Newland ME50N Manuel utilisateur
ME50N User Manual
LTE Wireless Router
Thanks for choosing ME50N 4G wireless Terminal, please read and
keep the user manual carefully. It is more convenient for you to use our
router.
1、Main Technology Parameters
●Working temps : 0℃-- +50℃
●Relative humidity: 5%--95%
●Working frequency : LTE: Band/4/7/66 WCDMA: Band2/5
●Power supply : input AC :100V~240V，50Hz~60Hz
Output DC: 12V, 1000mA
●Size: 175mm*155mm*75mm
●Weight: 250g
●Rate of uplink and downlink :LTE(Cat 4): DL150Mbps；
UL50Mbps
2、Product Manual
2.1 Product diagram
2.2 Product interface
(1) External ANT interface
(2)WLAN&&WPSON/OFFSwitch
(3)SIMCard (4)ResetButton
(5) Phone Port (6) LAN Port
(7)PowerSwitch (8)DCPower
2.3 Indicator
Type Status Description
OFF not connected
Yellow Connected the internet, The signal is poor
SIGNAL
Green Connected the internet, Signal is good
OFF WIFI unopened
ON WIFI is opened and has data transmission
WLAN Flicker Press WPS key for 4 seconds, then release, the
WPS lights will be flashing. If device has been
connected, WPS light will be off. If device is
always not connected ,the light will just flashing
2min ,then to go out
OFF Power abnormal, the router power off
POWER ON Power normal, the router power on
3、Quickly Configuration Guide
The router support standard RJ45 cable or WLAN wireless way
to connect computer, Support Windows XP, Windows 7,Windows
8,MAC OS, Linux, Android and so on.
First Step：
(1) Take out the device, insert the SIM card according to the
instructions, and then use the matching power adapter to
supply power to the devices.
(2) Make the computer obtain IP address automatically, once the
computer get IP, input CPE IP address into the browser, press“enter”to
access CPE home page, click “login “in upper right corner to access
login page. You can get CPE default IP address、username and
password from the nameplate attached at back cover.
Second step：
Go to the “Quick Settings”
(1) SSID configuration, the user can customize the SSID, easy to use
and memory.
(2) WiFi password settings, the user can customize the WiFi encryption
mode, and set their own password to prevent others from stealing the
traffic and to protect the security of the account.
(3) Preview the contents of the configuration, confirm is correct and
click on the “aplicar”.
4、Package Contents
1 x ME50N 4G wireless Terminal 1 x Power Adaptor
1 x LAN Port Cable (RJ45) 1 x ME50N User Manual
1 x External Antenna
5、Precautions
(1) When you remove and insert the SIM card, please ensure the
device without power.
(2) Do not use the equipment in case of lightning weather and
unplug the external antenna and power adapter.
(3) If the device working fine, you’d better not change the
parameter or other function, if you changed it and cannot access
Internet or have poor experience, please press and hold the reset
button for more than 7 seconds to restore the factory settings.
6、Common faults and treatment methods
Common faults Treatment methods
The device is powered on
but the front panel power
light is off.
Check the line connection is correct,
the outlet is energized, and the power
adapter is consistent with the
nameplate power supply.
Computer local connection
is not displayed, cannot
successfully PING IP
address of the device,
cannot open the WEB
page.
Check if the computer's network card
is up and the computer has obtained
the IP address. The computer is best
set to automatically obtain IP (DHCP
need to open the device, the default is
open), if it is manually set, make sure
that the set IP address and the device
in the same network segment.
The device is working but
cannot access the internet
through the web
Set the computer to automatically
obtain the IP address and DNS server
address.
Change admin page login
password or SSID
password, but forget
password
Long press the reset button for more
than 7 seconds to restore the factory
settings, and then from the rear body
nameplate for relevant information.
7、FCC Statement
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions (1)this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Autres manuels Newland Routeur réseau
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité