Neumann.Berlin MA 1 Manuel utilisateur
· . · ·
() / - · - · @. · ..
MA
AUTOMATIC MONITOR ALIGNMENT
I M
.
. /
MA 1 – Automatic Monitor Alignment | 2
MA 1 – Automatic Monitor Alignment.........................................3
Hardware requirements ................................................3
Soware requirements.................................................3
DSP loudspeakers (network-enabled) ....................................3
Analog loudspeakers (not network-enabled) ..............................3
System setup ..............................................................4
Connecting the hardware...............................................4
Setting up the loudspeakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Preparing the MA 1 – Automatic Monitor Alignment ............................7
Starting the process ...................................................7
Selecting the network .................................................7
Checking the requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Selecting and setting up the audio interface ..............................8
Calibrating the MA 1 measurement microphone ..........................10
Selecting the loudspeakers from the network ............................11
Adapting the output level .............................................12
Positioning the microphone and loudspeakers ...........................13
MA 1 input channel ...................................................13
Performing the MA 1 – Automatic Monitor Alignment..........................15
Starting the measurement .............................................15
Displaying the measurement results ....................................16
Saving the results ....................................................19
Contents
MA 1 – Automatic Monitor Alignment | 3
MA 1 – Automatic Monitor Alignment
This document describes the requirements and procedure for using the MA 1 Automatic
Monitor Alignment. This version of the soware just supports stereo systems with and without
subwoofer.
Hardware requirements
• Loudspeakers
• 1 pair of KH DSP loudspeakers
or
• 1 KH 750 DSP subwoofer in combination with a pair of analog KH loudspeakers
• Neumann MA 1 measurement microphone
• Computer (Windows 10 (64 bit), macOS Catalina, 10.13, 10.14 und 10.15)
• Audio interface with:
• Balanced analog input with 48 V phantom power
• 2 balanced analog outputs or digital AES3 output (only with KH 750 DSP)
• Network switch
Soware requirements
• Operating system:
• PC: Windows 10 64 Bit
• Mac: macOS 10.13, 10.14 or 10.15
• MA 1 - Automatic Monitor Alignment soware
• ASIO driver (for Windows)
DSP loudspeakers (network-enabled)
The following loudspeakers and subwoofers are network-enabled and can be controlled
directly by the soware:
• KH 80 DSP
• KH 750 DSP
Analog loudspeakers (not network-enabled)
The following loudspeakers are not network-enabled and need to be connected via a network-
enabled subwoofer in order to be included in the system setup.
• KH 120 A
• KH 120 D
• KH 310 A
• KH 310 D
• KH 420/KH 420 + DIM 1
MA 1 – Automatic Monitor Alignment | 4
System setup
Proceed as follows to set up the system.
Connecting the hardware
XConnect your hardware as shown in this diagram
Setting up the loudspeakers
XSet the switch positions and level adjustments on the rear of your loudspeakers/subwoofer
according to the following instructions.
Analog monitors in combination with KH 750 DSP
(KH 750 DSP + KH 120/KH 310/KH 420)
XUse the following settings for the KH 750 DSP.
MA 1 – Automatic Monitor Alignment | 5
XUse the following settings for analog monitors (KH 120 A, KH 310 A, KH 420)
XUse the following settings for D-version monitors (KH 120 D, KH 310 D, KH 420 with DIM 1)
Note! The digital connection is not supported.
MA 1 – Automatic Monitor Alignment | 6
KH 80 DSP without KH 750 DSP
XUse the following settings for the KH 80 DSP.
KH 80 DSP with KH 750 DSP
XUse the following settings for the KH 80 DSP.
XUse the following settings for the KH 750 DSP.
MA 1 – Automatic Monitor Alignment | 7
Preparing the MA 1 – Automatic Monitor Alignment
Perform the following steps in order to automatically align your setup using the MA 1 soware
and the MA 1 measurement microphone.
Starting the process
XClick on the orange arrow on the right of the start screen to start the process.
Selecting the network
XSelect the network your loudspeakers/subwoofer are connected to.
MA 1 – Automatic Monitor Alignment | 8
Checking the requirements
XEnsure all mentioned requirements are fullled and ticked.
Selecting and setting up the audio interface
Observe the following steps for selecting and setting up the audio interface.
XInstall an ASIO driver on your Windows PC, if not done yet.
If there is no specic ASIO driver available for your audio interface you can try the universal
ASIO4ALL driver instead.
XSelect your audio interface-specic driver in the audio interface selection dropdown.
MA 1 – Automatic Monitor Alignment | 9
XMake sure the sample rate of the audio interface is set to 48 kHz.
You can check the settings of your audio interface via the SETTINGS button.
XTick the Sample Rate 48 kHz checkbox aer verifying the audio interface settings.
XSelect the input channel your MA 1 measurement microphone is connected to.
MA 1 – Automatic Monitor Alignment | 10
XSelect the output channels your loudspeakers or subwoofer are connected to.
Calibrating the MA 1 measurement microphone
XEnter the 10 digit serial number printed on your MA 1 measurement microphone.
XEnter the 6 digit HEX code printed on your MA 1 measurement microphone.
This code provides the microphone-specic calibration information to linearize your
measurement microphone.
Autres manuels pour MA 1
3
Table des matières
Autres manuels Neumann.Berlin Microphone
Neumann.Berlin
Neumann.Berlin KM 183 Manuel utilisateur
Neumann.Berlin
Neumann.Berlin U 47 FET I Manuel utilisateur
Neumann.Berlin
Neumann.Berlin USM 69 i Manuel utilisateur
Neumann.Berlin
Neumann.Berlin M 150 Tube Manuel utilisateur
Neumann.Berlin
Neumann.Berlin U 87 i Manuel utilisateur
Neumann.Berlin
Neumann.Berlin KMS 105 Manuel utilisateur
Neumann.Berlin
Neumann.Berlin U 67 Manuel utilisateur
Neumann.Berlin
Neumann.Berlin TLM 50 Manuel utilisateur
Neumann.Berlin
Neumann.Berlin KMS 104 Manuel utilisateur
Neumann.Berlin
Neumann.Berlin BCM104 Manuel utilisateur
Neumann.Berlin
Neumann.Berlin KMR 82 i Manuel utilisateur
Neumann.Berlin
Neumann.Berlin TLM 107 Manuel utilisateur
Neumann.Berlin
Neumann.Berlin BS 45a Mode d’emploi
Neumann.Berlin
Neumann.Berlin KM-100 System Manuel utilisateur
Neumann.Berlin
Neumann.Berlin TLM 103 D Manuel utilisateur
Neumann.Berlin
Neumann.Berlin M 149 Tube Manuel utilisateur
Neumann.Berlin
Neumann.Berlin KM 185 D Manuel utilisateur
Neumann.Berlin
Neumann.Berlin MM 2 Manuel utilisateur
Neumann.Berlin
Neumann.Berlin Dummy Head KU 100 Manuel utilisateur
Neumann.Berlin
Neumann.Berlin Condenser Microohone Manuel du propriétaire
