NEUTRIK OpticalCON Manuel utilisateur

CAUTION: Laser radiation, do not stare into beam!

2. Dry cleaning using FOCD-CLETOP-S-B cleaning device

2.1.

2.2.

2.3.

Follow the instructios A. 1.1. to A. 1.3.

Clean LC connectors according cleaning device

instructions

Follow the instructions A. 1.8. to A. 1.11.

1.1.

1.2.

1.3.

1.4.

1.5.

1.6.

1.7.

1.8.

1.9.

1.10.

1.11.

Disconnect both cable ends for safety reasons

Untighten the connector bushing and remove carefully

the insert of the connector housing.

Inspect the LC connectors with a fiberscope.

Fold a lint-free wipe into a square (about 4 to 8 layers

thick).

Moisten one section of the wipe with one drop of 99%

alcohol. Be sure that a portion of the wipe remains dry.

Wipe lightly the ferrule tip in the alcohol moistened

portion of the wipe with a figure "8" motion.

Immediately repeat this wiping action on the dry section

of the wipe to remove any residual alcohol.

Do not scrub the fiber against the wipe, doing so can

cause scratches.

Dispose the wipe, NEVER REUSEAWIPE.

Inspect the connector again with a fiberscope.

Repeat the process if necessary.

After the cleaning procedure slide the connector insert

back into the connector housing.

Align the key on the insert to the cutout of the metal

housing.

Tighten the bushing with a max. Torque of 500 Ncm.

Invisible laser radiation may be emitted from

disconnected fibers or connectors. Do not stare into

beams or view directly with optical instruments.

max. Torque

of 500 Ncm

Do not disassemble the OpticalCon cable connector if not necessary.

The automatic sealing shutter of the OpticalCon avoids pollution of the inside located LC connectors.

The dust proof design reduces cleaning to a minimum, if nevertheless necessary be aware that improper cleaning can cause

damage to the equipment.

99% isopropyl alcohol (IPA)

Lint-free wipes

The primary concern with using IPAis that it be removed completely from the LC connector.

If the alcohol is allowed to evaporate slowly of the ferrule, it can leave residual material on the fiber core or cladding.

Tools:

1. Wet cleaning using lint-free wipes:

ASSEMBLY INSTRUCTION

opticalCON

Fiber Optic Connection System

Page 1

Chassis connector maintenanceB.

Cleaning Tool

2.1.

2.2.

2.3.

2.4.

Wet cleaning using lint-free wipes

Dry cleaning using FOCD-SFM-125

Remove LC connectors at the rear of the Opticalcon

chassis and follow the instructions A.1.3 to A.1.9

This cleaning device is especially suggested for

female - male drums as it avoids to open the drum

for cleaning the chassis connector.

Insert the stick of the cleaning device

Make sure that the insertion position is on the

bottom of the LC connector hole in order to hit

the sealing shutter release bar.

Push the cleaning button when completely

inserted

Remove the cleaning device

2.3.

2.2.

2.1.

NEUTRIK AG

NEUTRIK Zürich AG

NEUTRIK USA Inc.

NEUTRIK UK Ltd.

T: F:

() T: F:

USA

+423 / 237 24 24 +423 / 232 53 93

+41 44 / 736 5010 +41 44 / 736 5011

+1 732 / 901 9488 +1 732 / 901 9608

+44 1983 / 811 441 +44 1983 / 811 439

Draft. Nr.: BDA 172 Update: 24..04.2009/ 3102M1421 II

www.neutrik.comwww.neutrik.com

NEUTRIK

NEUTRIK France

NEUTRIK Tokyo Ltd.

NEUTRIK

Vertriebs GmbH T: F:

T: F:

Ltd. T: F:

DE / NL / AT/DK

+49 8131 / 280 890 +49 8131 / 280 830

+33 1 / 4131 6750 +33 1 / 4131 0511

+81 3 / 3663 4733 +81 3 / 3663 4796

+852 / 2687 6055 +852 / 2687 6052

Hong Kong

ASSEMBLY INSTRUCTION I opticalCON

Table des matières

Autres manuels NEUTRIK Câbles et connecteurs

NEUTRIK

NEUTRIK powerCON TRUE1 Guide produit

NEUTRIK

NEUTRIK NAO4MW-A Manuel utilisateur

NEUTRIK

NEUTRIK NC*FRX series Manuel utilisateur

NEUTRIK

NEUTRIK powerCON TRUE1 TOP Manuel utilisateur

NEUTRIK

NEUTRIK NAC3FX-W Guide produit

NEUTRIK

NEUTRIK powerCON TRUE1 Guide produit

NEUTRIK

NEUTRIK opticalCON DRAGONFLY NKO2SMW-XP Series Manuel utilisateur

NEUTRIK

NEUTRIK opticalCON DUO Manuel utilisateur

NEUTRIK

NEUTRIK PowerCON HC Guide de configuration rapide

NEUTRIK

NEUTRIK etherCON TOP Manuel utilisateur

NEUTRIK

NEUTRIK powerCON TRUE1 NAC3MX-W Guide produit

NEUTRIK

NEUTRIK opticalCON HYBRID MED NKO16M-XP-0 Series Guide de configuration

NEUTRIK

NEUTRIK NAC3FX-W Guide produit

NEUTRIK

NEUTRIK etherCON TOP NE8MX-TOP Manuel utilisateur

NEUTRIK

NEUTRIK powerCON TRUE1 TOP Manuel utilisateur

NEUTRIK

NEUTRIK NE8FDY-C6 Manuel utilisateur

NEUTRIK

NEUTRIK FIBERFOX EBC25 Manuel utilisateur

NEUTRIK

NEUTRIK NP2RX-ULTIMATE Manuel utilisateur

NEUTRIK

NEUTRIK PowerCon NAC3MPA Manuel utilisateur

NEUTRIK

NEUTRIK NAC3FX Guide produit

NEUTRIK

NEUTRIK Dual Plug NP3TT-2 Manuel utilisateur

NEUTRIK

NEUTRIK powerCON TRUE1 Guide produit

NEUTRIK

NEUTRIK NAC3MX-W Guide produit

NEUTRIK

NEUTRIK powerCON TRUE1 TOP NAC3MX-W-TOP Manuel

Manuels Câbles et connecteurs populaires d'autres marques

Philips

Philips SWA6310 Manuel utilisateur

StarTech.com

StarTech.com CRJ4550PK Manuel utilisateur

Nohau

Nohau EMUL-IP2K-PC Manuel utilisateur

Foxun

Foxun SX-SP144E-HD4K2K Manuel utilisateur

Philips

Philips SWA3305W Manuel utilisateur

opticis

opticis Stretch DVIM1-1P0x Manuel utilisateur

Volkswagen

Volkswagen VAS 6558A Manuel utilisateur

NEXIBO

NEXIBO N-13 Manuel utilisateur

CYP

CYP PU-1H3HBTL Manuel utilisateur

Allen-Bradley

Allen-Bradley 1784-u2dhp Manuel utilisateur

Global Caché

Global Caché Flex Link Blaster Manuel utilisateur

Hauppauge

Hauppauge USB-Live2 Manuel utilisateur

Fenix

Fenix MPSV 15 Manuel utilisateur

BEGA

BEGA 71 085 Manuel utilisateur

Tesla

Tesla HPWC Manuel utilisateur

GAMERON

GAMERON LUXURY TV CABLE Manuel utilisateur

molex

molex Milli-Grid Dual row 87568 Series Manuel utilisateur

Burndy

Burndy Continental Industries thermOweld CRE-7 Manuel utilisateur

NEUTRIK opticalCON Manuel utilisateur

Manuels Câbles et connecteurs populaires d'autres marques