NETGEAR Home Router Manuel utilisateur

jË-ÖÍjÁ

.jÍÖ¬ËÖaj

Getting Started

The NETGEAR Smart Wizard Setup CD provides a

graphical step-by-step wizard that will assist you with

setting up your router.

Estimated completion time: about 20 minutes.

What do I do?

Simply put the Smart Wizard CD into your computer,

and follow the on screen instructions.

What’s on the CD?

The Smart Wizard Setup CD contains:

• A setup wizard

• A Setup Manual for your reference

•Tutorials

• Links to useful Web sites

• Bonus items

After the router is set up, how can

I change its configuration?

Simply open a browser and log in to the router at

http://www.routerlogin.net. The user name is admin

and the password is password, in lower case letters.

Remove the NETGEAR Smart Wizard Setup CD. Remove the router.

If you plan to stand the router up, attach its feet.

Become acquainted with the router status lights.

A. First, be sure your Internet connection is

active. Do not plug the router in yet.

B. Insert the NETGEAR Smart Wizard

Setup CD into your computer.

If the wizard screen does not appear, double

click autorun.exe on the CD. Apple Macintosh

users, double click setup.htm on the CD.

C. Next, click Setup.

Simply follow the on-screen instructions to set

up the router. When the setup is finished, go on

line to test your Internet connection.

3RZHU ,QWHUQHW /$1

7HVW

August 2004

NETGEAR is a registered trademark of NETGEAR, Inc. in the

United States and/or other countries.

Other brand and product names are trademarks or registered

trademarks of their respective holders. Information is subject to

change without notice.

I am an advanced user, can I

bypass the setup wizard?

To bypass the wizards, connect the router, log in from

a DHCP enabled (IP & DNS) computer at

http://www.routerlogin.net/basicsetting.htm with

the user name of admin and the password of

password, both in lower case letters.

Troubleshooting Tips

Here are some tips for correcting simple problems

you may have.

Once the router is connected, always

restart your network in this sequence:

1. Unplug and turn off the modem, turn off the

router, and shut down the computer.

2. Turn on the modem and wait two minutes.

3. Turn on the router and wait 1 minute.

4. Turn on the computer.

Make sure the cables are plugged in.

• The router Internet status light will be lit if the

Ethernet cable from the router to the modem is

plugged in securely and the modem and router

are turned on.

• For each powered on computer connected to the

router with an Ethernet cable, the corresponding

LAN status light will be lit. The label on the

bottom of the router identifies the number of each

LAN port.

Make sure the network settings of the

computer are correct.

Computers connected to the router must be configured

to obtain IP and DNS addresses automatically via

DHCP. For help with this, please see the tutorials on

the CD.

Check the router status lights to verify

correct router operation.

The Power light should turn solid green. If after 2

minutes it is not, reset the router as described in the

Setup Manual on the CD.

I don’t have a working CD drive.

Go to http://www.NETGEAR.com and download the

manual for your product from the support area of the

Web site. Follow the setup instructions in the manual.

Technical Support

Thank you for selecting NETGEAR products.

After completing the Smart Wizard configuration

assistant, locate the serial number on the bottom label

of your product and use it to register your product at

http://www.NETGEAR.com/register.

Registration on the web site or over the phone is

required before you can use our telephone support

service. The phone numbers for worldwide regional

customer support centers are on the Warranty and

Support Information card that came with your

product.

Go to http://kbserver.netgear.com for product

updates and web support.

Table des matières

Autres manuels NETGEAR Routeur réseau

NETGEAR

NETGEAR DG834G Manuel

NETGEAR

NETGEAR RP614 v4 Manuel de référence

NETGEAR

NETGEAR VPN Manuel

NETGEAR

NETGEAR FS308 - Switch Manuel utilisateur

NETGEAR

NETGEAR Nighthawk X4 Guide de dépannage

NETGEAR

NETGEAR RAX30 Manuel utilisateur

NETGEAR

NETGEAR XE104 - 85 Mbps Wall-Plugged EN Switch... Manuel utilisateur

NETGEAR

NETGEAR N150 Manuel utilisateur

NETGEAR

NETGEAR GS750E Manuel utilisateur

NETGEAR

NETGEAR C6250 Manuel utilisateur

NETGEAR

NETGEAR Orbi RBW30 Manuel utilisateur

NETGEAR

NETGEAR D6400 Manuel utilisateur

NETGEAR

NETGEAR N150 Manuel utilisateur

NETGEAR

NETGEAR RangeMax WNR834B Manuel utilisateur

NETGEAR

NETGEAR MR1100EE Manuel utilisateur

NETGEAR

NETGEAR N750 Manuel utilisateur

NETGEAR

NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall... Manuel utilisateur

NETGEAR

NETGEAR Orbi RBR50 Manuel utilisateur

NETGEAR

NETGEAR C6220 Manuel utilisateur

NETGEAR

NETGEAR Orbi Pro SXS80 Manuel utilisateur

NETGEAR

NETGEAR LBR20 Fiche technique

NETGEAR

NETGEAR WNHDE111 Manuel utilisateur

NETGEAR

NETGEAR RP614 v2 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk R7450 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

LevelOne

LevelOne FBR-1416 Manuel utilisateur