Newport CONEX-CC Manuel utilisateur

CONEX-CC

Single-Axis DC Motion

with Controller/Driver

Controller GUI

Manual

.0.x

CONEX-CC Controller GUI Manual

Original instructions.

No part of this document may be reproduced or copied without the prior written

approval of Newport Corporation. This document is provided for information only, and

product specifications are subject to change without notice. Any change will be

reflected in future publishings.

EDH0277En1041 — 10/17 ii

CONEX-CC Controller GUI Manual

Table of Contents

1.0 Introduction .................................................................................................. 1

1.1 Purpose .............................................................................................................................1

1.2 Overview ..........................................................................................................................1

1.3 Controller State Diagram..................................................................................................2

2.0 Installation..................................................................................................... 3

2.1 Install CONEX-CC Graphical User Interface...................................................................3

2.2 Launch GUI ......................................................................................................................3

3.0 Getting Started.............................................................................................. 4

3.1 Discover Instruments........................................................................................................4

4.0 User Interface................................................................................................ 5

4.1 Configuration....................................................................................................................5

4.2 Main..................................................................................................................................8

4.3 Tracking..........................................................................................................................10

4.4 Diagnostics .....................................................................................................................12

4.5 About ..............................................................................................................................13

Service Form ........................................................................................................ 15

iii EDH0277En1041 — 10/17

CONEX-CC Controller GUI Manual

EDH0277En1041 — 10/17 iv

CONEX-CC Controller GUI Manual

1.0 Introduction

1.1 Purpose

The purpose of this document is to provide instructions on how to use the

CONEX-CC Controller graphical user interface (GUI).

1.2 Overview

The CONEX-CC Controller GUI is a graphical user interface, that allows the user to

interact with the CONEX-CC controller that is connected to stages with DC motors

and encoder feedback. The user can initiate moves, change the state of the controller,

adjust parameters, etc.

Single

-Axis DC Motor

Controller/Driver

CONEX

-CC

1 EDH0277En1041 — 10/17

CONEX-CC Controller GUI Manual

1.3 Controller State Diagram

The CONEX-CC controller is defined by the following state diagram.

NOTE

The position tracking is available only from the controller version 2.0.0

Controller’s LED display:

NOT REFERENCED: If everything is OK then SOLID ORANGE.

NOT REFERENCED: If hardware faults or wrong parameters then SOLID RED.

NOT REFERENCED: If end of runs then SLOW BLINK ORANGE.

CONFIGURATION: SLOW BLINK RED.

READY / READY T: SOLID GREEN.

DISABLE / DISABLE T: SLOW BLINK GREEN.

HOMING: FAST BLINK GREEN.

MOVING: FAST BLINK GREEN.

TRACKING: FAST BLINK GREEN.

EDH0277En1041 — 10/17 2

CONEX-CC Controller GUI Manual

2.0 Installation

2.1 Install CONEX-CC Graphical User Interface

Following are steps to install CONEX-CC GUI.

•For 32 bit, Select and launch “CONEX-CC Utility Installer Win32.exe”. For 64

bit, Select and launch “CONEX-CC Utility Installer Win64.exe”.

•A window opens up showing Install welcome page.

•Click on “Next”.

•A window opens up allowing destination folder selection. By default it is showing

C:\.

•Click on “Next”.

•Ready to install window opens up. Click “Install”.

•Then installation starts, wait for completion. Click on “Finish” to finalize the

installation.

32 bit installer will be installed “Newport.CONEXCC.CommandInterface.dll” in

GAC_32 folder and 64 bit installer will be installed the dll in GAC_64 folder.

NOTE

LabVIEW user can add reference of command interface dll from GAC during VI

creation.

2.2 Launch GUI

From Windows “START” menu, select “All Programs\Newport\Motion

Control\CONEX-CC\CONEXCC Utility”.

3 EDH0277En1041 — 10/17

CONEX-CC Controller GUI Manual

3.0 Getting Started

3.1 Discover Instruments

Start the Controller GUI from Newport\MotionControl\CONEX-CC.

Next, click on “Discover” button and the number of instruments discovered will

appear. This window allows the user to select a com port where the desired instrument

is connected.

NOTE

When more than one CONEX-CC instrument is connected, this window allows

the user to switch the instruments between X and Y axes. To discern a com port

for a specific instrument, note their COM number in the Device Manager when

the connection is added.

Next, click “Launch Applet” button.

EDH0277En1041 — 10/17 4

CONEX-CC Controller GUI Manual

4.0 User Interface

4.1 Configuration

The Configuration tab allows the user to view and / or change information related to

the logging configuration and the instrument settings. Read only values are displayed

for the log file name and the log file path. The logging level may be changed to any of

the settings in the drop-down list on the right hand side. Trace is the most detailed of

the settings and when this setting is selected the Controller GUI logs everything.

Critical Error is the least detailed of the settings and when this setting is selected the

Controller GUI will only log errors that are defined to be critical.

The polling interval defines the number of milliseconds between each time the

Controller GUI polls the CONEX-CC for the latest information. The user may change

the polling interval by entering a value. Diagnostics Delay defines the time delay in

milliseconds between each command sent from a text file.

InstrumentType and NoOfInstruments display the name and number of connected

instruments.

The Save button allows to save the current settings to the configuration file.

5 EDH0277En1041 — 10/17

CONEX-CC Controller GUI Manual

Configurable settings

The following table describes all the settings that can be changed by the user.

Parameter

Description

Values

Default

LoggingConfiguration

Level

Logging level.

Trace is the most detailed of the settings and when this

setting is selected the Controller GUI logs everything.

Critical Error is the least detailed of the settings and when

this setting is selected the Controller GUI will only log

errors that are defined to be critical.

Trace

Detail

Equipment Message

Info

Warning

Error

Critical Error

Trace

InstrumentInformation

PollingInterval

The polling interval defines the number of milliseconds

(delay) between each time the Controller GUI polls the

instrument for the latest information.

An Integer

200

NbDigits

Number of fractional digits after the decimal point.

An Integer

Diagnostic

Delay

The delay defines the number of milliseconds between each

sent command from a text file.

An Integer

MemorizePositionsRollingBuffer

Buffer Depth

BufferDepth defines the maximum number of

analog I/O values displayed in the chart.

Positions

Positions is a list of memorized positions. The format is

“Name of positions #1; X position #1; Y position #2…”

Models\InstrumentInfo

XAxis

XAxis defines the instrument for X axis.

None = no instrument for X axis

Instrument 1

Instrument 2

None

Instrument 1

YAxis

YAxis defines the instrument for Y axis.

None = no instrument for Y axis

Instrument 1

Instrument 2

None

Instrument 2

CommunicationChannel

The communication channel

USB

InstrumentType

Specifies type of instrument connected to computer

Name of instrument

NoOfInstruments

Specifies number of instruments connected to computer

An Integer

0 if nothing is

connected

TrackingConfiguration

XDirection

The axis direction for X axis.

Normal

Inverse

Normal

YDirection

The axis direction for Y axis.

Normal

Inverse

Normal

StartedSensibility

The started sensibility defines the zoom level of the

tracking panel after Controller GUI launching.

An Integer (1<20)

MinimumAmplitudeX

The minimum amplitude for X axis.

A Double

0.001

MaximumAmplitudeX

The maximum amplitude for X axis.

A Double

MinimumAmplitudeY

The minimum amplitude for Y axis.

A Double

0.001

MaximumAmplitudeY

The maximum amplitude for Y axis.

A Double

IncrementalStep

The maximum incremental step when the tracking is in

incremental displacement mode.

A Double

0.05

EDH0277En1041 — 10/17 6

Table des matières

Autres manuels Newport Entraînement CC

Newport

Newport New Focus 8712 Manuel utilisateur

Newport

Newport 5600 Series Manuel utilisateur

Manuels Entraînement CC populaires d'autres marques

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Manuel utilisateur

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Manuel de la liste des pièces

Chamberlain Garog

Chamberlain Garog D Series Manuel utilisateur

Parker

Parker PDS Series Manuel utilisateur

Festo

Festo DGC G Series Guide de configuration

Binks

Binks QS-5012-1-CE Manuel utilisateur

Danfoss

Danfoss VLT 2800 Series Fiche technique

ABB

ABB ACQ580-01 Series Manuel d'installation

YASKAWA

YASKAWA CANopen SI-S3 Manuel utilisateur

GE D20A6 Manuel utilisateur

Unex

Unex MC-D-250-1000-050W-TW Manuel utilisateur

Geckodrive

Geckodrive G213V Manuel utilisateur

ABB

ABB RSYC-01 Manuel utilisateur

Rockwell Automation

Rockwell Automation PowerFlex 700S Manuel du propriétaire

WEG

WEG DeviceNet CFW500 Manuel utilisateur

Siemens

Siemens SINAMICS G Fiche technique

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Mode d'emploi

SOMFY

SOMFY JR RU 30 Manuel utilisateur