Modular Telecom Router Rev. 4
1Product overview
The Modular Telecom Router is part of the VikinX®Modular product range,
offering up to 128x128 crosspoints for ITU G.703 CMI coded 140/155 Mbps
telecom signals.
This top of the line router provides a very compact frame, fully hot-swappable
architecture, built-in dual redundant power supply and fully redundant
controller functions.
Starting with the size of 32x32, the router can be expanded under operation
with 32x32 increments. Advanced control features like TCP/IP interface and
SNMP agent, as well as comprehensive surveillance of the router’s vital
parameters are possible via the well known GYDA-128 controller.
As for our well known VikinX®compact router series low power consumption
has been important.
VikinX®Modular provides a fully hot-swappable architecture, meaning that all
components are front loaded without any active components on the rear
panel.
VikinX®Modular provides all important 3rd party control interfaces allowing
the control of our routers through 3rd party management software. On top of
that does the Network Electronics’ THOR management package allow control
of the most common 3rd party routers. This enables you to utilise existing
routers and management systems from other manufacturers and still draw the
advantages of implementing VikinX®Modular in your routing application.
1.1 Product versions
The following versions of the VikinX®Modular Telecom Router are available:
140/155 Mbps Telecom router - 9RU:
T3232-140/155M VikinX®Modular router for Telecom rates 140/155 Mbps,
Non-reclocking, 9RU, equipped 32x32, expandable up to
128x128 in steps of 32x32.
T6464-140/155M As above, but equipped 64x64.
T9696-140/155M As above, but equipped 96x96.
T128128-140/155M As above, but fully equipped 128x128.
140/155 Mbps Telecom router - 5RU:
T3232-140/155S VikinX®Modular router for Telecom rates 140/155 Mbps,
Non-reclocking, 5RU, equipped 32x32, expandable up to
64x64 in steps of 32x32.
T6464-140/155S As above, but fully equipped 64x64.
8
