NETGEAR D6200B Manuel utilisateur

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

January 2013

Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label

of your product and use it to register your product at

https://my.netgear.com.

You must register your product before you can use NETGEAR

telephone support. NETGEAR recommends registering your

product through the NETGEAR web site.

Phone (US only): 1-888-NETGEAR

Phone (Other Countries):

See http://support.netgear.com/general/contact/default.aspx.

NETGEAR recommends that you use only the official NETGEAR

support resources.

D6200B WiFi Modem Router

Installation Guide

Package Contents

The box should contain the following items. If any items are

incorrect, missing, or damaged, contact your NETGEAR dealer.

Ethernet cable

Power adapter

D6200B Modem

DSL cable

Router

GM plug to US jack adapter

The filter or splitter

provided depends

on the region.

1. ADSL Internet 2. Computer

3. Power

4. Open browser

You can use this diagram to connect your modem router to ADSL or cable/fiber modem, or you can follow the

or cable/fiber

modem*

instructions in this booklet.

After power on, wait for

the WiFi LED to turn blue.

If the web page does not display,

close and reopen the browser to

http://routerlogin.net in the address

bar. Enter the user name admin

and the password password.

*Note: Connect to the telephone line for ADSL Internet or to the cable/fiber modem from the Gigabit Ethernet WAN port.

User Manual

You can get the user manual online at

http://downloadcenter.netgear.com or through a link in the product’s user

interface.

Compliance

For the complete EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

NETGEAR, the NETGEAR logo, and Connect with Innovation are

trademarks and/or registered trademarks of NETGEAR, Inc. and/or its

subsidiaries in the United States and/or other countries. Information is

Intended for indoor use only in all EU member states, EFTA states, and

Switzerland.

Contents

Before You Begin (DSL Connection). . . . . . . . . . . . . . . . . . . . . 2

Install Your Modem Router . . . . . . . . .. . . . . . . . . . . . . . . . . . . . 3

1. Connect the router to your Internet service. . . . . . . . . . . 3

2. Power on your router.. . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. Connect a computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4. Open a web browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Preset Wireless Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Wireless Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . 7

Join the Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

WPS Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Manual Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Access the Router to Make Changes . . . . . . . . . . . . . . . . . . . . . 9

NETGEAR genie App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

NETGEAR genie Mobile App . . . . . . . . . . . . . . . . . . . . . . 11

ReadySHARE Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

ReadySHARE Printer . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . 13

Control Center Configuration . . . . . . . . . . . . . . . . . . . . . . 15

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Before You Begin (DSL Connection)

If you are connecting to a DSL line, make sure that your DSL service

is active before you install the modem router. You need the

information listed here to install your DSL modem and connect to the

Internet. Locate it and have it on hand before you start the installation

procedure.

•DSL user name and password. These are included in the

welcome letter your DSL Internet service provider (ISP) sent you

when you signed up for your service. Record your DSL Internet

service account user name and password here:

User name:

Password:

•Your telephone number or DSL account number. If you do not

have voice service, you can use your DSL account number in

place of a phone number.

If you do not know or cannot locate your user name and

password, call your DSL Internet service provider.

Be specific when speaking with your DSL Internet service

provider. For example, you could say:

I need my DSL service user name and password. Can you help

me?

Note: If your provider says that they do not support NETGEAR

devices, tell them you need only your DSL user name and

password; you do not need support.

Install Your Modem Router

Note: Keep your modem router in a vertical position.

1. Connect the router to your Internet service.

You can connect either directly to a DSL line or to a fiber/cable

modem.

To connect to a DSL line:

a. Install an ADSL microfilter between the phone line and the

phone.

b. Connect the ADSL port of the modem router to the ADSL

port of the microfilter

c. Use an ADSL microfilter for every phone line in the house if

your modem router and telephone connect to the same

phone line.

Plugs into the ADSL line

To connect to a cable/fiber modem:

Connect one end of the yellow Ethernet cable to the WAN port on

the router, and connect the other end to your cable/fiber modem.

2. Power on your router.

a. Connect the power adapter to the router, and plug the power

adapter into an outlet.

b. Wait until the WiFi LED turns solid blue.

3. Connect a computer.

You can use an Ethernet cable or connect wirelessly.

• Use an Ethernet cable (not provided) to connect your

computer to an Ethernet port on your router.

• Connect wirelessly by using the preset wireless security

settings on the label on the bottom of the router.

4. Open a web browser.

The NETGEAR genie installation wizard displays.

D6200

If you do not see the genie screen, close and reopen the browser,

and enter http://routerlogin.net in the address bar. See

Troubleshooting on page 16.

5. Click Next to allow the genie to help you. Follow the steps to set up

your Internet connection.

Note for DSL: If your DSL Internet service requires a user name

or password, you are prompted to enter this information. If you do

not have this information, contact your Internet service provider

(see Before You Begin (DSL Connection) on page 2).

Preset Wireless Security

This product has a unique WiFi network name (SSID) and network

key (password). The default SSID and password are uniquely

generated for every device, like a serial number, to protect and

maximize your wireless security. This information is on the label on

the bottom of the product.

The WiFi network name (SSID) and password are here.

NETGEAR recommends that you do not change the preset SSID and

password. If you do change the settings, the security SSID or

password on the bottom of the product no longer apply.

Note: Your network name (SSID) and password are case-sensitive.

Your network name, security method, and password need to be the

same for all the wireless devices that are connected to your router on

a network.

Wireless Network Settings

Record the default preset wireless settings that are printed on the

label in the spaces here for easy reference.

2.4 GHz WiFi network name (SSID):

2.4 GHz network key (password):

5 GHz WiFi network name (SSID):

5 GHz network key (password):

If you change the default settings, record them here for easy

reference, and then store this booklet in a safe place:

2.4 GHz WiFi network name (SSID):

2.4 GHz network key (password):

5 GHz WiFi network name (SSID):

5 GHz network key (Password):

To retrieve or update your wireless password, type

http://www.routerlogin.net in a web browser and log in using the

default user name (admin) and password (password).

Select Basic > Wireless Settings to locate your wireless passwords.

Join the Wireless Network

You can use either the Wi-Fi Protected Setup (WPS) method or the

manual method to join your wireless network.

WPS Method

WPS lets you join your WiFi network without typing the password.

If your wireless device supports WPS, the first time you join the

network, you might be prompted to press the WPS button on the

modem router.

1. Press the WPSbutton on the modem router.

2. Within 2 minutes, press the WPSbutton on the computer or

wireless device that is trying to join the network. Follow the WPS

instructions that came with your computer or wireless device to join

the network.

Note: Some older wireless computers or devices cannot use WPS.

Manual Method

1. On your computer or wireless device, open the software that

manages its wireless connections. This software scans for

wireless networks in your area.

2. Look for the WiFi network name (SSID) on the list and select it. The

SSID is on the label on the bottom of the modem router.

Note: If you changed the name of your network during the setup

process, look for that network name.

3. Enter the preset password (or your custom password if you

changed it), and click Connect.

Table des matières

Autres manuels NETGEAR Routeur sans fil

NETGEAR

NETGEAR WGT634U Manuel utilisateur

NETGEAR

NETGEAR RAX10 Manuel utilisateur

NETGEAR

NETGEAR JWNR2000v1 Manuel utilisateur

NETGEAR

NETGEAR NIGHTHAWK R7000 Manuel utilisateur

NETGEAR

NETGEAR DG834PN - RangeMax ADSL Modem Wireless... Manuel utilisateur

NETGEAR

NETGEAR R6330 Manuel utilisateur

NETGEAR

NETGEAR Zing Manuel utilisateur

NETGEAR

NETGEAR AirCard 770S Manuel utilisateur

NETGEAR

NETGEAR WPN824v3 - RangeMax Wireless Router Manuel utilisateur

NETGEAR

NETGEAR WNR1000v3 - Wireless- N Router Manuel utilisateur

NETGEAR

NETGEAR WNR612v2 - Wireless-N 150 Router Manuel utilisateur

NETGEAR

NETGEAR Nighthawk M5 Manuel utilisateur

NETGEAR

NETGEAR DGN2000 - Wireless Router Manuel utilisateur

NETGEAR

NETGEAR WNR1000v3 - Wireless- N Router Manuel utilisateur

NETGEAR

NETGEAR DGN2200v4 Manuel utilisateur

NETGEAR

NETGEAR AirCard 790 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk AX6 AX5200 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk X10 Manuel utilisateur

NETGEAR

NETGEAR WPNT834 Manuel

NETGEAR

NETGEAR Nighthawk C6900 Manuel utilisateur

NETGEAR

NETGEAR LB1120 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk D7000 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk Pro Gaming XR1000 Manuel utilisateur

NETGEAR

NETGEAR WPNT834 Manuel utilisateur

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

D-Link

D-Link DIR-506L Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur

Draytek

Draytek Vigor2120 Series Manuel utilisateur

Sitecom

Sitecom WLR-4000 Manuel utilisateur