NETGEAR PLW1000 Manuel utilisateur
Adding a new PLW1000 to a secured powerline network
PLW1000 helps you expand your wireless network as it creates a new WiFi network for your
home. You just need to plug in your PLW1000 to any power outlet in your home and wait for it
to connect to your existing powerline network. If your powerline network is already secured,
your new PLW1000 will not be able to detect your existing powerline network. This article
guides you on how to add your new PLW1000 to your secured powerline nework.
To add a new PLW1000 to a secured powerline network:
1. Plug in your PLW1000 to your power outlet. Wait for the LEDs to turn on. If the device is not
turning on, check the On/Off switch on the side.
2. Press the Security button on one of the powerline adapters that is already connected to the
powerline network.
3. Within two minutes, press the Security button on your PLW1000.
4. Once the Pick-A-Plug LED on your PLW1000 is lit, it means that it’s already connected to your
existing powerline network.
You have successfully added a new PLW1000 to a secured powerline network
How to enable wireless card access list on PLW1000 V2?
Wireless card access list restricts access to the wireless network to only allow specific MAC
address. It means you have to enter your WiFi clients MAC address before it could connect to
your PLW1000’s wireless network. This article provides steps on how to enable wireless card
access list on your PLW1000.
To enable wireless card access list on PLW1000:
1. Use a computer or a WiFi device that is connected to your PLW1000.
2. Open your preferred browser (i.e. Safari, Internet Explorer, Mozilla Firefox, Google Chrome etc).
3. Type http://www.mywifiext.net in the web browser address bar.
4. When prompted to log in, enter admin for username and password for password.
NETGEAR Genie displays.
5. Click ADVANCED then Wireless Settings.
6. Click Setup Access List.
7. Click Add
8. Enter the Device Name and MAC Address of your WiFi client. Click Apply to save the settings.
Note: You can also select the device under Available Wireless Cards.
9. Select Turn Access Control On and click Apply. To add another WiFi client, click Add and follow
step number 8.
You have successfully enabled wireless card access list feature on your PLW1000.
Adding a powerline adapter to an existing powerline network
Overview:
When you purchase a Powerline bundle, the 2 Powerline adapters come pre-configured with
matching security encryption keys, so they will automatically sync up when plugged into your
home network. But once you have an existing Powerline network, how do you add more
Powerline adapters to the network? You can use the steps below to add additional Powerline
adapters to your network.
Process:
1. Make sure your current Powerline adapters are plugged in and working in your current
Powerline Network.
(Figure 1)
(*example only, your Powerline may be different)
2. On any of the Powerline adapters in your current Powerline network, press the Powerline AV
Ethernet Adapter Security button for 2 seconds. (See example in figure #1 above.)
The Power LED starts blinking after you release the button.
The adapter automatically creates a new, randomly generated network encryption key that each
Powerline adapter on the network will use.
Note: Do not press the security button on both Powerline adapters while adding a new
Powerline device. Make sure that the Powerline adapter is not on power saving mode, the
security button is not working on this mode.
At this point, the other adapters in your network cannot communicate with each other.
3. Within 2 minutes of pressing the Security button on the existing Powerline adapter, you want to
press the Security button on the second adapter (the one you want to add) for 2 seconds.
In order to pair the devices, you need to press both buttons within 2 minutes.
This securely configures your Powerline network with the same network encryption key.
4. If you want to add additional Powerline adapters, press the Security button on the next adapter
for 2 seconds, and then press the Security button on any additional adapters in your network for
2 seconds. The adapters retain security settings even if they are unplugged.
Note: Make sure that you connect the new Powerline adapters directly to power outlets
and not on power surge protectors or power strips.
There are really 4 different types of PLC products that have been or are sold by NETGEAR
today :
Homeplug 1.0 (including the XE102G, XE102, WGXB102, WGX102);
HomePlug 1.0 Turbo (including the XE103G, XE103, XEB1004, XE104, XETB1001, XET1001,
XEPS103, XEPSB103, XEPSB1001);
HomePlug AV (including XAVB101, XAV101, XAVB1004, XAV1004, XAV1101, XAV2101, XAV2501,
XAV1601).
HomePlug AV 500 Mbps (including XAV5001, XAV5501, XAV5004)
HomePlug AV 1200 Mbps (including PL1200, PLP1200)
In terms of compatibility, please consider the following --
HomePlug 1.0 (14Mbps) coexists and is interoperable with HomePlug 1.0 Turbo (85Mbps), but
at the lower speed. So, if you have an existing HomePlug 1.0 network and attach a HomePlug
1.0 Turbo device, it will connect at 14Mbps.
HomePlug 1.0 (14Mbps) and HomePlug 1.0 Turbo (85Mbps) can coexist with HomePlug AV
(200Mbps & 500 mbps) devices, but are not interoperable. So these devices can exist in the same
home and operate independently, but cannot communicate together.
HomePlug AV 200 Mbps and 500 Mbps coexist and are interoperable with each other, but at the
lower 200 mbps speed.
Troubleshooting
If you are having problems with synchronizing one or more Powerline adapters, you have the
option of resetting them to Factory default by pressing the Factory Reset button for 1 second,
then release. Resetting the Powerline Adapter to Factory default will reset the security
encryption key back to its default, then you can try steps 1-3 (above) again. You can also
reset the adapter by logging into the genie interface of the powerline adapter.
** Please refer to your Powerline User Manual for additional information on adding additional
Powerline devices to the Powerline network. You can also visit this link for information: Product
FAQ: Powerline adapters
Powerline Sleep Mode
The following picture shows a typical setup for a Powerline bundle.
Powerline A is connected to a Modem/WiFi Router
Powerline B is connected to a Smart TV
Through the home power grid the Internet data will flow from A to B and vice versa and the
internet connectivity will be assured to the device connected to the ‘B’ Powerline.
Supposed the Smart TV will be turned off and supposed the Powerline support the standby
mode, generally after a period of 10 minutes (this time might vary based on the purchased
model) the Powerline ‘B’ will start saving energy and go to sleep.
A necessary condition for the Powerline device to go into sleep mode is that no data shall be
transmitted to its Ethernet port for a certain period of time (model specific).
As soon as the Smart TV will be turned on (using the remote controller) and some data will be
sent over the Ethernet cable, the Powerline will ‘wake up’ and connectivity will be provided to
the smart TV.
Autres manuels NETGEAR Carte réseau
NETGEAR
NETGEAR XAV1201/XAVB1201 Manuel utilisateur
NETGEAR
NETGEAR MA 301 Manuel utilisateur
NETGEAR
NETGEAR GA620 - PCI Fiber Card Manuel
NETGEAR
NETGEAR WNCE4004 Manuel utilisateur
NETGEAR
NETGEAR DG814 - DSL Modem Internet Gateway Manuel utilisateur
NETGEAR
NETGEAR EA201 Manuel utilisateur
NETGEAR
NETGEAR GA511 - Gigabit Ethernet PC Card Manuel utilisateur
NETGEAR
NETGEAR WPN111 - RangeMax Wireless USB 2.0 Adapter Manuel utilisateur
NETGEAR
NETGEAR GA620 - PCI Fiber Card Manuel utilisateur
NETGEAR
NETGEAR GA621 Manuel utilisateur
NETGEAR
NETGEAR FA410TX - FA-410 Network Card Manuel utilisateur
NETGEAR
NETGEAR GA620 - PCI Fiber Card Manuel utilisateur
NETGEAR
NETGEAR WG111U - Double 108 Mbps Wireless USB 2.0... Manuel utilisateur
NETGEAR
NETGEAR MA701 - 802.11b 11 Mbps Compact Flash Card Manuel utilisateur
NETGEAR
NETGEAR GA621 Manuel utilisateur
NETGEAR
NETGEAR RangeMax WN511T Manuel utilisateur
NETGEAR
NETGEAR GA620 - PCI Fiber Card Manuel utilisateur
NETGEAR
NETGEAR HA501 HA501 HA501 Manuel utilisateur
NETGEAR
NETGEAR MA701 - 802.11b 11 Mbps Compact Flash Card Manuel utilisateur
NETGEAR
NETGEAR FA312 Manuel utilisateur
Manuels Carte réseau populaires d'autres marques
3Com
3Com EtherLink 3C509B Manuel utilisateur
TRENDnet
TRENDnet TEG-PCITX Manuel utilisateur
Cisco
Cisco MC16E Manuel utilisateur
Delta Electronics
Delta Electronics Braking Modules VFDB Series Manuel utilisateur
TwinMOS
TwinMOS Booming Manuel utilisateur
Dialogic
Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur
Buffalo
Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur
National Instruments
National Instruments NI 9234 Manuel utilisateur
Hama
Hama 49276 Manuel utilisateur
Linksys
Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation
Compaq
Compaq Wireless LAN 100 Manuel utilisateur
Bose
Bose PowerMatch Dante Manuel utilisateur