NETGEAR EA201 Manuel utilisateur

MODELEA 201

NetworkCard

InstallationGuide

Model EA201 Network Card Installation Guide

The instructions included in this guide are for installing the Model EA201 Network Card when

using Windows

95 or Windows for Workgroups (version 3.11). If you are using another network

operating system, follow the instructions in the text ﬁles in the readme folder on the EA201

Drivers and Diagnostics Disk.

These three easy steps provide information for installing your Model EA201 Network Card:

1. Verify Package Contents

2. Install the Network Card

3. Connect the Network Cables

As a last step, be sure to ﬁll out and send in your warranty card.

Start Here

Model EA201 Network Card Installation Guide

Unpack the contents of the package and make sure that you have everything.

Verify PC Requirements

The instructions given in this guide are for using the NETGEAR™ Model EA201 Network Card

in a PC that has a Microsoft

Windows 95 or Windows for Workgroups (v.3.11) operating system.

You must have a PC with:

• Windows 95 or Windows for Workgroups (version 3.11)

• An available ISA expansion slot

Verify Package Contents

Model EA201

Network Card

Category 5 10/100 Mbps

UTP cable (provided with

Model EA201C

Network Card)

Installation

guide, Warranty &

Owner Registration Card

Drivers and

Diagnostics Disk

8034FA

Model EA201 Network Card Installation Guide

1. Turn the power off and unplug the power cord from your computer.

2. Remove the PC cover.

3. Choose an available ISA slot (ISA slots are the longer slots) and remove the

corresponding back plate from the PC chassis.

4. Insert the network card into the ISA expansion slot.

5. Fasten the network card to the rear of the computer chassis by tightening the screw that

is on the PC.

6. Replace the PC cover and reconnect the power cord to the PC.

Note: Touch a grounded metal object to free yourself of static electricity before you

handle the network card.

Note: To avoid damaging any components on the network card, handle it by the edges,

using your thumbs to push it securely into the ISA slot. Make sure the network card is

fully inserted into the slot to prevent the PC operating system from freezing at startup.

Install the Network Card

Network card

8033FA

Back plate

removed

Model EA201 Network Card Installation Guide

Using the UTP cable that is supplied, connect any port on the hub to the port on the network card.

Note: One of the ports on NETGEAR hubs is switchable between Normal (MDI-X)

and Uplink (MDI) with a Normal/Uplink push button. If you are using this switchable

port on a NETGEAR hub to connect to a PC or the network card, make sure the

Normal/Uplink push button is set to Normal.

Connect the Network Cables

RJ-45

connector RJ-45

connector

PC with network

card installed Power adapter PC with network

card installed Printer

(optional)

*Use the cables provided or any Category 5 UTP cable.

Maximum length = 100 meters (300 feet)

Category 5 10/100 Mbps UTP cables*

Hub

Model EA201 Network Card Installation Guide

Model EA201 Network Card

Standards Compatibility

NetWare tested and approved

Microsoft Windows, Windows 95, Windows NT

compatible

PCI Plug-and-Play compatible

IEEE 802.3i, 10BASE-T Ethernet

Interface Options

RJ-45 connector

IRQ Options

3, 5, 9, 10, 11, 12, 15

Power Consumption

1W (+5V +/- 5% @ 630 mA maximum)

Physical Speciﬁcations

Dimensions 6.2 by 2.5 in.

15.8 by 6.3 cm

Weight 0.14 lb (63 g)

Environmental Speciﬁcations

Operating temperature 0

to 40

Operating humidity 10% to 90% noncondensing

Agency Compliance

CE mark, commercial

FCC, Part 15, Class B

EN 55 022 (CISPR 22), Class B

Canada ICES-003, Class B

Technical Specifications

Model EA201 Network Card Installation Guide

This guide provides you with instructions for installing the Windows 95 Network Driver. All

versions of Windows 95 might not respond with the same screens. Therefore, windows that are

different than those shown in these instructions might open but prompt you for the same

information, and windows might open in a different order than the order of the steps in these

instructions.

Before you proceed with the installation steps, decide on a name for your network and for

each PC (each name must be only one word).You also need to have the Windows 95 CD-ROM

and the EA201 Drivers and Diagnostics Disk ready to use in the installation process.

1. Turn on power to the computer and start Windows 95.

The new hardware is found and the driver is automatically loaded.

The “New Hardware Found” window is displayed.

Note:You must install the network card (instructions on other side of this guide) before

installing the network driver.

Note: If the “Insert Disk”window opens and the “Please insert the disk labeled

Windows 95...”message appears at any time during the installation process, insert the

Windows 95 CD-ROM in Drive D (the CD-ROM drive) and click on “OK.”Then

follow the next step in the instructions.

Install the Network Driver

New Hardware Found

NETGEAR EA201 Ethernet Card

Windows has found new hardware and is installing the software for it.

Install the Network Driver

Model EA201 Network Card Installation Guide

Insert the EA201 Drivers and Diagnostics disk in Drive A and click on “Next.”

Click on “Finish.”

< Back Next> Cancel

Update Device Driver Wizard

This wizard will complete the installation of:

by searching your local drives, network, and Internet

locations for the most current driver.

If you have a disk or CD-ROM that came with this device,

insert it now.

NE2000 Compatible

It is recommended that you let Windows search for an

updated driver. To do this, click Next to continue.

Model EA201 Network Card Installation Guide

Type A:\ in the “Copy ﬁles from” entry ﬁeld and click on “OK.”

Click on “OK.”

Cancel

Skip File

Details...

Browse...

Copying Files...

The file 'NETEA201.inf' on Windows 95

CD-ROM could not be found

Insert Windows 95 CD-ROM into the drive

selected below, and click OK.

Copy files from:

C:\\WIN95

Network

You must provide computer and workgroup names that will identify this

computer on the network.

Model EA201 Network Card Installation Guide

Enter a name (different for each computer) in the “Computer name”entry ﬁeld, enter a

workgroup name (the name of your entire network) in the “Workgroup”entry ﬁeld,

and click on “OK”or “Close.”(If you have previously named your computer and

network, the options on the window may vary slightly and could be either “OK”or

“Close.”)

Insert the Windows 95 CD-ROM and click on “OK.”

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NETGEAR Carte réseau

NETGEAR

NETGEAR FA510 - 32-Bit 10 And 100 Mpbs PCMCIA Network... Manuel utilisateur

NETGEAR

NETGEAR XAVB6504 Manuel utilisateur

NETGEAR

NETGEAR XAV1201/XAVB1201 Manuel utilisateur

NETGEAR

NETGEAR GA621 Manuel utilisateur

NETGEAR

NETGEAR MA701 - 802.11b 11 Mbps Compact Flash Card Manuel utilisateur

NETGEAR

NETGEAR PL1010 Manuel utilisateur

NETGEAR

NETGEAR FA312 Manuel utilisateur

NETGEAR

NETGEAR PA301 Manuel utilisateur

NETGEAR

NETGEAR GA620 - PCI Fiber Card Manuel utilisateur

NETGEAR

NETGEAR WNCE4004 Manuel utilisateur

NETGEAR

NETGEAR RangeMax WPN311 Manuel utilisateur

NETGEAR

NETGEAR FA311 - 10/100Mbps PCI Ethernet Interface... Manuel utilisateur

NETGEAR

NETGEAR GA620 - PCI Fiber Card Manuel

NETGEAR

NETGEAR PLW1000 Manuel utilisateur

NETGEAR

NETGEAR MA 301 Manuel utilisateur

NETGEAR

NETGEAR GA620 - PCI Fiber Card Manuel utilisateur

NETGEAR

NETGEAR GA511 - Gigabit Ethernet PC Card Manuel utilisateur

NETGEAR

NETGEAR HA501 HA501 HA501 Manuel utilisateur

NETGEAR

NETGEAR FA410TX - FA-410 Network Card Manuel utilisateur

NETGEAR

NETGEAR Orbi RBS40 Manuel utilisateur

NETGEAR

NETGEAR FA310TX - 10/100Mbps Fast Ethernet PCI Card Manuel utilisateur

NETGEAR

NETGEAR GA 620T Manuel utilisateur

NETGEAR

NETGEAR GA622T - Copper Gigabit Ethernet Card Manuel utilisateur

NETGEAR

NETGEAR RangeMax WN511T Manuel utilisateur

Manuels Carte réseau populaires d'autres marques

FirstComm

FirstComm OBiWiFi5G Manuel utilisateur

Sun Microsystems

Sun Microsystems Interface Adapter Manuel utilisateur

TRENDnet

TRENDnet TU2-ETG Manuel utilisateur

YASKAWA

YASKAWA SI-EN3 Manuel utilisateur

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuel utilisateur

Belkin

Belkin F5D7050 Manuel utilisateur

3Com

3Com EtherLink 3C509B Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITX Manuel utilisateur

Cisco

Cisco MC16E Manuel utilisateur

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuel utilisateur

TwinMOS

TwinMOS Booming Manuel utilisateur

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur

National Instruments

National Instruments NI 9234 Manuel utilisateur

Hama

Hama 49276 Manuel utilisateur

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation

Compaq

Compaq Wireless LAN 100 Manuel utilisateur

Bose

Bose PowerMatch Dante Manuel utilisateur