NETGEAR ProSafe FVS318N Manuel utilisateur
Installation Guide
ProSafe Wireless N VPN Firewall FVS318N
Follow these instructions to set up your VPN firewall.
•For cable modem service. You must set up the VPN firewall using the same
computer you used when you first set up your internet connection.
•For DSL service. To set up the VPN firewall, you might need information such
as your DSL service login name and password.
Package Contents
The VPN firewall package contains:
•FVS318N VPN Firewall
•Ethernet cable
•Rubber feet
•Power adapter
•Installation guide
•Resource CD
Connect the VPN Firewall
1. Connect the cables between the VPN Firewall, computer, and modem.
a. Turn off your computer.
b. Turn off and unplug the modem.
c. Locate the cable (cable 1 in the diagram) that connects your modem and
computer.
d. Disconnect the cable at the computer end only, point Ain the diagram.
e. Insert the cable from your modem (cable 1 in the diagram) into the WAN
port of the VPN firewall as shown in point B of the second diagram.
f. Insert the cable that came with your VPN firewall (the NETGEAR cable in
the next diagram) into a LAN port on the VPN firewall, such as LAN
port 1 (point C in the diagram). Insert the other end into the LAN port of
your computer (point D in the diagram).
Your cables are connected, and you are ready to restart your network.
2. Restart your network in the correct sequence.
WARNING: Failure to restart your network in the correct sequence could prevent
you from connecting to the Internet.
a. Plug in the power cord to your modem, turn it on, and wait 2 minutes.
b. Plug in the power cord to your VPN firewall, turn it on, and wait 1 minute.
c. Turn on your computer.
Cable 1
ModemComputer
WAN port
NETGEAR cable
VPN firewall
Local portsComputer
Note: For DSL customers, if ISP-provided software logs you in to the Internet, do not
run that software. You might need to go to the browser Tools menu, Internet Options,
Connections tab, and disable auto dialing.
d. To verify that the VPN network is operating correctly check the VPN firewall
LEDs:
•Power.The Power LED should turn solid green. If it does not turn solid
green, check that the power adapter is connected to an AC outlet.
•Test. The Test LED lights when the router is first turned on and then goes
off. If after 2 minutes it is still lit, see the Troubleshooting Tips in this guide.
•WAN. The WAN port LED should be lit. If it is not, make sure that the
Ethernet cable is attached to the VPN firewall WAN port and the modem.
Also, make sure that the modem is powered on.
•LAN. Each LAN port has two LEDs. The green LED on the upper left
indicates network activity. The right LED indicates communication speed.
It is green for 1000 Mbps, amber for 100 Mbps, and off for 10 Mbps. If the
LAN port LED is not on, check that the Ethernet cable from the computer
to the firewall is attached at both ends, and that the computer is on.
Configure the VPN Firewall for Internet
Access
Use your browser to access and configure the FVS318N.
1. From the computer, open a browser such as Internet Explorer. With the VPN
firewall in its factory default state, type http://192.168.1.1 in the browser
address bar and click Enter. The login screen displays.
LAN Ports WAN
Power Test
FVS318N_IG.fm Page 1 Thursday, December 20, 2012 10:51 AM
December 2012
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to
change without notice. Other brand and product names are registered trademarks or trademarks of their
respective holders. © NETGEAR, Inc. All rights reserved.
Intended for indoor use only in all EU member states, EFTA states, and Switzerland.
2. Enter admin for the user name and password for the password, both in
lowercase letters, and click Login. The Router Status screen displays.
3. If you need to change settings, select Network Configuration, enter settings
for your network, and click Apply.
4. You can click Broadband Status in the upper right of the screen to display the
Connection Status screen.
5. If you are not connected, click Connect on the Connection Status screen to
connect to the network.
Troubleshooting Tips
Make sure that the network settings of the computer are correct.
•Some cable modem ISPs require you to use the MAC address of the computer
registered on the ISP account. The VPN firewall automatically detects your
computer MAC address. If you are not using the computer registered with your
ISP, see the reference manual to manually enter the correct MAC address.
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and
use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR website.
For product updates and web support, visit http://support.netgear.com.
NETGEAR recommends that you use only the official NETGEAR support
resources.
You can get the reference manual online at http://downloadcenter.netgear.com or
through a link in the product’s user interface.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
FVS318N_IG.fm Page 2 Thursday, December 20, 2012 10:51 AM
Autres manuels pour ProSafe FVS318N
10
Table des matières
Autres manuels NETGEAR Pare-feu
NETGEAR
NETGEAR STM150 - ProSecure Web And Email Threat Management... Manuel utilisateur
NETGEAR
NETGEAR ProSafe FVX538 Manuel utilisateur
NETGEAR
NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Manuel utilisateur
NETGEAR
NETGEAR ProSafe FR114P Manuel utilisateur
NETGEAR
NETGEAR FVS318 - ProSafe VPN Firewall Router Manuel utilisateur
NETGEAR
NETGEAR ProSAFE FVS336G v3 Manuel utilisateur
NETGEAR
NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Instructions d'installation et d'utilisation
NETGEAR
NETGEAR FVL328 - Cable/DSL ProSafe VPN Firewall... Guide d'installation
NETGEAR
NETGEAR ProSafe FVS318v3 Manuel utilisateur
NETGEAR
NETGEAR ProSafe FVX538 Manuel utilisateur
NETGEAR
NETGEAR ProSafe FVS318N Manuel utilisateur
NETGEAR
NETGEAR FVS124G - ProSafe VPN Firewall 25 Manuel utilisateur
NETGEAR
NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet... Manuel utilisateur
NETGEAR
NETGEAR FVS318 - ProSafe VPN Firewall Router Manuel utilisateur
NETGEAR
NETGEAR ProSafe VPN Firewall 200 FVX538 Manuel utilisateur
NETGEAR
NETGEAR ProSafe FVS318N Manuel utilisateur
NETGEAR
NETGEAR ProSafe FVX538 Manuel utilisateur
NETGEAR
NETGEAR FVS124G - ProSafe VPN Firewall 25 Manuel utilisateur
NETGEAR
NETGEAR ProSafe FM114P Manuel utilisateur
NETGEAR
NETGEAR ProSafe FR328S Manuel utilisateur
