⚫Care must be taken that the mains cable is not damaged. If damage is observed
take immediately to an authorized customer service centre to be changed.
⚫Remove mains plug from socket when not in use.
⚫Repairs to electrical parts should only be carried out at an authorized customer
service center.
⚫Do not use spray guns to spray flammable liquids.
⚫Do not clean spray guns with flammable solvents.
⚫Take precautionary measures against potential hazards from spray liquid and
follow any instructions given on containers or laid down by the manufacturer of
liquid.
⚫Do not spray any liquids of unknown hazard potential.
⚫Keep work area clean and will lit.
⚫Do not operate power tools in explosive atmosphere, such as in the presence of
flammable liquids, gases or dust.
⚫Keep children and bystanders away while operating a power tool.
⚫Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools.
⚫Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators.
⚫Do not expose power tools to rain or wet conditions.
⚫Do not abuse the cord. Never use the cord for carrying, pulling or unpulling the
power tool. Keep cord away from heat, oil, sharp edges or moving parts.
⚫When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
⚫Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication.
⚫Use safety equipment. Always wear eye protection.
⚫Avoid accidental starting. Ensure the switch is in the off position before plugging
in.
⚫Remove any adjusting key or wrench before turning the power tool on.
⚫Do not overreach. Keep proper footing and balance at all times.
