTS

10 x M8 20mm BOLTS 8 x M8 35mm BOLTS 8 x M8 40mm BOLTS

TOOL KIT HOLDER

4 X ADJUSTABLE FEET

4 X SEAT SLIDER RATCHET HANDLES

6 X M8 FLANGE NUTS

8 X M6 FLANGE NUTS

58 x M8 WASHERS

16 x M6 WASHERS

52 x M8 FULL WIDTH T-NUTS

14 x NYLON WASHERS

LARGE PEDAL PLATE SMALL PEDAL PLATE

6 X CABLE CLIPS

4 X SEAT SLIDER TABS

6 7

2 x M8 SQUARE WASHERS

5 x END CAP (40 x 80) 5 x END CAP (40 x 80 ANGLED)

NOTE: Some Items Come with

Rust Resistant Coating

FRONT MOUNT BRACKET SPACER PLATES

5 x M8 14mm LOW PROFILE BOLTS

5 x M8 25mm LOW PROFILE BOLTS 16 x M6 15mm BOLTS

support@nextlevelracing.com Video Instruction: bit.ly/nlrbuild

8 9

01a Slide 8 x T-Nuts into the outside channels of the Left Base.

IMPORTANT: Place T-Nuts as shown in diagram below on the OUTSIDE of the Left Base.

(Red dots are T-Nuts placement)

LEFT

RIGHT

REAR

FRONT

FRONT REAR

ANGLE HEIGHT DISTANCE

Note: Slide 2 x

T-Nuts to front for

Pedal Support

Note: Slide 4 x

T-Nuts to middle for

Wheel Post

Note: Slide 2 x

T-Nuts to rear for

Seat Sliders

Note: For easier installation hand

screw M8 bolt into T-Nut to assist

sliding T-Nut into channel.

Install cable clips at the location you would like them

during the build. Leaving the installation of cable clips

to the end can present installation issues. Depress the

alignment tab at the back during installation.

• Please do not use power tools for assembly as over tightening can damage your frame.

• Please ensure T-Nuts are correctly placed within the extrusion.

• Lay out and build the cockpit on a level surface.

• Do not force parts together.

• Avoid cross threading bolts.

• If you require further support, consult the installation video or contact us at support@nextlevelracing.com

• The GTElite Lite is a two person build with the complete cockpit a two person move.

• Beware of sharp edges on the extrusion pieces.

ALUMINIUM EXTRUSION TIPS

PARTS:

•

• 4 x M8 40mm Bolts

•

• 4 x M8 Washers

PARTS:

•

• Cable Management Clips

PARTS:

•

• 4 x M8 40mm Bolts

•

• 4 x M8 Washers

10 11

01b Slide 8 x T-Nuts into the outside channel of the Right Base.

support@nextlevelracing.com Video Instruction: bit.ly/nlrbuild

10 11

FRONT

REAR

IMPORTANT: Place T-Nuts as shown in diagram below on the OUTSIDE of the Right Base.

(Red dots are T-Nuts placement)

LEFT

RIGHT

REAR

FRONT

04 Align the threaded holes on the Front and Rear Base Members with the pre-drilled holes on the Left

Base Member. Bolt through and secure with 4 x M8 Bolts and Washers.

Suggested 1 x Cable Management Clip installation into the Rear or Front Base Member.

02 Align the threaded holes on the Front and Rear Base Members with the pre-drilled holes on the Right

Base Member. Bolt through and secure with 4 x M8 Bolts and Washers.

FRONT

REAR

RIGHT

Note: Slide 2 x

T-Nuts to front for

Pedal Support

Note: Slide 4 x

T-Nuts to middle for

Wheel Post

Note: Slide 2 x

T-Nuts to rear for

Seat Sliders

Note: For easier installation hand

screw M8 bolt in to T-Nut to assist

sliding T-Nut into channel.

Note: Depress locater tab on back

side of clip to install into channel.

LEFT

REAR

RIGHT

PARTS:

•

• 4 x T-Nuts

•

• 4 x Adjustable Feet

PARTS:

•

• Wheel Post Connection Plates

•

• 8 x M8 35mm Bolts

•

• 8 x M8 Washers

•

• 2 x Wheel Posts

PARTS:

•

• 4 x M8 20mm Bolts

•

• 4 x M8 Washers

PARTS:

•

• 4 x M8 20mm Bolts

•

• 4 x M8 Washers

support@nextlevelracing.com Video Instruction: bit.ly/nlrbuild

05 10

Align the threaded holes on the Wheel Post Connection Plates with the holes on the Wheel Posts.

Bolt through and secure using M8 Bolts and Washers.

12 Align the Left Wheel Post assembly with the T-Nuts previously installed in Step 01a.

Bolt through and secure with 4 x M8 Bolts and Washers.

11 Align the Right Wheel Post Assembly with the T-Nuts previously installed in Step 01b.

Bolt through and secure with 4 x M8 Bolts and Washers.

Slide 4 x T-Nuts into the bottom channels of the Base Assembly as shown.

06 Align the NLR Height Adjustable Feet with the

T-Nuts previously installed in Step 05. 07 Install the NLR Height Adjustable Feet into T-Nuts

previously installed in Step 05.

08 Align the tab on the NLR Height Adjustable Feet

with the channel on the bottom of the extrusions. 09 Tighten the Bolts inside the NLR Height Adjust-

able Feet with an Allen Key. Install Rubber Plug.

(FRONT)

(REAR)

12 13

(L)

(R)

(L)

(R)

Note: Height of the foot can be adjusted only

when it’s installed on to the cockpit.

Note: Foot alignment tab

should sit in the channel.

(FRONT)

(REAR)

Note: Counterbore

holes facing outside

PARTS:

•

• 8 x T-Nuts

•

• Right and Left Pedal Arms

PARTS:

•

• 2 x M8 60mm Bolts

•

• 2 x M8 Washers

•

• 2 x M8 Flange Nuts

•

• 2 x Square Washers

PARTS:

•

• 2 x T-Nuts

•

• Right and Left Pedal Arms

PARTS:

•

• 2 x M8 20mm Bolts

•

• 2 x M8 Washers

PARTS:

•

• 4 x M8 16mm Bolts

•

• 4 x M8 Washers

•

• 1 x Large Pedal Plate

PARTS:

•

• 2 x M8 16mm Bolts

•

• 2 x M8 Washers

•

• 1 x Small Pedal Plate

18 A) Align the Small Pedal Plate with the T-Nuts previously installed in Step 13.

B) Bolt through and secure using M8 Bolts and Washers.

15 Install 1 x T-Nut into the outside channel of each Pedal Arms.

13 Install 3 x T-Nuts into the top channel and 1 x T-Nut into the outside channel of both the Left Pedal Arm

and the Right Pedal Arm.

17 A) Align the Large Pedal Plate with the T-Nuts previously installed in Step 13.

B) Bolt through and secure with M8 Bolts and Washers.

14 Align the through holes on the Pedal Arms with the holes on the Wheel Post Connection Plates. Bolt

through and secure with 2 x M8 Bolts, Washers, Square Washers and Flange Nuts.

Align the hole on the Wheel Post Connection Plate with the T-Nuts previously installed in Step 15. Bolt

through and secure with M8 Bolt and Washer. Repeat on the other side.

support@nextlevelracing.com Video Instruction: bit.ly/nlrbuild

14 15

(PRE-DRILLED HOLE)

(LEFT)

(RIGHT)

Note: For Shorter Users Please Skip

to STEPS 15 & 16.

ALTERNATE PEDAL INSTALLATION

(FOR SHORTER USERS)

(LEFT)

(RIGHT)

ALTERNATE PEDAL INSTALLATION

(FOR SHORTER USERS)Repeat

on Other

Side

Note: Do not tighten the

Pedal Plate until you achieve

the desired position.

Repeat

on Other

Side

A)B)

Note: Use laser lines for

easy alignment.

Repeat

on Other

Side

A)B)

OUTSIDE VIEW TOP VIEW

Repeat

on Other

Side

PARTS:

•

• NIL

PARTS:

•

• 4 x M8 16mm Bolts

•

• 4 x M8 Washers

•

• 2 x Pedal Adjustmen Fins

PARTS:

•

• 2 x M8 16mm Bolts

•

• 2 x M8 Washers

PARTS:

•

• 1 x Buttkicker Mount Pole

•

• 2 x M8 16mm Bolt

•

• 2 x M8 Washers

PARTS:

•

• 2 x Seat Slider Ratchet Handles

PARTS:

•

• 2 x Seat Sliders

•

• 4 x Seat Slider

•

• 4 x M8 Counter

End Plates sunk Bolts

•

• 4 x Sticky Felt Pads (35mm x 40mm)

•

• 6 x T-Nuts

support@nextlevelracing.com

Video Instruction: bit.ly/nlrbuild

Loosen the Bolts securing the Pedal Plates. Adjust to the desired position using the alignment lines

and tighten the Bolts to lock in place.

21 Adjust the pedal assembly to the desired angle and align the T-Nuts previously installed in STEP 13

with the holes on the Pedal Adjustment Fins. Bolt through and secure with M8 Bolts and Washers.

20 Align the bottom mounting holes on the Pedal Adjustment Fins with the T-Nuts previously installed in

Step 01b. Bolt through and secure using M8 Bolts and Washers. Repeat on the other side.

24 A) Align the front Seat Slider assembly with the T-Nuts previously installed in Step 01a & Step 01b.

B) Bolt through and secure with 2 x Ratchet Handles.

23 A) Align the holes on the Buttkicker Mount Pole with the T-Nuts previously installed in Step 22.

B) Bolt through and secure with 2 x M8 Bolts.

A) Install 2 x T-Nuts into the top channels of both Seat Sliders for future seat installation and 2 x T-Nuts into the bottom channel

of the front Seat Slider for the Butt-kicker Mount Pole. Attach Felt Pads to the bottom of the Seat Sliders.

B) Align the holes on the Seat Slider End Plates with the threaded holes on the Seat Sliders. Bolt through and secure with

4 x M8 Countersunk Bolts.

Repeat

on Other

Side

PEDAL ADJUSTMENT RANGE

Repeat

on Other

Side

PEDAL ANGLE ADJUSTMENT

Repeat

on Other

Side

A)B)

(Butt-Kicker T-Nut Locations)

A)B)

Repeat

on Other

Side

A)B)

PARTS:

•

• 8 x M8 T-Nuts

PARTS:

•

• Mounting Arms

•

• 8 x M8 16mm Bolts

•

• 8 x M8 Washers

•

• 4 x Sticky Felt Pads (90mm x 10mm)

PARTS:

•

• Front Mount Bracket

•

• 4 x M8 16mm Bolts

•

• 4 x M8 Washers

PARTS:

•

• 4 x M8 25mm Low Proﬁle Bolts

•

• 4 x M8 Nylon Washers

•

• 4 x M8 Flange Nuts

PARTS:

•

• NIL

PARTS:

•

• 2 x Seat Slider Ratchet Handles

18 19

support@nextlevelracing.com Video Instruction: bit.ly/nlrbuild

30 Loosen the Bolts securing the Side Mount Brackets to the Front Mount Brackets. Adjust the Wheel

Base to the desired angle and tighten the Bolts to lock in place.

29 Align the Wheel Base Assembly with the slots on the Mounting Arms. Bolt through and secure with

4 x M8 Low Proﬁle Bolts, Nylon Washers and Flange Nuts.

Install 2 x T-Nuts into the front channel and 2 x T-Nuts into the rear channel of the Left Wheel Post.

Repeat for the Right Wheel Post.

27 A) Install Felt Pads to the Mounting Arms to avoid scratching of Wheel Post when adjusting the height of the wheel.

B) Align the holes on the right Mounting Arm with the T-Nuts previously installed in Step 26. Bolt through and secure with 4 x

M8 Bolts and Washers. Repeat on the other side.

Felt Pads

28 A) Align the slots on the Front Mount Bracket with the mounting holes on your Front Mount Wheel Base.

B) Bolt through and secure with 4 x M8 Bolts and Washers.

A) Align the rear Seat Slider assembly with the T-Nuts previously installed in Step 01a & Step 01b.

B) Bolt through and secure with 2 x Ratchet Handles.

FRONT MOUNT ANGLE ADJUSTMENT

A)B)

Repeat

on Other

Side

A)B)

Note: Use level provided to ensure

the Wheel Assembly is kept ﬂat during

installation to avoid skewing.

Note: Use level provided to ensure

the Wheel Assembly is kept ﬂat during

installation to avoid skewing.

Repeat

on Other

Side

FRONT MOUNT ASSEMBLY

A)B)

Ce manuel convient aux modèles suivants

Autres manuels Next Level Racing Accessoires de jeux vidéo

Next Level Racing

Next Level Racing ERS2 Manuel utilisateur

Next Level Racing

Next Level Racing FLIGHT SIMULATOR LITE Manuel utilisateur

Next Level Racing

Next Level Racing WHEEL STAND 2.0 Manuel utilisateur

Next Level Racing

Next Level Racing GT Lite Manuel utilisateur

Next Level Racing

Next Level Racing F-GT LITE IRACING EDITION Manuel utilisateur

Next Level Racing

Next Level Racing FLIGHT SEAT PRO Manuel utilisateur

Next Level Racing

Next Level Racing Traction Plus Manuel utilisateur

Next Level Racing

Next Level Racing FGT ELITE Manuel utilisateur

Next Level Racing

Next Level Racing GT ELITE Manuel utilisateur

Next Level Racing

Next Level Racing WHEEL STAND RACER Manuel utilisateur

Next Level Racing

Next Level Racing PlayStation GT LITE Manuel utilisateur

Next Level Racing

Next Level Racing NLRS014 Manuel utilisateur

Next Level Racing

Next Level Racing GTTRACK Manuel utilisateur

Next Level Racing

Next Level Racing F-GT LITE Manuel utilisateur

Next Level Racing

Next Level Racing ELITE FLIGHT PACK Manuel utilisateur

Next Level Racing

Next Level Racing GT Lite Manuel utilisateur

Next Level Racing

Next Level Racing NLR-S025 Manuel utilisateur

Next Level Racing

Next Level Racing ES1 Manuel utilisateur

Next Level Racing

Next Level Racing GO KART PLUS Manuel utilisateur

Next Level Racing

Next Level Racing NLR-S015 Manuel utilisateur

Next Level Racing

Next Level Racing FGT ELITE Manuel utilisateur

Next Level Racing

Next Level Racing FLIGHT SEAT Manuel utilisateur

Next Level Racing

Next Level Racing GTELITE Manuel utilisateur

Next Level Racing

Next Level Racing Elite gaming chair Manuel utilisateur

Manuels Accessoires de jeux vidéo populaires d'autres marques

VENOM

VENOM VS3057 Manuel utilisateur

LINK-MI

LINK-MI HDVC01 Manuel utilisateur

Thrustmaster

Thrustmaster T60 Manuel utilisateur

Avermedia

Avermedia C875 Manuel utilisateur

VENOM

VENOM VS2728 Manuel utilisateur

DGT

DGT 960 Manuel utilisateur

Sega

Sega Visual Memory Unit Manuel utilisateur

Datel

Datel Go-tcha Expedition Manuel utilisateur

TruGolf

TruGolf TruFlight 2 Manuel utilisateur

CH Products

CH Products CH PRO THROTTLE Manuel utilisateur

Thrustmaster

Thrustmaster T2PA Manuel utilisateur

Cube Controls

Cube Controls Mercedes-AMG - GT Edition SIM Wheel Manuel utilisateur

Hoffmann

Hoffmann Club Pro Manuel utilisateur

ardistel

ardistel ADT SpeedRacer Manuel utilisateur

Sven

Sven GC-W150 Manuel utilisateur

Deltaco Gaming

Deltaco Gaming GAM-131 Manuel utilisateur

Huffy

Huffy M731324 Manuel utilisateur

Ace Bayou

Ace Bayou X Rocker Manuel utilisateur