6
5. Data Report
Data report configuration and sending period are as following:
Min Interval
(Unit:second)
Max Interval
(Unit:second) Reportable Change Current Change≥
Reportable Change
Current Change＜
Reportable Change
Any number between
1~65535
Any number between
1~65535 Can not be 0. Report
per Min Interval
Report
per Max Interval
The device will send a version package report immediately after power-on.After it is powered on, and the auto-calibration
is executed for one minute (Do not move the device), the device will report the attribute data.
The device sends data in the default configuration before any configuration is done.
Default Setting:
MaxTime: 0x0E10 (3600s)
MinTime: 0x0E10 (3600s)
BatteryChange: 0x01 (0.1v)
AngleChange: 0x14 (20°)
TemperatureChange: 0x0A (1°C)
ActiveThreshold: 0x0003 // Range:0x0003-0x00FF
Inactivetime: 0x05 (5s) // Range:0x03-0xFF
R718EA Reporting Requirements:
When the vibration of the device exceeds the value of ActiveThreshold (the default value is 3, which can be modified),
it will start to detect, and when the angle of any axis is greater than or equal to AngleChange, the three-axis tilt angle,
battery voltage, and temperature will be reported after the device stops vibrating for 5 seconds.
To detect the next vibration, InActiveTime needs to be longer than 5 seconds (the number of seconds can be modified)
If the vibration continues during the process, the timing will restart.
Calibration:
1. The device must be placed horizontally during automatic calibration.
2. After calibration, the angles of X, Y, Z axes are about 0°, 0°, -90° when the device is placed horizontally.
3. There will be no operation when pressing the button before the automatic calibration is completed.
Note:
(1) The device report interval will be programmed based on the default firmware which may vary.
(2) The interval between two reports must be the minimum time.
Please refer Netvox LoRaWANApplication Command document and Netvox Lora Command Resolver
http://cmddoc.netvoxcloud.com/cmddoc to resolve uplink data.
