Nexo P18 Manuel utilisateur

PAGE 1 OF 4

- Read this document before using.

- Keep this document.

- Observe all warnings and cautions.

PNI-P18TOL18

DP6772 –01a - DI

P18 Under L18 Rigging System

Contents:

X1 Ceiling Plate

X1 Left Plate

X2 Main Plate

X1 Right Plate

X8 M10x30 (a)

X6 M10x18 (a)

X2 M10x25 (a)

X2 M6x25 (a)

(a): The type of the screws may differ from the representation.

Weight: 21 kg / 46.2 lb

PAGE 2 OF 4

- Read this document before using.

- Keep this document.

- Observe all warnings and cautions.

Dimensions:

For fixation, you have the choice between M8 and M10

WARNINGS

Ensure that the mounting location and fasteners can support at least 4 times the weight of all the installed cabinets, auxiliary

equipment and cables.

Use only the provided screws (thread lock coated) and accessories.

Implementation of a L18

Prepare the Main plates by screwing the

M10x30 screws on the holes (see picture

below), do not tighten completely and leave

at least 6mm.

Assemble the Plates on each side of L18

using the M10x18 screws.

Place the assembly below the

ceiling plate.

Tighten the screws. Secure with the 4

provided M10x30 screws.























 











PAGE 3 OF 4

- Read this document before using.

- Keep this document.

- Observe all warnings and cautions.

Implementation of a P18

Place P18 between the plates, position at the chosen

angle, fasten with M10x25 screws and secure with

M6x25 screws.

PNI-P18TOL18 frame tilt (+/-1°)

P18

Holes 1

Holes 2

Holes 3

Holes 4

Holes 5

Holes 6

Holes 7

0°

8°

5°

1.5°

-2°

-8.5°

-11.5°

-14°

-10°

7°

4,5°

1°

-2.5°

-8°

-12,0°

-14°

-20°

6°

4°

0.0°

-2,5°

-7.5°

-12°

-13.5°

-30°

5,0°

3°

0.5°

-3°

-6.5°

-12,5°

-13°

-40°

4,5°

2,5°

-0.5°

-3°

-6°

-12,5°

-13°

-50°

4.5°

2,0°

-1°

-3.5°

-5,5°

-13°

-12,5°

Note 1 : Holes 1 are those toward F.O.H.

Note 2 : All angles measurements have been done without cables weight.

Note 3 : Angles are in relation to Horizontal position ( 0° )

PAGE 4 OF 4

- Read this document before using.

- Keep this document.

- Observe all warnings and cautions.

Standard inclinations :

0°

-10°

-20°

-30°

-40°

-50°

•NEXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself.

•Please check the web site nexo-sa.com for the latest update.

Autres manuels pour P18

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Nexo Support et étagère

Nexo

Nexo P Series Manuel utilisateur

Nexo

Nexo LNI-3L18 Manuel utilisateur

Nexo

Nexo VNI-WS10 Manuel utilisateur

Nexo

Nexo FS0081-001 Manuel utilisateur

Nexo

Nexo IDT-POLE32x1400 Manuel utilisateur

Nexo

Nexo VNI-WB02 Manuel utilisateur

Nexo

Nexo P15 Manuel utilisateur

Nexo

Nexo MSUB12-I Manuel utilisateur

Nexo

Nexo GEO M10 Manuel utilisateur

Nexo

Nexo LNI-3L15 Manuel utilisateur

Nexo

Nexo N200 Manuel utilisateur

Nexo

Nexo 2PNI-P12TO2L15 Manuel utilisateur

Nexo

Nexo GPT-SSBRK Manuel utilisateur

Nexo

Nexo PNI-P15TO2L18 Manuel utilisateur

Nexo

Nexo P18 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur