NETGEAR GSM4248PX Manuel

Hardware Installation Guide

AV Line of Fully Managed Switches

M4250 Series

NETGEAR, Inc.

350 E. Plumeria DriveMarch 2021

San Jose, CA 95134, USA202-12213-01

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Netgear GSM4248PX

o cerca il tuo prodotto tra le migliori offerte di Switch

Support and Community

Visit netgear.com/support to get your questions answered and access the latest

downloads.

You can also check out our NETGEAR Community for helpful advice at

community.netgear.com.

Regulatory and Legal

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français

canadien à https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document in Canadian French at

https://www.netgear.com/support/download/.)

For regulatory compliance information including the EU Declaration of Conformity, visit

https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at

https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the

device to your place of purchase within your return period.

Do not use this device outdoors. The PoE source is intended for intra building connection

only.

Trademarks

Any non-NETGEAR trademarks are used for reference purposes only.

Revision History

CommentsPublish DatePublication Part

Number

We added three 24-port PoE+ and PoE++ models:

M4250-26G4F-PoE+ (SKU GSM4230P)

M4250-26G4XF-PoE+ (SKU GSM4230PX)

M4250-26G4F-PoE++ (SKU GSM4230UP)

We added three 40-port PoE+ and PoE++ models:

M4250-40G8F-PoE+ (SKU GSM4248P)

M4250-40G8XF-PoE+ (SKU GSM4248PX)

M4250-40G8XF-PoE++ (SKU GSM4248UX)

We changed the fan information for the existing models (see Fans for

the 8-port PoE+ and PoE++ models on page 39 and Fans for the LED

tiles model and the aggregation model on page 45).

March 2021202-12213-01

First publication.September 2020202-12092-01

AV Line of Fully Managed Switches M4250 Series

Contents

Chapter 1 Introduction

Overview................................................................................................6

Features.................................................................................................7

Safety instructions and warnings........................................................9

Chapter 2 Hardware Overview

Hardware descriptions of the 8-port PoE+ and PoE++ models....13

Front panel of the 8-port PoE+ and PoE++ models..................13

Back panel of the 8-port PoE+ and PoE++ models...................14

LEDs of the 8-port PoE+ and PoE++ models.............................16

Hardware descriptions of the 24-port PoE+ and PoE++ models..18

Front panel of the 24-port PoE+ and PoE++ models...............18

Back panel of the 24-port PoE+ and PoE++ models................19

LEDs of the 24-port PoE+ and PoE++ models...........................21

Hardware descriptions of the 40-port PoE+ and PoE++ models..23

Front panel of the 40-port PoE+ and PoE++ models...............23

Back panel of the 40-port PoE+ and PoE++ models................24

LEDs of the 40-port PoE+ and PoE++ models...........................26

Hardware descriptions of the LED tiles model with 2.5 Gbps

ports.....................................................................................................28

Front panel of the LED tiles model..............................................28

Back panel of the LED tiles model...............................................28

LEDs of the LED tiles model.........................................................29

Hardware descriptions of the aggregation model with multiple 10G

SFP+ fiber ports..................................................................................30

Front panel of the aggregation model.......................................30

Back panel of the aggregation model........................................31

LEDs of the aggregation model...................................................32

Switch hardware interfaces...............................................................33

1GBASE-T RJ-45 and 2.5GBASE-T RJ-45 copper ports............33

PoE port capacities and budgets.................................................33

Transceiver modules and cables for SFP and SFP+ fiber ports.35

Cables and speed..........................................................................36

Dual-function Reset button...........................................................36

USB 2.0 port....................................................................................37

Out-of-band 1G Ethernet port.....................................................37

RJ-45 RS-232 console port............................................................37

USB Type-C console port..............................................................38

Fans......................................................................................................38

Fans for the 8-port PoE+ and PoE++ models............................39

Fans for the 24-port PoE+ and PoE++ models..........................41

Fans for the 40-port PoE+ and PoE++ models..........................43

Fans for the LED tiles model and the aggregation model.......45

Chapter 3 Installation

Step 1: Prepare the site......................................................................48

Step 2: Protect against electrostatic discharge..............................49

Step 3: Unpack the switch.................................................................49

Step 4: Mount or place the switch....................................................51

Mount the switch in a rack............................................................51

Place the switch on a flat surface.................................................53

Optional Step 5: Install SFP or SFP+ transceiver modules............53

Step 6: Connect devices to the switch.............................................54

Step 7: Check the installation...........................................................55

Step 8: Apply AC power and check the LEDs.................................55

Optional Step 9: Connect a console to the switch.........................56

Chapter 4 Troubleshooting

Troubleshooting chart.......................................................................59

PoE troubleshooting suggestions....................................................60

Additional troubleshooting suggestions.........................................61

AV Line of Fully Managed Switches M4250 Series

Introduction

The NETGEAR AV Line of Fully Managed Switches M4250 Series consists of

high-performance, IEEE-compliant, professional audio-video switches for audio over IP

and small as well large-scale video over IP, including LED tile-based video walls.

Depending on the model, the switch supports 1 Gbps, 2.5 Gbps, and 10 Gbps

multispeed ports for Ethernet connections, including PoE+ and PoE++ connections,

and SFP+ ports for 1 Gbps and 10 Gbps fiber connections.

In this guide, the AV Line of Fully Managed Switches M4250 Series is referred to as the

switch.

This hardware installation guide complements the installation guide that came with the

switch.

This chapter serves as an introduction to the switch and includes the following sections:

• Overview

• Features

• Safety instructions and warnings

Note: For more information about the topics that are covered in this manual, visit the

support website at netgear.com/support.

Note: For switch documentation, including the user manual, the command-line interface

manual, and the data sheet, visit netgear.com/support/download.

Overview

This installation guide is for the following NETGEAR AV Line of Fully Managed Switches

M4250 Series models:

•8-port PoE+ and PoE++ models:

-M4250-10G2F-PoE+: Eight PoE+ (802.3at) 1GBASE-T RJ-45 ports, two 1GBASE-T

RJ-45 ports, and two 1G SFP fiber uplink ports. The total PoE budget for the

switch is 125W.

-M4250-10G2XF-PoE+: Eight PoE+ (802.3at) 1GBASE-T RJ-45 ports, two

1GBASE-T RJ-45 ports, and two 10G SFP+ fiber uplink ports. The total PoE budget

for the switch is 240W.

-M4250-10G2XF-PoE++: Eight PoE++ (802.3bt) 1GBASE-T RJ-45 ports, two

1GBASE-T RJ-45 ports, and two 10G SFP+ fiber uplink ports. The total PoE budget

for the switch is 720W.

•24-port PoE+ and PoE++ models:

-M4250-26G4F-PoE+: 24 PoE+ (802.3at) 1GBASE-T RJ-45 ports, two 1GBASE-T

RJ-45 ports, and four 1G SFP fiber uplink ports. The total PoE budget for the

switch is 300W.

-M4250-26G4XF-PoE+: 24 PoE+ (802.3at) 1GBASE-T RJ-45 ports, two 1GBASE-T

RJ-45 ports, and four 10G SFP+ fiber uplink ports. The total PoE budget for the

switch is 480W.

-M4250-26G4F-PoE++: 24 PoE++ (802.3bt) 1GBASE-T RJ-45 ports, two 1GBASE-T

RJ-45 ports, and four 10G SFP+ fiber uplink ports. The total PoE budget for the

switch is 1440W with both internal power supply units connected.

•40-port PoE+ and PoE++ models:

-M4250-40G8F-PoE+: 40 PoE+ (802.3at) 1GBASE-T RJ-45 ports and eight 1G

SFP fiber uplink ports. The total PoE budget for the switch is 480W.

-M4250-40G8XF-PoE+: 40 PoE+ (802.3at) 1GBASE-T RJ-45 ports and eight 10G

SFP+ fiber uplink ports. The total PoE budget for the switch is 960W.

-M4250-40G8XF-PoE++: 40 PoE++ (802.3bt) 1GBASE-T RJ-45 ports and eight

10G SFP+ fiber uplink ports. The total PoE budget for the switch is 2880W with

all three internal power supply units connected.

Hardware Installation Guide6Introduction

AV Line of Fully Managed Switches M4250 Series

•Special models:

-M4250-12M2XF: LED tiles model with 2.5 Gbps ports. Twelve 2.5GBASE-T RJ-45

ports and two 10G SFP+ fiber uplink ports.

-M4250-16XF: Aggregation model with multiple 10G SFP+ fiber ports. Sixteen

1G/10G SFP+ fiber ports.

The switch lets you create high-speed connections to a server or network backbone.

For example, you can do the following:

•Connect switches to each other with high-speed links

•Link to high-speed servers

•Provide 10M/100M/1G/2.5G copper and 1G/10G fiber connectivity

You would typically rack-mount the switch in a wiring closet or equipment room as a

standalone switch. The switch is IEEE compliant and offers low latency for high-speed

networking. All ports can automatically negotiate to the highest speed, which makes

the switch also suitable for AV environments with a mix of 1 Gbps and 2.5 Gbps Ethernet

devices and 1G and 10G fiber connections. With the exception of the ports on model

M4250-12M2X, the copper ports that support 10 Mbps and 100 Mbps ports can operate

in half-duplex or full-duplex mode. For 1 Gbps and 2.5 Gbps connections, the copper

ports always operate in full-duplex mode.

Features

The switch supports the following key hardware features:

•PoE+ and PoE++ models with switch ports in various configurations depending on

the model:

- 8, 24, or 40 PoE+ or PoE++ ports, depending on the model

-Up to four 1GBASE-T RJ-45 ports (also supporting 10M and 100M speeds),

depending on the model

-Up to eight 1G SFP or 10G SFP+ fiber uplink ports, depending of the model

-PoE budget from 125W to 2880W, depending on the model

•LED tiles model with twelve 2.5GBASE-T RJ-45 ports (also supporting 1G and 100M

speeds) and two 10G SFP+ fiber ports

•Aggregation model with sixteen 1G/10G SFP+ fiber ports

•Support for switching fabric up to 320 Gbps, depending on the model, with all ports

at line-rate.

Hardware Installation Guide7Introduction

AV Line of Fully Managed Switches M4250 Series

•One out-of-band (OOB) 1G Ethernet RJ-45 port.

•One RS-232 RJ-45 console port.

•One USB Type-C console port.

•One USB 2.0 port for connection to a storage device.

•Full-width, 1U or 2U chassis

•Full compatibility with IEEE standards:

- IEEE 802.3 (Ethernet )

- IEEE 802.3i (10BASE-T)

- IEEE 802.3u (100BASE-TX)

- IEEE 802.3ab (1000BASE-T)

- IEEE 802.3bz (2.5GBASE-T)

- IEEE 802.3z (1000BASE-SX/LX)

- IEEE 802.3ae (10GBASE-SR, 10GBASE-LR)

-IEEE 802.3x Full-duplex flow control

- IEEE 802.3ad Link aggregation (LAG with LACP)

-IEEE 802.3az Energy Efficient Ethernet (EEE)

-IEEE 802.3af (PoE)

- IEEE 802.3at (PoE+)

- IEEE 802.3bt (PoE++)

-IEEE 802.1AS-2011 Timing and Synchronization for Time-Sensitive Applications

(generalized Precision Time Protocol [gPTP])

-IEEE 802.1Qav-2009 Forwarding and Queuing Enhancements for Time-Sensitive

Streams (FQTSS)

- IEEE 802.1Qat-2010 Stream Reservation Protocol (SRP)

- IEEE 802.1BA-2011 Audio Video Bridging (AVB) Systems

•AutoSensing and autonegotiating capabilities for all ports.

•Auto Uplink™ technology is supported on all ports.

•Automatic address learning function to build the packet-forwarding information

table. The table contains up to 16K Media Access Control (MAC) addresses.

•Store-and-forward transmission to remove bad packets from the network.

•Active flow control to minimize packet loss and frame drops.

Hardware Installation Guide8Introduction

AV Line of Fully Managed Switches M4250 Series

•Half-duplex backpressure control.

•Per-port status LEDs and system status LEDs.

•NETGEAR green power-saving features, including energy efficiency mode that fully

conforms to the IEEE802.3az standard.

Safety instructions and warnings

Use the following safety guidelines to ensure your own personal safety and to help

protect your system from potential damage.

To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,

observe the following precautions:

•This product is designed for indoor use only in a temperature-controlled and

humidity-controlled environment. For more information, see the environmental

specifications in the appendix or the data sheet.

Note the following:

-If you want to connect the switch to a device located outdoors, the outdoor device

must be properly grounded and surge protected, and you must install an Ethernet

surge protector inline between the switch and the outdoor device. Failure to do

so can damage the switch.

-Before connecting this switch to outdoor cables or devices, see

https://kb.netgear.com/000057103 for safety and warranty information.

-Failure to follow these guidelines can result in damage to your NETGEAR product,

which might not be covered by NETGEAR’s warranty, to the extent permissible

by applicable law.

•Observe and follow service markings:

- Do not service any product except as explained in your product documentation.

Some devices should never be opened.

-If applicable to your product, opening or removing covers that are marked with

the triangular symbol with a lightning bolt can expose you to electrical shock.

We recommend that only a trained technician services components inside these

compartments.

Hardware Installation Guide9Introduction

AV Line of Fully Managed Switches M4250 Series

•If any of the following conditions occur, unplug the product from the power outlet

and replace the part or contact your trained service provider:

- Depending on your product, the power adapter, power adapter cable, power

cable, extension cable, or plug is damaged.

-An object fell into the product.

- The product was exposed to water.

- The product was dropped or damaged.

-The product does not operate correctly when you follow the operating

instructions.

•Keep your product away from radiators and heat sources. Also, do not block cooling

vents.

•Do not spill food or liquids on your product components, and never operate the

product in a wet environment. If the product gets wet, see the appropriate section

in your troubleshooting guide, or contact your trained service provider.

•Do not push any objects into the openings of your products. Doing so can cause

fire or electric shock by shorting out interior components.

•Use the product only with approved equipment.

•If applicable to your product, allow the product to cool before removing covers or

touching internal components.

•Operate the product only from the type of external power source indicated on the

electrical ratings label. If you are not sure of the type of power source required,

consult your service provider or local power company.

•To avoid damaging your product, if your product uses a power supply with a voltage

selector, be sure that the selector is set to match the power at your location:

-115V, 60 Hz in most of North and South America and some Far Eastern countries

such as South Korea and Taiwan

- 100V, 50 Hz in eastern Japan and 100V, 60 Hz in western Japan

-230V, 50 Hz in most of Europe, the Middle East, and the Far East

•Be sure that attached devices are electrically rated to operate with the power available

in your location.

•Depending on your product, use only a supplied power adapter or approved power

cable:

If your product uses a power adapter:

-If you were not provided with a power adapter, contact your local NETGEAR

reseller.

Hardware Installation Guide10Introduction

AV Line of Fully Managed Switches M4250 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NETGEAR Changer

NETGEAR

NETGEAR FS116P - ProSafe 16 Port 10/100 Desktop... Manuel utilisateur

NETGEAR

NETGEAR ProSAFE FS726Tv2 Manuel utilisateur

NETGEAR

NETGEAR GS108T-200NAS Mode d’emploi

NETGEAR

NETGEAR Universal Pro XS508M Manuel utilisateur

NETGEAR

NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch Manuel utilisateur

NETGEAR

NETGEAR GS308P Manuel utilisateur

NETGEAR

NETGEAR GS305Pv3 Manuel utilisateur

NETGEAR

NETGEAR 10/100/1000 Manuel utilisateur

NETGEAR

NETGEAR GS418TPP Manuel utilisateur

NETGEAR

NETGEAR FS728TP - ProSafe 24 Port 10/100 Smart... Manuel

NETGEAR

NETGEAR GS748Tv4 Mode d’emploi

NETGEAR

NETGEAR ProSafe XS712T Manuel

NETGEAR

NETGEAR EN516 - Hub - EN Manuel utilisateur

NETGEAR

NETGEAR GS700TS 724TS Manuel

NETGEAR

NETGEAR FS728TP - ProSafe 24 Port 10/100 Smart... Manuel utilisateur

NETGEAR

NETGEAR GS605 - Gigabit Desktop Switch Manuel utilisateur

NETGEAR

NETGEAR GS700AT Series Mode d’emploi

NETGEAR

NETGEAR GS305P Manuel utilisateur

NETGEAR

NETGEAR WFS709TP - ProSafe Smart Wireless Controller Mode d’emploi

NETGEAR

NETGEAR M4250-10G2XF-PoE++ Manuel

NETGEAR

NETGEAR ProSafe JGS524v2 Manuel de la liste des pièces

NETGEAR

NETGEAR ProSafe GSM7324 Manuel utilisateur

NETGEAR

NETGEAR FS108 - ProSafe 10/100 Desktop Switch Manuel utilisateur

NETGEAR

NETGEAR XS708T Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur