Netvox R831D Manuel utilisateur

Model：R831D

Wireless Relay Switch Control

R831D

User Manual

This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict

confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX Technology. The

specifications are subject to change without prior notice.

Table of contents

1. Introduction ................................................................................................................ 2

2.Appearance.................................................................................................................. 3

3.Main Features..............................................................................................................4

4. Set up Instruction........................................................................................................ 5

5. Data Report................................................................................................................. 6

6. Installation................................................................................................................ 10

7. Maintenance and maintenance ................................................................................. 11

1.Introduction

The R831D is a Wireless Relay Switch Control device for Netvox Class C type devices based on the LoRaWAN open protocol and is

compatible with the LoRaWAN protocol.

R831D is designed to control switch devices, mainly for electrical appliances. R831D allows you to connect and control 3 buttons

and 3 dry contacts. The connected buttons and dry contacts will not affect each other. It will report 3 relay status and 3 input status.

LoRa Wireless Technology:

LoRa is a wireless communication technology famous for its long-distance transmission and low power consumption. Compared

with other communication methods, LoRa spread spectrum modulation technique greatly extend the communication distance. It can

be widely used in any use case that requires long-distance and low-data wireless communications. For example, automatic meter

reading, building automation equipment, wireless security systems, industrial monitoring. It has features like small size, low power

consumption, long transmission distance, strong anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability between devices and

gateways from different manufacturers.

2.Appearance

Port 1

N/A

Port 2

First load

Port 3

First load

Port 4

Second load

Port 5

Second load

Port 6

Third load

Port 7

Third load

Port 8

GND

Port 9

12v

R831D

DIP SW

off

1~3

DIP Switch

(Change R831 series mode)

N/A

GND

input 1

input 2

input 3

Network Indicator

Status Indicator

DIP Switch

Function Key

3.Main Features

⚫Apply SX1276 wireless communication module

⚫Three relays switch dry contact output

⚫Compatible with LoRaWANTM Class C

⚫Frequency hopping spread spectrum

⚫Configuration parameters can be configured via a third-party software platform, data can be read and alerts can be set via SMS text

and email (optional)

⚫Applicable to third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne

⚫Improved power management for longer battery life

Battery Life:

⁻Please refer to web: http://www.netvox.com.tw/electric/electric_calc.html

⁻At this website, users can find battery life time for variety models at different configurations.

1. Actual range may vary depending on environment.

2. Battery life is determined by sensor reporting frequency and other variables.

4. Set up Instruction

On/Off

Power on

External 12V power supply

Turn on

After plug the power, the status indicator will stay on, it means the boot is successful.

Restore to factory setting

Press and hold the function key for 5 seconds till the status indicator flashes for 20 times.

Power off

Remove power

Note:

Press and hold the function key then power on, it will enter engineering mode

Network Joining

If the device has never joined the

network

Turn on the device, and it will search for the network to join.

The network indicator stays on: Joins the network successfully

The network indicator stays off : Fail to join the network

If the device has joined the network

and it is not set to default

Turn on the device, and it will search for the previous network to join.

The network indicator stays on: Joins the network successfully

The network indicator stays off : Fail to join the network

Function Key

Press the function key and hold the

pressing for 5 seconds

The device will be set to default and turned off

The status indicator light flashes for 20 times: success

The status indicator light remains off: fail

Press the function key once

The device is in the network: The status indicator light flashes once and sends a report

The device is not in the network: The status indicator light remains off

5. Data Report

Example of ConfigureCmd

FPort：0x07

Bytes

Var(Fix =9 Bytes)

CmdID

DeviceType

NetvoxPayLoadData

CmdID–1 bytes

DeviceType–1 byte –Device Type of Device

NetvoxPayLoadData–var bytes (Max=9bytes)

Off

R831D

0x90

0XB0

Channel(1Bytes)

bit0_relay1,

bit1_relay2,

bit2_relay3,

bit3_bit7:reserved

Reserved

(8ytes,Fixed 0x00)

0x91

Channel(1Bytes)

Reserved

The device will immediately send a version packet report along with an uplink packet including 3 relay status and 3 input status.

The device sends data in the default configuration before any configuration is done.

Default setting:

MaxTime: Max Interval = 900s

MinTime: Min Interval = 2s

Note:

The device report interval will be programmed based on the default firmware which may vary.

The interval between two reports must be the minimum time.

Please refer Netvox LoRaWAN Application Command document and Netvox Lora Command Resolver

http://www.netvox.com.cn:8888/page/index to resolve uplink data.

bit0_relay1,

bit1_relay2,

bit2_relay3,

bit3_bit7:reserved

(8ytes,Fixed 0x00)

Toggle

0x92

Channel(1Bytes)

bit0_relay1,

bit1_relay2,

bit2_relay3,

bit3_bit7:reserved

Reserved

(8ytes,Fixed 0x00)

Red Current Status

0x94

Reserved

(9Bytes,Fixed 0x00)

ConfigReportReq

0x01

MinTime

(2bytes Unit:s)

MaxTime

(2bytes Unit:s)

Reserved

(5Bytes,Fixed 0x00)

ConfigReportRsp

0x81

Status

(0x00_success)

Reserved

(8Bytes,Fixed 0x00)

ReadConfigReportReq

0x02

Reserved

(9Bytes,Fixed 0x00)

ReadConfigReportRsp

0x82

MinTime

(2bytes Unit:s)

MaxTime

(2bytes Unit:s)

Reserved

(5Bytes,Fixed 0x00)

SetSwitchTypeReq

0x03

SwitchType(1byte)

0x00_Toggle,

0x01_Momentary

Reserved

(8Bytes,Fixed 0x00)

SetSwitchTypeRsp

0x83

Status

(0x00_success)

Reserved

(8Bytes,Fixed 0x00)

GetSwitchTypeReq

0x04

Reserved

(9Bytes,Fixed 0x00)

GetSwitchTypeRsp

0x84

SwitchType(1byte)

0x00_Toggle,

0x01_Momentary

Reserved

(8Bytes,Fixed 0x00)

Max Time and Min Time setting

(1)Command Configuration:

MinTime = 1min、MaxTime = 1min

Downlink: 01B0003C003C0000000000

Response: 81B0000000000000000000 (Configuration success)

81B0010000000000000000 (Configuration failure)

(2)Read Configuration:

Downlink：02B0000000000000000000

Response:

82B0003C003C0000000000 (Current configuration)

Relay switch control

(3)Relay1, Relay 2, Relay3 normal open (disconnect)

Downlink：90B0070000000000000000 // bit0=relay1, bit1=relay2, bit2=relay3

(4)Relay1, Relay 2, Relay3 normal close (connect)

Downlink：91B0070000000000000000 // bit0=relay1, bit1=relay2, bit2=relay3

(5)Toggle relay normal open/close

Downlink：92B0070000000000000000 // bit0=relay1, bit1=relay2, bit2=relay3

Relay switch Type

Change relay switch type:

a. Toggle: Normal open/close type switch, ex. toggle switch

b. Momentary: Tact type switch, ex. tact switch

(6)Setting switch type is tact type switch

Downlink：03B0010000000000000000

Response：83B0000000000000000000 (Configuration success)

(7)Confirm switch type

Downlink：04B0000000000000000000

Response：84B0010000000000000000 (The switch type is tact type)

Example for MinTime/MaxTime logic

Example#1 based on MinTime = 1 Hour, MaxTime= 1 Hour

MaxTime MaxTime

(MinTime) (MinTime)

0H 1H 2H

Note:

MaxTime=MinTime. Data will only be report according to MaxTime (MinTime) duration regardless ON/OFF value.

Example#2 based on MinTime = 15 Minutes, MaxTime= 1 Hour

MaxTime

MinTime MinTime MinTime MinTime

0H 15th M 30th M 45th M 1H 2H

Example#3 based on MinTime = 15 Minutes, MaxTime= 1 Hour

MaxTime

MinTime MinTime MinTime MinTime MinTime MinTime

0H 15th M 30th M 45th M 1H 1H15thM1H30thM

Note:

The status has changed, it will be reported at MinTime and recommend the MinTime Interval set as 2 seconds

Collects data

REPORT ON

Collects data

OFF

Does not report

Collects data

REPORTS

OFF

Collects data

REPORTS ON

Collects data

REPORTS ON

Collects data

REPORTS OFF

Collects data

REPORTS OFF

Collects data

REPORTS OFF

Collects data OFF

Does not report

Collects data

Does not report

Collects data

Does not report

Collects data

Does not report

Collects data

REPORT ON

The status changed

Table des matières

Autres manuels netvox Changer

netvox

netvox ZigBee Z815B Manuel utilisateur

netvox

netvox ZigBee Z802 Manuel utilisateur

netvox

netvox RB02C Manuel utilisateur

netvox

netvox RB02B Manuel utilisateur

netvox

netvox ZigBee Z805B Manuel utilisateur

netvox

netvox ZB02C Manuel utilisateur

netvox

netvox EmberLux BLZ-US-01 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

netvox R831D Manuel utilisateur

Manuels Changer populaires d'autres marques