NETGEAR Nighthawk R6700 Manuel utilisateur

Installation

Nighthawk

AC1750 Smart WiFi Router

Model R6700

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered

trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other

countries. Information is subject to change without notice. © NETGEAR, Inc. All rights

reserved.

Compliance

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit

http://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

Package Contents

The box contains the following items.

In some regions, a resource CD is included in the package.

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134 USA

May 2014

AC1750 Smart WiFi Router Ethernet cable

Power adapterAntennas (3)

Support

Thank you for purchasing this NETGEAR product.

Aer installing your device, locate the serial number on the label of your

product and use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone

support. NETGEAR recommends registering your product through the

NETGEAR website.

For product updates and web support, visit http://support.netgear.com.

NETGEAR recommends that you use only the ocial NETGEAR support

resources.

You can get the user manual online at

http://downloadcenter.netgear.com or through a link in the product’s

user interface.

2. Attach the antennas.

Attach the antennas on the threaded

antenna posts.

Position the antennas for the best

WiFi performance.

NETGEAR recommends that the

center antenna be vertical and that

you aim the others outward at

45-degree angles as shown.

3. Prepare your modem.

Unplug your modem’s power. If it has a

battery backup, remove the battery.

4. Connect your modem.

Plug in your modem. Put the battery back

in. Then cable the modem to the yellow

Internet port on the router.

5. Power on the router.

The Power LED lights

amber and then turns

white when the router is

ready.

6. Connect a computer.

You can use an Ethernet cable or connect

with WiFi.

To connect with WiFi, use the WiFi

network name and password on the

product label.

7. Log in to the router.

Launch a web browser.

NETGEAR genie displays.

If you do not see genie, enter

www.routerlogin.net in the address

ﬁeld of the web browser. When prompted,

enter admin for the user name and

password for the password.

Follow the genie steps to connect to the

Internet.

8. Get the genie app.

Download the free genie app from

www.NETGEAR.com/genie.

Easily share media, ﬁles, and printers

on the network from your smartphone,

tablet, or laptop.

9. Get the user manual.

You can get the user manual online at

http://downloadcenter.netgear.com

or through a link in the product’s user

interface.

Ethernet cable

Router

Ethernet

cable

Internet

Modem Power

adapter

You can use this diagram to connect your router or follow the detailed instructions in this booklet.

1. Remove the antenna caps.

Remove the antenna caps from the

antenna posts on the router.

DSL or

cable

Antenna posts

Contents

Install Your Router....................................................................................................... 2

LEDs................................................................................................................................ 6

WiFi Network Name and Password......................................................................... 7

Join the WiFi Network................................................................................................ 8

View or Change the Router Settings...................................................................... 9

Prioritize with Quality of Service ..........................................................................12

Share a USB Drive on the Network.......................................................................15

ReadySHARE Vault Backup App.............................................................................16

Share a USB Printer...................................................................................................17

More Premium Features ..........................................................................................18

NETGEAR genie App .................................................................................................20

Install Your Router

Make sure that your Internet service is active before you install

your router.

¾To install your router:

1. Remove the antenna caps.

Remove the antenna caps from the antenna posts on the

router.

2. Attach the antennas.

a. Align the antennas with the antenna posts on the router.

b. Attach the antennas on the threaded antenna posts.

c. Position the antennas for the best WiFi performance.

NETGEAR recommends that the center antenna be vertical

and that you aim the others outward at 45-degree angles,

as shown.

Antenna posts

3. Prepare your modem.

a. Unplug your modem’s power.

b. If the modem has a battery backup, remove its batteries.

c. If your modem was already connected to another router,

disconnect the cable between your modem and that router.

Make sure that your modem is turned o and is cabled only to

the wall jack for your Internet service.

4. Connect your modem.

a. Plug in, then turn on your modem.

b. If you removed the batteries, replace them.

c. With the yellow Ethernet cable that came with the router,

connect your modem to the yellow Internet port on your

router.

Router

Ethernet cable

Modem

Internet

DSL or

cable

Internet

Modem

DSL or

cable

5. Add power to the router.

a. Connect the power adapter to the router and plug the

power adapter into an outlet.

b. Wait for the Power LED on the front panel to light

amber and turn white.

If no LEDs are lit, press the Power On/O button on the

rear panel of the router.

6. Connect a computer.

You can use an Ethernet cable or connect with WiFi:

• For a wired connection, use an Ethernet cable (not included)

to connect your computer to a black Ethernet port on your

router.

• To connect with WiFi, use the WiFi settings on the product

label.

Power

adapter

Internet

DSL or

cable

Modem

Router

DSL or

cable

Modem

Router

Ethernet

cable

Ethernet

cable

Ethernet

cable

Power

adapter

7. Launch a web browser.

The ﬁrst time that you connect to the router, the genie screen

displays. Follow the genie steps to connect to the Internet.

If the genie screen does not display, try the following:

• Close and reopen the browser.

• Make sure that your computer is connected to one of the

four black LAN Ethernet ports on the router or that you are

connected to your WiFi network.

• Make sure that the router has full power and that its Power

LED is lit.

• If your computer is set to a static or ﬁxed IP address (this

is uncommon), change it to obtain an IP address from the

router automatically.

If you still do not see the genie screen, log in to the router so

that genie can detect your Internet connection.

¾To log in to the router:

1. Launch a web browser.

2. Enter www.routerlogin.net in the address ﬁeld of the

browser.

A login screen displays.

3. Enter admin for the user name and password for the

password.

The BASIC Home screen displays. If your Internet connection

is not set up yet, genie automatically detects your Internet

connection.

LEDs

The LEDs on the top of the router light to indicate router activity:

Power

Internet

2.4 GHz WiFi

5 GHz WiFi

Guest WiFi

USB 3.0 port

Ethernet ports 1–4

WiFi On/O button with LED

WPS button with LED

WiFi Network Name and Password

The preset WiFi network name (SSID) and password (network key)

are unique to your router, like a serial number. Because the router

automatically uses WiFi security, you don’t need to set it up. The

WiFi settings are on the product label.

NETGEAR recommends that you use the preset WiFi settings

because you can check the product label if you forget them.

NETGEAR genie lets you change these settings. If you do so, write

down the new WiFi settings and store them in a safe place.

You can write the WiFi settings from your product label in this space

for easy reference.

WiFi network name (SSID):

Network key (password):

If you change the WiFi settings, write the new settings here for

easy reference and store this booklet in a safe place.

WiFi network name (SSID):

Network key (password):

Join the WiFi Network

You can either use Wi-Fi Protected Setup (WPS) or select your WiFi

network and type its password. For help with the WPS button on

your computer or WiFi device, check the instructions or online help

that came with that computer or device. Some older equipment

cannot use WPS.

¾To join the network using WPS:

1. Press the WPS button on the router for three to ﬁve

seconds.

The WPS LED on the router blinks white.

2. Within two minutes, on your computer or WiFi device, press its

WPS button or click its onscreen WPS button.

The WPS LED on the router lights solid white when the

computer or WiFi device connects to your router.

3. Repeat this process to add other computers or WiFi devices.

¾To select your network and enter its password:

1. Open the soware utility that manages your WiFi connections

on the computer or WiFi device that you want to connect to

your router.

This utility scans for WiFi networks in your area.

2. Find and select your router’s WiFi network name (SSID).

The SSID is on the product label.

3. Enter the router’s password (or your custom password if you

changed it) and click the Connect button.

The password is on the product label.

4. Repeat Step 1 through Step 3 to add other computers or WiFi

devices.

Autres manuels pour Nighthawk R6700

Table des matières

Autres manuels NETGEAR Routeur sans fil

NETGEAR

NETGEAR DGN1000 - Wireless-N Router With Built-in DSL... Manuel utilisateur

NETGEAR

NETGEAR WNDR3400v3 Manuel utilisateur

NETGEAR

NETGEAR RangeMax WNR1000 Manuel utilisateur

NETGEAR

NETGEAR DGN2000 - Wireless Router Manuel utilisateur

NETGEAR

NETGEAR MBR1516 Manuel utilisateur

NETGEAR

NETGEAR AirCard 797 Manuel utilisateur

NETGEAR

NETGEAR AirCard 785S Manuel utilisateur

NETGEAR

NETGEAR DGN2200M - Wireless-N 300 Router Manuel utilisateur

NETGEAR

NETGEAR RAX10 Manuel utilisateur

NETGEAR

NETGEAR JNR3000 Manuel utilisateur

NETGEAR

NETGEAR WNR1000v2 - Wireless- N Router Manuel utilisateur

NETGEAR

NETGEAR WNR612v2 - Wireless-N 150 Router Manuel utilisateur

NETGEAR

NETGEAR RangeMax NEXT WNR854T Guide de l'utilisateur

NETGEAR

NETGEAR N300 WNR2000v5 Manuel utilisateur

NETGEAR

NETGEAR JNR3210 Manuel utilisateur

NETGEAR

NETGEAR AC790S Manuel utilisateur

NETGEAR

NETGEAR WNDR3700v3 Guide de l'utilisateur

NETGEAR

NETGEAR DG834PN - RangeMax ADSL Modem Wireless... Manuel utilisateur

NETGEAR

NETGEAR RangeMax Next WNR834M Manuel utilisateur

NETGEAR

NETGEAR WNCE3001 Manuel utilisateur

NETGEAR

NETGEAR WPNT834 Manuel utilisateur

NETGEAR

NETGEAR DGN2200M - Wireless-N 300 Router Manuel utilisateur

NETGEAR

NETGEAR CENTRIA WNDR4700 Manuel utilisateur

NETGEAR

NETGEAR R9000 Manuel utilisateur

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

D-Link

D-Link DIR-506L Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur

Draytek

Draytek Vigor2120 Series Manuel utilisateur

Sitecom

Sitecom WLR-4000 Manuel utilisateur