Network Technologies SM-nXm-AV-LCD Manuel utilisateur

MAN069 Rev Date 7/19/2007

SM-nXm-AV-LCD

Audio/Video Matrix Switch

Installation and Operation Manual

EEMUX®

Series

NETWORK

TECHNOLOGIES

INCORPORATED

Tel:330-562-7070

Fax:330-562-1999

1275 Danner Dr

Aurora, OH 44202

www.networktechinc.com

NTI R

TRADEMARK

VEEMUX is a registered trademark of Network Technologies Inc in the U.S. and other countries.

in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,

without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202.

CHANGES

The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the

right to make changes in the product design without reservation and without notification to its users.

SOFTWARE VERSIONS

Front Panel LCD Software Version 1.2

Ethernet Control Software Version 1.16

TABLE OF CONTENTS

Introduction.................................................................................................................................................................... 1

Basic Operation ........................................................................................................................................................... 1

Supported Web Browsers............................................................................................................................................ 1

Ordering Information.................................................................................................................................................... 1

Optional Features ..................................................................................................................................................... 1

Materials ...................................................................................................................................................................... 2

Cables.......................................................................................................................................................................... 2

Default User Name and Passwords ............................................................................................................................ 2

Features and Functions................................................................................................................................................ 3

Installation...................................................................................................................................................................... 4

Connect the Sources ................................................................................................................................................... 4

Connect the Monitors and Speakers ........................................................................................................................... 5

Connect RS232 ........................................................................................................................................................... 5

Connect to the Ethernet............................................................................................................................................... 6

Power Up ..................................................................................................................................................................... 6

LED Matrix...................................................................................................................................................................... 6

Control Options ............................................................................................................................................................. 7

Front Panel LCD with Keypad Control......................................................................................................................... 7

Making Connections ................................................................................................................................................. 7

Volume Control ......................................................................................................................................................... 8

Memory Functions .................................................................................................................................................... 8

Menu Button.............................................................................................................................................................. 9

Scan Mode................................................................................................................................................................ 9

RS232 Control.............................................................................................................................................................. 10

Remote Connection ................................................................................................................................................... 10

Baud Rate ............................................................................................................................................................... 10

Unit Address ........................................................................................................................................................... 10

Command Protocol .................................................................................................................................................... 11

Autostatus............................................................................................................................................................ 12

Matrix Switcher’s Control Program For Windows 9X, NT, 2000, XP and Vista ........................................................ 13

SerTest- RS232 Interface Test Program ................................................................................................................... 13

Main Options........................................................................................................................................................... 13

Matrix Operations.................................................................................................................................................... 13

Ethernet Operations................................................................................................................................................ 14

Setup Options ......................................................................................................................................................... 14

Ethernet Control .......................................................................................................................................................... 14

Telnet Interface-Port 2000 ......................................................................................................................................... 14

Telnet Interface-Port 2005 ......................................................................................................................................... 16

Command Summary............................................................................................................................................... 16

Command Detail ..................................................................................................................................................... 17

RU-Read Unit Size .............................................................................................................................................. 17

RO-Read Connection for Output Port ................................................................................................................. 17

CS- Connect Output Port to Input Port................................................................................................................ 17

CA- Connect All Output Ports to Input Port ......................................................................................................... 17

SS_01- Enable Auto Status Mode....................................................................................................................... 18

SS_00- Disable Auto Status Mode...................................................................................................................... 18

SX- Examine connections ................................................................................................................................... 18

AO-Read Audio Connection for Output Port ....................................................................................................... 19

AS-Connect Audio Output Port to Input Port....................................................................................................... 19

AA-Connect All Audio Outputs to Input Port........................................................................................................ 19

AV- Set Audio Volume for Output Port ................................................................................................................ 20

AM- Mute/Unmute Audio Output Port.................................................................................................................. 20

Terminate telnet session ..................................................................................................................................... 20

AR- Read Mute and Volume for Audio Output Port ............................................................................................ 21

Web Interface ............................................................................................................................................................ 22

Enter the Password ................................................................................................................................................ 22

Video Switch Page .............................................................................................................................................. 23

Audio Switch Page .............................................................................................................................................. 25

iii

Setup Pages ........................................................................................................................................................ 26

Input Names ........................................................................................................................................................ 27

Output Names...................................................................................................................................................... 27

Outputs Scanning Sequences............................................................................................................................. 28

Update Firmware ................................................................................................................................................. 30

Change Password Page...................................................................................................................................... 31

Help Page............................................................................................................................................................ 31

Update Web Server ............................................................................................................................................. 31

Logout Page ........................................................................................................................................................ 32

Device Discovery Tool ................................................................................................................................................ 33

Infrared Control ........................................................................................................................................................... 34

Features And Functions............................................................................................................................................. 34

KEYPAD ................................................................................................................................................................. 34

LCD Display ............................................................................................................................................................ 34

How To Use The IRT ................................................................................................................................................. 35

Change the Switch.................................................................................................................................................. 35

Change Output Port................................................................................................................................................ 36

Change Input Port................................................................................................................................................... 36

Set Configuration .................................................................................................................................................... 37

Battery Replacement ................................................................................................................................................. 38

Specifications............................................................................................................................................................. 38

Troubleshooting ......................................................................................................................................................... 38

DDC Support................................................................................................................................................................ 39

RS232 Upgrade OF the Front Panel LCD Firmware................................................................................................. 40

RS232 Connection Cables.......................................................................................................................................... 42

Pinout of RS232 port on VEEMUX-A ........................................................................................................................ 42

Specifications for Straight-Through Serial Cable for CPU Connection ..................................................................... 42

Pinout for Matrix-Y-1 Cable ....................................................................................................................................... 43

Rack Mounting Instructions ....................................................................................................................................... 43

Specifications .............................................................................................................................................................. 44

Troubleshooting .......................................................................................................................................................... 45

Safety Statements ....................................................................................................................................................... 45

Index ............................................................................................................................................................................. 45

Warranty Information .................................................................................................................................................. 46

TABLE OF FIGURES

Figure 1- Install Audio and Video Source Cables .............................................................................................................................. 4

Figure 2- Install Monitors and Speakers ............................................................................................................................................5

Figure 3- Connect user terminal for RS232 control............................................................................................................................ 5

Figure 4- Connect the LAN to the VEEMUX-A...................................................................................................................................6

Figure 5- LED Matrix showing input 5 connected to output 5.............................................................................................................6

Figure 6- RS232 Connections for Daisy-chain................................................................................................................................. 10

Figure 7- Web interface Welcome page......................................................................................................................................... 22

Figure 8- Web interface Login Prompt ............................................................................................................................................. 22

Figure 9- Web interface Video Switch page..................................................................................................................................... 23

Figure 10- Web interface Audio Switch page................................................................................................................................... 25

Figure 11- Web interface Setup page .............................................................................................................................................. 26

Figure 12- Web interface Serial Setup page .................................................................................................................................... 26

Figure 13- Web interface Video Input Names page ......................................................................................................................... 27

Figure 14- Output Port Names......................................................................................................................................................... 27

Figure 15- Outputs Scanning Sequences page ............................................................................................................................... 28

Figure 16- Web interface Update Firmware page ............................................................................................................................ 30

Figure 17- Web interface Password page........................................................................................................................................ 31

Figure 18- Updating the Web Server ............................................................................................................................................... 31

Figure 19- Web interface Logout page............................................................................................................................................. 32

Figure 20- Device Discovery Tool page ........................................................................................................................................... 33

NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH

INTRODUCTION

The SM-nXm-AV-LCD Audio/Video Matrix switch (VEEMUX-A) allows up to 32 audio/video sources (n) to be connected to up to

16 destinations (m). Different destinations can even be connected to the same source. Video resolution up to 1920x1200@85Hz

is supported with no degradation – guaranteed. Stereo audio is supported, as well as volume control and separate audio/video

switching. An LCD on the front panel indicates the current connections. The VEEMUX-A can be controlled by four methods: Front

Panel LCD with Keypad, RS232 interface, Ethernet, or optional Infrared Remote.

Basic Operation

The VEEMUX-A allows any source to be connected to any destination at any time with no restrictions or limitations.

•Audio and Video connections can be made concurrently or separately (i.e. user 1 can view video from port 3

and hear audio from port 11).

•Video inputs accept any RGBHV, RGBS, or RGsB signal.

•Video outputs are compatible with any RGBHV or RGBS monitor, regardless of input. (RGsB monitor requires

RGsB input)

•Audio inputs accept any standard line level audio (1Vrms or 2.5Vp-p).

•Audio outputs are capable of driving an 8 Ohm speaker load with 200mW of continuous RMS power.

•The Audio output volume of the AV matrix is adjustable for each output port.

Supported Web Browsers

Most modern web browsers should be supported. The following browsers have been tested:

•Microsoft Internet Explorer 6.0 or higher

•Netscape 7.0 or higher

•Mozilla FireFox 0.9.2 or higher

Set your browser to always check if there is a newer version of the page than the version stored in cache. This action will ensure

that it will display the most up-to-date information.

Ordering Information

The SM-nXm-AV-LCD Audio/Video Matrix switch (VEEMUX-A) can be ordered in many sizes and with several control options.

The base unit includes a user keypad and an RS232 port to make up a complete system, with an option for an infrared control.

The infrared option is purchased separately, allowing for maximum user satisfaction in each unique configuration.

The VEEMUX-A Audio/Video Matrix switch is built to a specific size ranging from 8 to 32 inputs and 2, 4, 8, 12, or 16 outputs.

Simply order a SM-nXm-AV-LCD where the “n” in the part number represents the number of inputs and the “m” in the part number

represents the number of outputs.

SM-nXm-AV-LCD

Replace the “n” with 8,16, or 32

Replace the “m” with 2,4,8,12, or 16

The following list represents the available sizes that can be ordered:

SM-8x2-AV-LCD SM-16x4-AV-LCD SM-32x2-AV-LCD

SM-8x4-AV-LCD SM-16x8-AV-LCD SM-32x4-AV-LCD

SM-8x8-AV-LCD SM-16x12-AV-LCD SM-32x8-AV-LCD

SM-16x2-AV-LCD SM-16x16-AV-LCD SM-32x16-AV-LCD

Optional Features

•DDC Support (see page 39)- to order, add "D" to the part number (i.e. SM-nXm-AVD-LCD)

•Infrared Control (see page 34)- to order, add "IR" to the part number (i.e. SM-nXm-AV-LCD-IR)

NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH

Materials

Materials Supplied with this kit:

•NTI SM-nXm-AV-LCD Audio/Video Matrix switch

•IEC Line cord, country specific

•4- #10-32 x 3/4" pan head screws and 10-32 cagenuts (server cabinet mounting hardware)

•CD with: a pdf file of this owner's manual

the NTI Discovery Tool

the Matrix Switcher’s Control Program

Cables

All cables are sold separately. The following table lists the available stocked cables with their length in feet. All of the 15HD and

BNC input and output connectors on VEEMUX-A are female. Custom cables are available – contact NTI for pricing and distance /

resolution limitations.

NTI NAME DESCRIPTION

VGA

VEXT-3/6/10/15/25/35/50/75/100-MM

VEXT-3/6/10/15/25/35/50/75/100

VINT-5B-6

Multi-coax high resolution VGA or SVGA video cable. Connectors are 15HD

male-male (used for INPUTS)- 3 thru 100 feet

Multi-coax high resolution VGA or SVGA video cable. Connectors are 15HD

male-female (used for OUTPUTS)- 3 thru 100 feet

Multi-coax high resolution VGA to BNC cable. Connectors are 15HD male to 5

BNC’s- 6 feet long

AUDIO

SA-6/10/15/25/35/50-MM

Audio Interface Cable- Connectors are 3.5mm male-male - 6/10/15/25/35/50

feet long

RS232

Matrix-Y-1 or see page 42 for alternative

cables

RS232 Interface Cable- Connectors are 9D male- female-female 12" long

(also see alternative cable specifications on page 42)

ETHERNET

Contact NTI for various lengths and colors Cat5 UTP Cable- Connectors are RJ45 male-Stocked cables are 2 thru 100 feet

Custom cables must have RJ45 connectors wired straight thru- pin 1 to pin 1,

etc.

Default User Name and Passwords

The default Telnet password is admin (lower case letters only) . For instruction on using Telnet, see page

14.

(No username is required in order to use Telnet. You will only be prompted for a password.)

The default Web Interface user name is Administrator (upper case letter for "A" only).

The default Web Interface password is admin (lower case letters only). For instruction on using the Web

Interface, see page 22.

NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH

FEATURES AND FUNCTIONS

1. LCD Display- for visual indication of input-to-output connections and for configuration of the VEEMUX.

2. Keypad- buttons for user control over switch functions

3. AUDIO IN- for connection of audio cables from audio sources

4. AUDIO OUT- for connection of audio cables to audio output devices (speakers)

5. Power ON/OFF switch

6. IEC Power Connector- for attachment of power cord (not available on all units)

7. Fuse Holder- holder for replaceable overcurrent 2A 240VAC Fast-blo protection fuse

8. RS232 In/Out - 9D female connector- for attaching RS232 interface cable from a user terminal

9. VIDEO x- 15HD female connectors- for attachment of video cables from video sources

10. MONITOR x- 15HD female connectors- for connection of video output devices

11. DDC button- for manual update of DDC information between the monitor and the source(s) attached (optional)

12. LED Matrix- for visual indication of all input-to-output connections (page 6) (not available on all models)

13. ETHERNET- RJ45 female connector- for connection of CAT5 cable to Local Area Network (LAN) for WEB interface

MONITOR 1

MONITOR 2

MONITOR 3

MONITOR 4

VIDEO 1

VIDEO 2

VIDEO 3

VIDEO 4

VIDEO 5

VIDEO 6

VIDEO 7

VIDEO 8

MONITOR 5

MONITOR 6

MONITOR 7

MONITOR 8

NTI NETWORK

TECHNOLOGIES

INCORPORATED

Tel:330-562-7070

Fax:330-562-1999

1275 Danner Dr

Aurora, OH 44202

www.nti1.com

AUDIO IN (CPU)

AUDIO OUT (USER)

ETHERNET

Rear View of VEEMUX-A

678 10

Front View of VEEMUX-A

123

IN 4 5

6 7 89*

ESC

ENTER

NTIR

Networ k Technol ogies Inc VEEMUX A

OUT 0

1 234 6 78

OUT

DDC

121112

NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH

INSTALLATION

Connect the Sources

1. Turn OFF power to all video sources (inputs) that will be connected to the VEEMUX-A before connecting or

disconnecting any cables.

2. For each video source, connect a VEXT-xx-MM cable from the video port of the source to a video input

("VIDEO 1") of the VEEMUX-A (see Fig. 1).

3. For each audio source, connect a SA-xx-MM cable from the audio source to an audio input ( "AUDIO IN ") port.

Notes:

The audio port on a CPU may be marked "line out", "spkr", or "headphones". If all 3 jacks are available, use

the jack marked "line out".

The "line out" jack is typically lime green and may be marked with this symbol

The "spkr" jack is typically orange, and may be marked with this symbol

The "headphones" jack may be marked with this symbol

Figure 1- Install Audio and Video Source Cables

MONITOR 1

MONITOR 2

MONITOR 3

MONITOR 4

VIDEO 1

VIDEO 2

VIDEO 3

VIDEO 4

VIDEO 5

VIDEO 6

VIDEO 7

VIDEO 8

MONITOR 5

MONITOR 6

MONITOR 7

MONITOR 8

NTI NETWORK

TECHNOLOGIES

INCORPORATED

Tel:330-562-7070

Fax:330-562-1999

1275 Danner Dr

Aurora, OH 44202

www.nti1.com

AUDIO IN (CPU)

AUDIO OUT (USER)

ETHERNET

Rear View of VEEMUX-A

15HD Male

Video Connector

15HD Female

Video Connector

15HD Female

Video Connector

Video Port

Rear View of a CPU

3.5mm Stereo

Plug

3.5mm Stereo

Plug

SA-xx-MM

Audio Port

line

out

ONE WILL BE MARKED "line

out" ,"spkr", "headphones"

OR WITH THIS SYMBOL

HD15-Male HD15-Male

VEXT-xx-MM

NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH

MONITOR 1

MONITOR 2

MONITOR 3

MONITOR 4

VIDEO 1

VIDEO 2

VIDEO 3

VIDEO 4

VIDEO 5

VIDEO 6

VIDEO 7

VIDEO 8

MONITOR 5

MONITOR 6

MONITOR 7

MONITOR 8

NTI NETWORK

TECHNOLOGIES

INCORPORATED

Tel:330-562-7070

Fax:330-562-1999

1275 Danner Dr

Aurora, OH 44202

www.nti1.com

AUDIO IN (CPU)

AUDIO OUT ( USE R)

ETHE RNET

VGA

Multi-Scan

Monitor

User Terminal

9D-male

RS232 connector

Rear View of VEEMUX-A

Connect the Monitors and Speakers

1. Connect a video output device to the port labeled MONITOR 1 on the rear of the VEEMUX-A (see Fig. 2).

2. Repeat step 6 for remaining output devices (monitors).

3. Connect audio output device (speakers) to port labeled AUDIO OUT 1.

4. Repeat step 8 for remaining audio output devices, connecting them to any remaining AUDIO OUT ports.

Figure 2- Install Monitors and Speakers

Connect RS232

RS232 control can be achieved using a

separate user terminal or CPU with a

terminal program.

To make a terminal connection, connect a

serial cable (specifications on page 42)

between the user terminal and the 9 pin

DIN female connector on the VEEMUX-A

labeled "RS232". (See Fig. 3)

Figure 3- Connect user terminal for RS232 control.

MONITOR 1

MONITOR 2

MONITOR 3

MONITOR 4

VIDEO 1

VIDEO 2

VIDEO 3

VIDEO 4

VIDEO 5

VIDEO 6

VIDEO 7

VIDEO 8

MONITOR 5

MONITOR 6

MONITOR 7

MONITOR 8

NTI NETWORK

TECHNOLOGIES

INCORPORATED

Tel:330-562-7070

Fax:330-562-1999

1275 Danner Dr

Aurora, OH 44202

www.nti1.com

AUDIO IN (CPU)

AUDIO OUT (USER)

ETHERNET

Rear View of VEEMUX-A

VGA

Multi-Scan

Monitor

15HD Male

Video Connector

15HD Female

Video Connector

Speakers

3.5mm Stereo

Jack

3.5mm Stereo

Plug

NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH

Connect to the Ethernet

If the Telnet Interface (page 14) or Web Interface (page 22) will be used, an Ethernet connection to the Local Area Network (LAN)

must be made using Cat5 cable with RJ45 connectors attached. Wiring between connectors should be straight through (pin 1 to

pin 1, pin 2 to pin 2, etc..) Connect a Cat5 cable between the connector labeled "ETHERNET" and the LAN (see Fig. 4).

Figure 4- Connect the LAN to the VEEMUX-A

Power Up

1. Plug the VEEMUX-A to an AC power outlet.

2. Turn ON power to the VEEMUX-A.

3. Turn ON power to any or all of the video and/or audio sources connected to the VEEMUX-A.

LED MATRIX

(not available on all models)

The LED Matrix is a grid of LEDs on the front panel of the VEEMUX-A. This grid is used to provide a visual indication of all

connections between video sources and destinations. It is not an indication of audio connections. To determine if an input

(video source) is connected to an output (video destination), follow the LEDs down and to the right (respectively) until they

intersect. The illuminated LED at the point of intersection indicates the input is connected to the output by the VEEMUX-A.

Figure 5- LED Matrix showing input 5 connected to output 5

1234 678

OUT

MONITOR 1

MONITOR 2

MONITOR 3

MONITOR 4

VIDEO 1

VIDEO 2

VIDEO 3

VIDEO 4

VIDEO 5

VIDEO 6

VIDEO 7

VIDEO 8

MONITOR 5

MONITOR 6

MONITOR 7

MONITOR 8

NTI NETWORK

TECHNOLOGIES

INCORPORATED

Tel:330-562-7070

Fax:330-562-1999

1275 Danner Dr

Aurora, OH 44202

www.nti1.com

AUDIO IN (CPU)

AUDIO OUT (USER)

ETHERNET

RJ45 male

connector

LAN

Rear View of VEEMUX-A

Autres manuels pour SM-nXm-AV-LCD

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Network Technologies Commutateur matriciel

Network Technologies

Network Technologies SM-nXm-AV-LCD Manuel utilisateur

Network Technologies

Network Technologies VEEMUX SM-nXm-15V-LCD Manuel utilisateur

Network Technologies

Network Technologies VEEMUX SM-nXm-DVI-LCD Manuel utilisateur

Network Technologies

Network Technologies VEEMUX SM-nXm-15V-LC Manuel utilisateur

Manuels Commutateur matriciel populaires d'autres marques

Broadcast Tools

Broadcast Tools SS 8.2 Manuel utilisateur

Altimium

Altimium MATF32 Manuel utilisateur

ALFAtron

ALFAtron ALF-MUK44N Manuel utilisateur

Monoprice

Monoprice Blackbird 15377 Manuel utilisateur

Kramer

Kramer XL 3216VS Manuel utilisateur

PTN

PTN FMX12 Manuel utilisateur

CYP

CYP nT15GX01 Manuel utilisateur

Kramer

Kramer VP-2x2 Manuel utilisateur

Kramer

Kramer Sierra Video 6432V5xl Manuel utilisateur

TESmart

TESmart HMA0402A40 Manuel utilisateur

Octava

Octava HD4XSTPMX Manuel utilisateur

Intelix

Intelix FLX-88 Mode d'emploi

Kramer

Kramer LASSEN XL 3232S Manuel utilisateur

Roland

Roland XS-1HD Manuel utilisateur

Kramer

Kramer VS-66HDCPxl Manuel utilisateur

Atlona

Atlona AT-HDMI-22M Manuel utilisateur

Link

Link HD8X8 Manuel utilisateur

AMX

AMX AVS-OP-2020-117 Instructions et recettes