NetworkTV NTV73U Manuel utilisateur
N E T W O R K T V
NTV73U & NTV73C
User Guide
Phone: +44 (0) 1425 650697
Release 1.0
www.networktv.tv
2 NTV73U/NTV73C User Guide 1-0
TABLE OF CONTENTS
Preface 3
Notes 4
What’s in the Box 4
Features 5
Product Specification 6
Quick Start 8
IR Remote Controller Explanation 9
RS-232 Interface 11
VISCA Network Configuration 12
Serial Communication Control 13
Command List 13
Menu Setting 14
USB3.0 19
Maintenance and Troubleshooting 20
www.networktv.tv
NTV73U/NTV73C User Guide 1-0 3
Thank you for choosing this USB3.0 HD Video Conferencing Camera.
This manual introduces the function, installation and operation of the HD camera. Prior to installation and
usage, please read the manual thoroughly.
Precautions
This product can only be used in the specified conditions in order to avoid any damage to the camera:
Don’t subject the camera to rain or moisture.
Don’t remove the cover. Otherwise, you may get an electric shock. In case of abnormal operation, contact
the authorized engineer.
Never operating under unspecified temperature , humidity and power supply.
Please use a soft dry cloth to clean the camera. If the camera is very dirty, clean it with diluted neutral
detergent; do not use any type of solvents, which may damages the surface.
Note
This is class A product. Electromagnetic radiation at the specific frequency may affect the image quality of TV
in a home environment
Copyright Notice
All contents of this manual is copyright and belongs to our Company. It cannot be cloned, copied or trans-
lated without the permission of the company. Product specifications and information which are referred to in
this document are for reference only and the content may be updated at any time without prior notice.
Preface
www.networktv.tv
4 NTV73U/NTV73C User Guide 1-0
Notes
Electrical Safety
Installation and operation must be in accordance with the local electric safety standards.
Caution with handling
Avoid stress, vibration and moisture in transport, storage, installation and operation.
Polarity of power supply
The power supply of the product is +12V, the maximum electrical current is 2A. Polarity of the power
supply plug is as per the drawing:
Care during installation
Do not grasp the camera head when carrying the camera. Don’t turn camera head by hand. Doing so
may result in mechanical damage.
Don’t apply corrosive liquid, gas or solid environment to avoid damaging the cover which is made
of plastic material.
Make sure no obstacle is in the rotation range.
Never power off before installation is completed.
Don’t dismantle the camera
We are not responsible for any unauthorized modification or dismantling.
CAUTION!
The specific frequency of electromagnetic field may affect the image of the camera!
What’s in the Box
When you unpack, check that all the supplied accessories are included:
Camera 1PCS
AC power adaptor 1PCS
Power cord 1PCS
RS232 cable 1PCS
Remote controller 1PCS
USB3.0 or USB2.0 1PCS
www.networktv.tv
NTV73U/NTV73C User Guide 1-0 5
Features
Completely New Look
Designed with worm gear drive, completely new look, mini size.
Full Function USB Interface
Full function USB interface, compatibility with USB3.0 and USB2.0, audio support, support for com-
pressed video output, support UVC, UAC protocol.
Built-in Microphone (Optional)
Built-in microphone for optional, pickup distance up to 5 metres, high sensitivity and low base noise.
1080P Full HD
Panasonic's 1/2.7 inch, 2.07 million effective pixels high quality HD CMOS sensor, can reach maximum
1920 x 1080 resolution image quality.
Ultra-high Frame Rate
The output frame rate up to 60fps in 1080P.
72.5° Wide-angle Lens + 32x Digital Zoom
72.5° wide-angle high quality lens, supports 12x optical zoom, and 32x digital zoom (optional).
Low-light
High SNR of CMOS sensor combined with 2D and 3D noise reduction algorithym, effectively reduces
the noise, even under low illumination conditions, the picture will still stay clean and clear.
Remote Control
Using RS232/RS485 and USB interface, all the parameters of the camera can be remote controlled.
www.networktv.tv
6 NTV73U/NTV73C User Guide 1-0
Model NTV73U NTV73C (in red)
Name USB3.0 HD Video Conference Camera (USB2.0)
Camera
Video System 1080p/60, 1080p/50, 1080p/30, 1080p/25, 720p/60,
720p/50, 720p/30, 720p/25
Sensor 1/2.7'', CMOS, Effective Pixel: 2.07M
Scanning Mode Progressive
Lens 12x, f3.5mm ~ 42.3mm, F1.8 ~ F2.8
Digital Zoom 32x 16x
Minimal Illumination 0.5 Lux @ (F1.8, AGC ON)
Shutter 1/30s ~ 1/10000s
White Balance Auto, Indoor, Outdoor, One Push, Manual
Backlight Compensation Support
Digital Noise Reduction 2D&3D Digital Noise Reduction
Video S/N ≥55dB
Horizontal Angle of View 72.5° ~ 6.9°
Vertical Angle of View 44.8° ~ 3.9°
Horizontal Rotation Range ±170°
Vertical Rotation Range -30° ~ +30° ±25°
Pan Speed Range 1.7° ~ 100°/s
Tilt Speed Range 1.7° ~ 69.9°/s 0.7° ~ 28°/s
Horizontal & Vertical Flip Support
Image Freeze Support
Number of Preset 255
Preset Accuracy 0.1°
USB Features
Operating System Windows XP, Windows Vista, Windows 7, Windows 8,
Mac OS X, Linux
Color System/Compression YUV 4:2:2 / H.264 / MJPEG
Product Specification
www.networktv.tv
NTV73U/NTV73C User Guide 1-0 7
Product Specification (cont.)
Video Format USB3.0: 1080p/60, 1080p/50, 1080p/30, 1080p/25,
720p/60, 720p/50, 720p/30, 720p/25
USB2.0: 1080p/30, 1080p/25, 1080p/15, 1080p/10,
720p/30, 720p/25, 960x540p/30, 960x540p/25,
640x360p/60, 640x360p/50
Audio on USB Support
USB Video Communication Protocol UVC 1.0 ~ UVC 1.5
UVC PTZ Support
Input/Output Interface
USB Interface 1xUSB3.0:Type B female jack 1xUSB2.0: Type B female
Audio Interface 1-ch: 3.5mm Audio Interface, Line In
Communication Interface 1xRS232 In: 8pin Min DIN, Max Distance: 30m, Proto-
col: VISCA/Pelco-D/Pelco-P
1xRS232 Out: 8pin Min DIN, Max Distance: 30m, Proto-
col: VISCA network use only
1xRS485: Share with RS232 Out, Max Distance: 1200m,
Protocol: VISCA/Pelco-D/Pelco-P
Power Jack JEITA type (DC IN 12V)
Generic Specification
Input Voltage DC 12V
Current Consumption 1.0A (Max)
Operating Temperature -10°C ~ 40°C (14°F ~ 104°F)
Storage Temperature -40°C ~ 60°C (-40°F ~ 140°F)
Power Consumption 12W (Max)
MTBF >30000h
Size 128.5x118x156.2mm
Net Weight 0.91K g
www.networktv.tv
8 NTV73U/NTV73C User Guide 1-0
1. USB3.0 4. RS232 out Interface
2. Line in Interface 5.DC IN 12V jack
3. RS232 IN Interface
Quick Start
1. USB2.0 4. RS232 out Interface
2. Line in Interface 5.DC IN 12V jack
3. RS232 IN Interface
1 2 3 4 5
Step1: Please check connections are correct before starting
Step2: Power connected to the Camera, the front panel power lamp is lit.
Step3: Pan-Tilt will rotate to the maximum position of top right after the camera is started, then it will return
to the centre, the process of initialization is then complete. (Note: If the position preset 0 has been stored,
the position preset 0 will be called up after initialization).
www.networktv.tv
NTV73U/NTV73C User Guide 1-0 9
IR Remote Controller Explanation
1. Standby Button
Press this button to enter standby mode. Press it again to
enter normal mode. (Note: Power consumption in
standby mode is approximately half of the normal mode)
2. Position Buttons
To set preset or call preset
3. *Button
Used with other buttons
4. Set/Preset Buttons
Set preset: Store a preset position
[SET PRESET] + Numeric button (0-9): Setting a corre-
sponding numeric key preset position
5. Pan-Tilt control Buttons
Pressing the Pan-Tilt back to the middle position
6. MENU
MENU: enter or exit OSD MENU
7. Zoom Buttons
Slow Zoom: Zoom In [+] or Zoom Out [-] slowly
Fast Zoom: Zoom In [+] or Zoom Out [-] fast
8. Pan-Tilt L/R set
Press with 1 buttons and 2 buttons setting the direction
of the Pan-Tilt
L/R Set +1[STD]: set the Pan-Tilt turn the same direction
as the L/R Set
L/R Set +2[REV]: set the Pan-Tilt turn the opposite direc-
tion as the L/R Set
9. Focus Buttons
Used for focus adjustment.
Press [AUTO] adjust the focuses on the center of the ob-
ject automatically. To adjust the focus manually. Press
[MANUAL] adjust the focus on the center of the object
manual
MANUAL button, and adjust it with [Far] (Focus on far
object) and [NEAR] (Focus on near object)
www.networktv.tv
10 NTV73U/NTV73C User Guide 1-0
10. Camera Select Buttons
Press the button corresponding to the cam-
era you want to operate with the remote
controller.
11. # Button
Used with other buttons
12. Set Camera IR Address Buttons
[*]+[＃]+[F1]: Address1
[*]+[＃]+[F2]: Address2
[*]+[＃]+[F3]: Address3
[*]+[＃]+[F4]: Address4
13. Clear Preset Buttons
Clear preset: Erase a preset position
[CLEAR PRESET] + Numeric button (0-9)
Or: [*]+[#]+[CLEAR PRESET]: Erase all the pre-
set individually
14. Pan/Tilt Control Buttons
Press arrow buttons to perform panning and
tilting. Press [HOME] button to face the cam-
era back to front
15. Back buttons
Press the OSD menu return to the superior.
[*]+[＃]+[9]: Quickly set up inversion
16. BLC (Backlight Compensation) Button
BLC ON/OFF: Press this button to enable the
backlight compensation. Press it again to dis-
able the backlight compensation.(NOTE: Ef-
fective only in auto exposure mode)
Note: If there is light behind the subject, the
subject will become dark. In this case, press the
backlight ON / OFF button. To cancel this func-
tion, press the backlight ON / OFF button.
17. Pan/Tilt reset
Preset Pan/Tilt self-test.
18. Image freezing function
Manually freeze: Open the freezing function
after press the remote control [F4], display
"Freeze" on the left upper corner character,
after 5 seconds display disappear auto mati-
cally. If you want to cancel the freeze, press
[F4] key and then can return to normal, display
"Unfreeze" on the left upper corner, after 5
seconds the display will disappear automati-
cally.
Recalling the Preset image Freeze：By the OSD
Menu Setting "Recalling the Preset image
Freeze" function. After the function is opened,
the screen will stay in before Recalling the Pre-
set when Recalling the Preset, the screen can
be switched to the preset position screen until
the camera points to the preset position.
19. Shortcut Set
[*]+[＃]+[1]: OSD menu default English
[*]+[＃]+[3]: OSD menu default Chinese
[*]+[＃]+[4]: Default IP address
[*]+[＃]+[5]: Save OSD
[*]+[＃]+[6]: Quickly recover the default
[*]+[＃]+[8]: Look the camera version
[*]+[＃]+[9]: Quickly set up inversion
IR Remote Controller Explanation (cont.)
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels NetworkTV Webcam
